Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across Wimauma
Electric gate repair in Wimauma typically costs $180 to $480 for most opener and sensor fixes, with control board replacements running $350 to $800 depending on the brand. Most repairs are done the same day we diagnose the issue. If your gate won’t open, stalls mid-travel, or refuses to close, call Calder Gate Repair at (903) 417-0793 and a live person answers, 24/7.

We know Wimauma’s streets, its subdivision layouts, and the way a gate behaves differently on a rural acre lot off Lightfoot Road than it does in a new-build community near Ayersworth Glen. That local knowledge means our technicians arrive already understanding what they’re likely to find. You get a written price before any work starts, a trackable arrival time, and a repair backed by the 365-Day Done Right Promise.
Why Calder Gate Repair Is Wimauma’s Preferred Electric Gate Repair Company
Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, founded in 2009. We’re not a general handyman service that occasionally touches a gate opener. Gate repair is what we do all day, every day, and our technicians are factory-familiar with nine major opener brands, including FAAC, BFT, and Linear, the three we see most often on Wimauma properties.
Every job carries three non-negotiable guarantees. First, you get a written price before any work starts. The number on the invoice is the number we agreed to at the door. Second, every repair carries a written guarantee. Third, if that repair fails within 365 days, we return at no charge. That’s the 365-Day Done Right Promise, and it’s stated in writing on every job, not implied.
When you book, you get a live arrival time you can track, not a four-hour window. Our technicians are background-checked and arrive in uniform. And when you call at 2 a.m. because your gate is stuck open and your dog is eyeing the road, a real person answers. Not a voicemail. Not a chatbot.
Gate Access Control in Wimauma
Gate access control in Wimauma means the full system that decides who gets in: the keypad, remote controls, safety sensors, intercom if you have one, and the brain inside the operator that ties them together. It’s not just fixing a remote that stopped working. It’s making sure every entry point works as a system, so the gate opens when it should and, more importantly, refuses to close on someone or something in its path. A complete access control service call in Wimauma runs $150 to $400 for keypads and remotes, and $350 to $800 when a control board needs replacement.
Wimauma’s mix of property types changes what access control actually means. A homeowner on a horse property off Balm-Wimauma Road with a long driveway needs a different setup than someone in a subdivision where the gate sits ten feet from the street. We quote based on what you actually need, not a packaged list.
Keypad and Remote Programming
Adding a new remote, deleting an old one, or reprogramming a keypad after a tenant moves out is a 30 to 60 minute job in most Wimauma homes. We also handle cases where a keypad works intermittently because the housing has cracked and Florida humidity is inside the wiring. Expect $90 to $180 for a standard service call that includes programming and testing all existing devices.
Intercom and Phone-Based Entry
For properties with a gate intercom or a phone-line entry system, access control includes testing the relay that actually triggers the opener. In Wimauma, afternoon thunderstorms can cause a ground fault on older phone-line systems, leaving you unable to buzz anyone in even though the gate itself opens fine from a remote. We trace that fault and repair or replace the relay, typically $180 to $320.
Commercial Gate Operator in Wimauma
A commercial gate operator in Wimauma is a heavier-duty motor and control system than what you’d find on a residential driveway gate, and it’s what farms, equestrian properties, nurseries, and small commercial sites across the area rely on. These units cycle more often, carry heavier gates, and fail differently than residential openers. Commercial operator repair in Wimauma typically runs $280 to $650 for motor and control work, with full operator replacements running $1,800 to $4,500 depending on gate length, weight, and access requirements.
On Wimauma’s agricultural and light-commercial properties, we see operators that have been in service for ten or fifteen years and were never wired to modern UL 325 entrapment standards. That’s a real compliance gap and a liability we correct as part of any repair. You should never be told a commercial gate is “fine” when it lacks working photo-eyes or a functioning safety edge.

Heavy-Duty Slide and Cantilever Gates
Slide gates on Wimauma farm entrances and nursery yards take a beating from sand, debris, and daily cycling. The common failure points are the drive chain, the limit switch (the small sensor that tells the gate when to stop), and the motor capacitor. We stock common replacement parts for BFT and FAAC commercial operators, which shortens turnaround time meaningfully.
Ground Loop and Vehicle Sensor Repair
Many Wimauma commercial gates use an in-ground loop detector to open automatically for vehicles. Loop failures mean the gate sits closed or opens erratically, and diagnosing that requires a loop tester, not guesswork. If a loop is dead due to root intrusion or a cut wire, we install a replacement loop or convert to a photo-beam system, typically $350 to $700.
Trusted Brands We Service in Wimauma
Our technicians are factory-trained on FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Wimauma because we see such a mix: FAAC hydraulic operators on older estate gates, BFT on newer slide gates, Linear on mid-2000s residential installs. We stock common parts and control boards for these brands locally, which means faster repairs than a shop that has to order everything in. And because we work on all of them, we’ll never pressure you into replacing a perfectly repairable FAAC just because we don’t carry the part.
Common Electric Gate Repair Problems We See in Wimauma Homes
- Afternoon stalling with no fault code. Voltage sag on shared well-and-pump circuits in older Wimauma rural-residential properties causes slide gate operators to stall or reset mid-cycle without throwing an error code. The gate works fine in the morning and fails when the irrigation pump kicks on. The fix is usually a dedicated circuit, not a new operator.
- Gate sag at the hinge post, not the panel. Sandy, high-water-table soil on new-build lots means the post itself settles unevenly. The panel looks straight, but the gate sags at the pivot. Replacing the panel without fixing the footing means the same service call in six months.
- Missing entrapment protection inherited from a prior owner. Photo-eyes misaligned by weed growth, or safety edges that were never wired in, leave a gate that violates UL 325 and could close on a person, a child, or an animal. We find this on a meaningful percentage of Wimauma gates we’re called to for “unrelated” work.
- Keypad or remote works only from ten feet away. That’s usually a failing receiver board or antenna damage from Florida sun exposure, more than a dead battery. We test signal strength and replace the receiver module rather than selling you a whole new opener. Expect $120 to $260 for receiver repairs.
Pricing for Electric Gate Repair in Wimauma, FL
Here’s what you’re actually looking at in Wimauma, FL. Remote and keypad repairs run $90 to $180. Safety sensor alignment or replacement runs $140 to $280. Limit switch replacement runs $120 to $240. Control board replacement runs $350 to $800 depending on the brand, with BFT and FAAC boards at the higher end. Full gate operator replacement, including labor, typically runs $1,200 to $3,800 for a residential swing or slide gate.
A note on the way we quote: the price is written down and agreed to before a single bolt is turned. That’s not an optional add-on. It’s how every Calder Gate Repair job works. Call (903) 417-0793 for a free estimate, and you’ll know the number before you decide anything.
We Also Serve Cities Near Wimauma
While this page is about Electric Gate Repair in Wimauma, our Electric Gate Repair team regularly dispatches to Balm, Ruskin, Apollo Beach, and Sun City Center. If your property sits close to a city line, call (903) 417-0793 and we’ll confirm coverage and give you an exact arrival window.
Serving Wimauma, FL - Our Local Coverage Area
We’re based in the Wimauma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Wimauma
The hinge post has almost certainly settled, and the panel just looks fine because it’s rigid. Wimauma’s sandy soil and high water table cause posts to settle unevenly, especially on new-build lots where footings were poured quickly. The panel stays straight, but the pivot shifts, and the gate sags. The fix is resetting the post, which runs $300 to $700 depending on the footing. Call (903) 417-0793 and we’ll put eyes on it.
You’re on a shared electrical feed with a well pump or irrigation controller, and voltage sags when that pump kicks on in the afternoon. This is common on older Wimauma rural-residential properties. The operator’s logic board resets without throwing a fault code because the power never fully cuts. The fix is a dedicated circuit, typically $350 to $600. Call (903) 417-0793 for a diagnosis.
We service all nine major brands we’re trained on: FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. On Wimauma residential gates, we most often see Linear, LiftMaster, and FAAC. We stock common parts locally, so you’re not waiting on a parts shipment. Call (903) 417-0793 and tell us what’s on your gate.
Yes, every automatic gate in Wimauma needs working entrapment protection, period. That’s photo-eyes and a safety edge, per UL 325. If your gate was inherited from a prior owner and the photo-eyes are misaligned or the edge was never wired in, that’s a compliance gap and a real liability. We check this on every service call, and correcting it runs $140 to $320. Call (903) 417-0793 to schedule a safety check.
No, a proper installation isn’t a same-day job, and anyone who tells you it is is cutting corners. A new gate in Wimauma requires site prep, concrete work for posts, a power run, operator mounting, safety edge wiring, and full reversal testing. That’s a measured, scheduled job, typically three to seven days of planning before installation. What you get the day we visit is a free measure and a written price. Call (903) 417-0793 to book that measure.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family, serving Wimauma and surrounding South Hillsborough County.





Before
After
Before
After
Before
After