Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across Windsor
Electric gate repair in Windsor typically costs $180 – $340 for a service call and diagnosis, with most opener motor replacements running $450 – $950 depending on the brand. If your gate won’t open, reverses mid-travel, or the keypad has gone dark, you want a technician who knows Windsor’s specific soil and weather conditions, not someone reading a generic manual. Our Electric Gate Repair team serves Windsor neighborhoods including the newer subdivisions east of Hembree Lane, the larger lots off Brooks Road, and the rural properties near Shiloh Road. Call (903) 417-0793 and a live person answers, day or night.

Why Calder Gate Repair Is Windsor’s Preferred Electric Gate Repair Company
Windsor Gate Repair starts with diagnosis: we figure out what’s actually failing before we touch a single bolt. Around here, a gate that won’t close in February is often not an opener problem at all. It’s the hinge post heaving in the adobe clay. That level of local knowledge comes from years of working this specific terrain, and it’s why our work holds up through Windsor’s wet winters and dry summers.
Every Windsor job gets the three Calder guarantees in writing. A written price before any work starts. A written 365-Day Done Right Promise on every repair. And a free second visit if the repair fails within that year. No fine print, no “we’ll see what we find.” Nico Alvarez built Calder Gate Repair inside the Relay Home Co. family, established 2009, to bring rideshare-level transparency to gate repair. That means a background-checked, uniformed technician with a live, trackable arrival time. You’ll see exactly who’s coming and when they’ll pull up.
We answer the phone 24/7 with a real human who can book, update, or troubleshoot on the spot. Windsor customers get written, before-and-after documentation and a digital invoice you can pay from a link.
Electric Gate Motor in Windsor
An Electric Gate Motor in Windsor takes more abuse than you might think. When an opener burns out or strips its internal gears, the gate either won’t move, moves halfway and stops, or makes a grinding sound that tells you something’s chewing itself apart. On Windsor gates, motor failure often isn’t the root cause. If the gate has shifted out of plumb because the post heaved in our expansive clay, the motor works harder every single cycle until it fails prematurely. That’s why we check the post, the geometry, and the load before we swap a motor. Replacing the motor without fixing the binding is spending money twice.
Most gate opener motor replacements in Windsor run $450 – $950, including the motor, labor, and re-testing of limit switches and safety systems. The final number depends on the brand (FAAC, BFT, Linear, and Viking motors each have different pricing) and whether we’re matching an existing model or switching to something more durable for your conditions.
Slide Gate Motor Replacement
Slide gates in Windsor’s newer developments and rural lots use a rack and pinion drive. The motor drives a gear along a toothed rail. When gravel, leaves, or a slightly out-of-adjustment gate has chewed the rail teeth, the motor strains and the gate jerks or stalls. We inspect the rail before quoting a motor swap so you’re not paying to fix the symptom.
Swing Gate Operator Diagnostics
Swing gate operators here need more than a part swap. We run the operator through a full load test, check the hinge post with a level and plumb line, and confirm the arm geometry is correct. A Windsor swing gate that was fine in August can bind by December when the clay expands and twists the post. We fix that, not just the motor.
Gate Access Control in Windsor
Gate Access Control in Windsor covers the keypads, remote radios, loop detectors, and intercom systems that tell your gate when to open and for whom. Most failures show up as a keypad that won’t respond, a remote that worked yesterday and now won’t, or a gate that won’t close automatically after a car passes. On Windsor properties with any decent tree canopy, we see control boards and keypads fail from moisture intrusion and power dips that happen during winter storms. A gate with an exposed east-facing keypad off Foothill Drive takes a beating from morning sun and rain cycles.
Keypad and remote troubleshooting in Windsor typically starts at $95 – $180. A new access control board can run $250 – $500 installed, depending on the system. We always quote the exact number in writing before we touch anything.
Keypad and Intercom Entry
Windsor homes with longer driveways, especially in the rural pockets north of town, rely on gate keypads for guests, deliveries, and workers. When a keypad dies, we test the power, the wiring, and the board before replacing parts. Some older systems use phone-line intercoms that are no longer supported, and we’ll explain your upgrade options in plain language.

Vehicle Detection and Loop Systems
If your gate opens for some cars but not others, the loop detector under the pavement is usually the culprit. Windsor’s clay soil holds water, and a cracked loop wire after a wet winter can send false signals or none at all. We diagnose loop faults before replacing expensive boards that might be perfectly fine.
Trusted Brands We Service in Windsor
Our techs are factory-familiar with nine major gate opener brands, and on this page we’ll name the ones we see most on Windsor gates: FAAC, BFT, Linear, and Viking. Whether you’ve got a FAAC swing operator on a large lot off Brooks Road or a Viking slide gate on a vineyard-adjacent property near Shiloh, we stock common parts locally and can usually have specialty boards in fast. Calder Gate Repair was built inside Relay Home Co. to be the dedicated gate specialist, and that means we don’t guess at brands we don’t know. We service what you own.
Common Electric Gate Repair Problems We See in Windsor Homes
- Hinge post heave from expansive clay soil. Windsor’s adobe clay swells with winter rain and shrinks in summer. Posts lift or tilt by a quarter inch or more, which binds the gate and trips the operator’s obstruction sensing or burns out the motor over time. We check footing depth and plumb before quoting any motor or board work.
- Photocell misalignment or failed safety edges after windstorms. Windsor gets strong wind through the Russian River corridor, and a bumped safety edge or shifted slide gate track will stop the operator from closing. A gate that reverses right before it shuts often has a photocell or edge problem, not a motor problem.
- Control board and loop detector failures on tree-lined and rural lots. Properties with live oak canopy and open exposure see moisture in housings and power dips that take out keypads, boards, and loop detectors. We open the enclosure, check for corrosion and loose terminals, and test the board on the bench before calling it dead.
- Rack and pinion wear on slide gates. Gravel, leaves, and debris from Windsor driveways chew the rail teeth on slide gates. A gate that lurches forward or makes a clicking noise at the end of travel usually has stripped rack teeth or a worn drive gear, and running it longer makes the motor work harder than it should.
We were called to a Windsor property off Brooks Road where a LiftMaster swing gate operator was reversing mid-travel and flashing a fault code. The gate looked fine from the driveway, but a level check showed the hinge post had heaved about a quarter inch over the wet season and thrown the gate out of plumb, binding the operator arm and tripping its obstruction sensitivity. We corrected the sag at the hinge post, re-set the operator arm geometry, and re-tested the safety photocells and UL 325 reversal. The gate ran the full cycle cleanly after that. The takeaway for any Windsor homeowner: fix the post and groundworks first, or you’ll be back twice.
Pricing for Electric Gate Repair in Windsor, CA
Here’s what Windsor homeowners should expect to pay. A service call and diagnostic runs $95 – $150, and the technician applies that to any repair you approve on the spot. Electric Gate Repair in Windsor work we quote honestly: keypad replacement $180 – $320, safety photocell replacement $150 – $280 per pair, gate motor replacement $450 – $950, and control board replacement $250 – $500. A full gate motor and post reset, common after soil movement, can run $600 – $1,100 when it includes re-setting the post footing or re-hanging the gate. Every price is written down, agreed before we start, and the invoice matches. Free estimates always. Call (903) 417-0793.
We Also Serve Cities Near Windsor
Calder Gate Repair covers Windsor and the surrounding Sonoma County communities. Our Windsor customers often refer us to friends with gates in Healdsburg, Santa Rosa, Sebastopol, and Guerneville. Same written pricing, same 365-Day Done Right Promise, same live-person phone answer.
Serving Windsor, CA - Our Local Coverage Area
We’re based in the Windsor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Windsor
In Windsor, the most common cause is a misaligned photocell or a failed safety edge, followed closely by hinge post heave from our expansive clay soil. The post shifts seasonally, the gate goes out of plumb, and the operator’s obstruction sensitivity sees the extra resistance and reverses the gate. We diagnose both possibilities before recommending a fix. Call (903) 417-0793 for a free estimate.
A proper electric gate installation in Windsor takes one to three scheduled visits and is not a same-day job. Groundworks, post setting below the clay zone, power runs, and safety testing all take measured time. Anyone promising same-day installation on a new gate is skipping something important. We schedule a free site measure and give you a written, staged price. Call (903) 417-0793 to book the measure.
We service nine major opener brands, including FAAC, BFT, Linear, and Viking, which are the ones we see most often on Windsor gates. We also work on LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians are factory-familiar with each brand’s wiring, programming, and common failure points, and we stock local parts for faster turnaround. Call (903) 417-0793 with your brand and we’ll tell you straight what to expect.
Yes. Any automatic gate in Windsor must have working entrapment protection that meets UL 325 standards. That means photocells and a reversing mechanism that stops and reverses the gate if it contacts an obstruction. Our technicians test these on every repair, because a gate that reverses on a child or pet is a safety system failure, not just an inconvenience. We include safety testing in every Windsor repair quote.
Every quote includes a written diagnostic report, a specific line-item price for parts and labor, safety system testing, and the 365-Day Done Right Promise in writing. If the repair fails within 365 days, we return at no charge. The number we quote is the number on the invoice, full stop. Estimates are free, so call (903) 417-0793 and get a real number before you commit.
When your Windsor gate quits, don’t guess and don’t wait. We answer live 24/7, we show up when we say we will, and every job starts with a written price you approve first. Call (903) 417-0793 now for a free estimate from a technician who actually knows Windsor’s soil, weather, and gate problems.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Windsor and Sonoma County with electric gate repair, opener repair, and access control since the Relay Home Co. family was founded in 2009.





Before
After
Before
After
Before
After