Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across Weatherford
When your electric gate stops opening, starts beeping, or drags against the ground, you need a repair crew that knows Weatherford’s specific gate problems. Most electric gate repairs in Weatherford run $165 to $385 before parts, and we typically reach homes across the city within 90 minutes of your call. Calder Gate Repair handles everything from dead keypads to full operator replacements, and every job starts with a written price before we touch a single bolt. Call (903) 417-0793 and you’ll get a live person, not a voicemail.

Why Calder Gate Repair Is Weatherford’s Preferred Electric Gate Repair Company
Weatherford homeowners call us because we treat gate repair like a real trade, not a side hustle. We’re part of the Weatherford service network inside the Relay Home Co. family, established 2009 and independently owned and operated. Our techs show up in uniform, background-checked, with a trackable arrival time sent to your phone before dispatch – no four-hour windows, no unanswered calls.
What actually sets us apart in Weatherford is how we document everything. You get before-and-after photos of the repair, a digital invoice you can pay from a link, and a written guarantee on every job. We trained our techs on nine major opener brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate isn’t fixed right, our 365-Day Done Right Promise kicks in and we come back free.
Nico Alvarez, who leads Calder Gate Repair, built the Weatherford routes around one rule: the number quoted at the door is the number on the invoice. Always. That’s why local property managers and homeowners on both sides of the tracks keep our number saved.
Gate Access Control in Weatherford
Gate Access Control in Weatherford covers keypads, telephone entry systems, vehicle loop detectors, and the wiring that ties them to your gate operator – essentially everything that tells the gate who gets in and when. We see this work on shared ranch entrances off Tin Top Road, gated communities near Lake Weatherford, and commercial lots along South Main Street. When a keypad dies at the road, you’re either stuck opening the gate manually or leaving it propped open, and neither is acceptable for long.
Most access control repairs in Weatherford run $120 to $290 for a keypad swap or keypad relocation, and loop detector replacements typically fall between $240 and $430. Solar-powered keypad setups on rural acreage often need a battery and charge controller upgrade rather than a full panel replacement. We quote the exact fix and parts cost before we start.
Keypad and Intercom Replacement
A Weatherford homeowner with a dead keypad at the driveway usually needs either a corroded wiring splice repaired or the whole keypad replaced and re-programmed. We carry common keypad models and weatherproof enclosures on the truck, so most keypad jobs are finished in one visit.
Loop Detector and Exit Wand Setup
Properties with automatic exit lanes need a working loop detector buried in the asphalt, and in Weatherford’s clay soil we often find cracked loop wires from years of ground movement. We trench, splice, and re-seal these properly so the gate actually opens when a vehicle pulls up.
Commercial Gate Operator in Weatherford
Commercial Gate Operator work in Weatherford runs heavier than residential: slide gates, cantilever gates, and high-cycle swing operators at apartment complexes, storage facilities, and ranch entrances along FM 920 and Interstate 20 frontage roads. These operators cycle dozens or hundreds of times daily, so a worn limit switch, a failing capacitor, or a stripped gearbox shows up fast. Most commercial operator repairs in Weatherford run $280 to $650 before parts, depending on the operator class and whether we’re rebuilding or replacing.
We service Linear, Viking, and DoorKing commercial operators regularly, and we stock common control boards, loop detectors, and safety photo-eye kits for these brands in our Weatherford-area trucks. We also know the city’s permitting expectations for new commercial gate installations and can walk you through what’s needed before we dig.
Slide Gate Track and Roller Repair
Weatherford’s expansive clay soil shifts more than most people expect, and that means slide gate tracks that were once level now hump or sag. We re-level tracks, replace seized roller assemblies, and re-square gate frames when needed.

Operator Replacement for High-Cycle Gates
When a commercial operator is beyond rebuilding, we spec a replacement sized for the actual cycle count, not just the gate weight. That means fewer breakdowns at the worst possible time – like Friday afternoon when the storage facility is full of tenants trying to get in.
Trusted Brands We Service in Weatherford
Calder’s techs are factory-familiar with nine major opener brands, but we work with what’s installed, not what’s convenient. In Weatherford we see a lot of LiftMaster and FAAC on newer homes, BFT and DoorKing on commercial properties, and Viking and Linear on gates that were installed 15 or 20 years ago and simply refuse to die. We stock common parts for Ghost Controls and Mighty Mule units locally, which saves you a multi-day wait when a control board fails. If your opener isn’t on that list, call anyway – a live person answers 24/7 and will tell you straight whether we can source parts for it.
Common Electric Gate Repair Problems We See in Weatherford Homes
- Swing gates that stop halfway and beep. This is almost always a safety sensor or limit switch issue – the gate thinks something is in the way. On older Weatherford homes we often find fogged photocells or drifted limit cams, and the fix is usually under $200.
- Gates that sag and drag on one side. In Weatherford’s expansive clay, the hinge post footing moves seasonally, and the gate leaf sags even when the frame itself is fine. We re-set the post and re-square the gate instead of just patching the panel.
- Solar gate openers that die after cloudy stretches. Rural Weatherford acreage gates on solar often have a battery bank that’s undersized for the gate’s daily cycles. The operator isn’t dead – it’s starved for power. We size and install a proper battery bank so the gate cycles even after several overcast days.
- Older 120V operators that act like the control board failed. Historic downtown Weatherford properties often run swing operators on aging circuits, and voltage drop can mimic a dead board. We verify incoming power at the operator before condemning anything, which has saved a lot of customers from buying a board they didn’t need.
Pricing for Electric Gate Repair in Weatherford, TX
Here’s what we actually charge in Weatherford. Keypad replacement runs $120 to $290. Photocell or safety sensor repair runs $140 to $260. Limit switch adjustment or replacement runs $165 to $285. Control board replacement runs $240 to $480 depending on brand. Full operator replacement starts around $700 and can reach $1,800 for heavy commercial units. Every estimate is free, written, and locked before work starts.
Three things affect your final price: the brand of operator you have, whether we’re repairing or replacing, and how far into the county your gate sits. Call (903) 417-0793 and we’ll quote the job over the phone in most cases.
We Also Serve Cities Near Weatherford
Our Electric Gate Repair team covers the Weatherford area and the surrounding communities, including Aledo, Springtown, Azle, and Mineral Wells. If your gate is acting up and you’re anywhere nearby, call us – we dispatch local crews to all of these areas weekly.
Serving Weatherford, TX - Our Local Coverage Area
We’re based in the Weatherford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Weatherford
The beeping means your gate’s safety system detected an obstruction or lost its limit setting. On older swing gates in Weatherford, we usually find a fogged photocell or drifted limit cams – the small sensor that tells the gate when to stop. We re-aim the photo-eye, reset the travel limits, and run the UL 325 reversal test twice before calling it done. Most of these repairs run $150 to $260. If your gate is beeping now, call (903) 417-0793 and we’ll walk you through what you’re seeing.
In Weatherford it’s usually the post. The expansive clay soil here moves with moisture, and a hinge post that looked straight two years ago can shift enough to drag a gate leaf. On a recent job off Santa Fe Drive, our tech found a LiftMaster swing gate that had stopped reversing on a hot afternoon. The limit cams had drifted and the photocell was fogged, but the real cause of the sag was a loose hinge post footing. We re-set the post and corrected the sag instead of patching the panel, then re-aimed the photo-eye, reset the travel limits, and ran the reversal test twice. The customer also had a sagging gate leaf, and we traced it to that loose post, not the frame. Expect to pay $200 to $500 to re-set a post and re-square the gate, depending on how far it’s moved.
Yes, we service all of those brands and Mighty Mule. Our techs carry common control boards and safety sensors for Linear, Viking, Ghost Controls, and DoorKing in our Weatherford-area trucks, so many repairs are same-visit. If we don’t have your part, we source it fast and give you a real arrival time for the follow-up.
Yes. Commercial operators are built for high cycle counts, heavier gates, and continuous duty. A residential swing operator on a commercial gate fails fast. In Weatherford, apartment complexes and storage facilities need the right operator class and proper safety edges, and we spec by cycle count, not gate weight. Commercial repairs run $280 to $650 before parts. If you’re unsure what class your property needs, call (903) 417-0793 and we’ll help you figure it out.
A proper installation includes groundworks and concrete footings for the gate posts, the operator itself, power run from the nearest source, safety photo-eyes, a reverse mechanism tested to UL 325 standards, and keypad or intercom entry at the road. On rural Weatherford acreage, that often means solar panels, a properly sized battery bank, and a long wire run for the keypad at the road. On tight historic downtown driveways, it means a compact swing operator that doesn’t intrude into the driveway. Installations are measured and scheduled, never rushed. We give a free measure, a written price, and a timeline before we commit to anything.
Call Calder Gate Repair at (903) 417-0793 for a free estimate on any electric gate repair in Weatherford. A live person answers 24/7, and your price is in writing before we start.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Weatherford through the Relay Home Co. network.





Before
After
Before
After
Before
After