Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Ennis, TX
Calder Gate Repair handles gate repair, electric gate repair, and gate opener repair throughout Ennis, TX, with a written price agreed before any work starts. Most Ennis properties combine older ranch-style homes on larger lots with newer subdivisions, which means we see everything from 20-year-old slide gates to recent swing gate installations. If your gate won’t open or has sagged off its hinges, call (903) 417-0793 and a live person answers, day or night.
Why Ennis Homes Are Different
Ennis sits on the blackland prairie east of Waxahachie, and that clay soil shifts. It expands when wet and contracts through dry summers, which slowly works gate posts out of plumb. A gate that dragged slightly last spring may be fully stuck by August, not because the opener failed but because the ground moved underneath it. We account for that on every job in Ennis, checking post depth and footing condition before adjusting or replacing hardware. Skipping that step is how you get a gate that works for two weeks and sags again.
Wind matters too. Ennis gets open, unobstructed gusts across the flat stretches south of town, and a large ornamental gate acts like a sail. We regularly reinforce hinge welds and add heavy-duty post supports on wide drive gates to handle that constant lateral pressure. Older homes along streets near the historic downtown area also tend to have narrower driveways and custom-built gates sized before full-size pickups were the norm, which means a lot of the repair work we do in Ennis involves re-hanging and rebalancing rather than simple opener swaps.
Our Main Ennis Services
Most calls from Ennis come down to two things: a gate that won’t open or an opener that stopped responding. Each service below has its own Ennis page with local pricing and troubleshooting help.
Gate Repair in Ennis
A gate that drags, sags, or won’t latch is a safety issue as much as an annoyance, especially with kids or pets around. We handle broken hinges, bent tracks, cracked welds, rusted posts, and gates knocked out of alignment by vehicles or shifting clay soil. On an Ennis property with a heavy steel drive gate, the failure is often a hinge or post problem rather than the opener itself. Our technicians check the whole assembly, not just the part that failed. Gate Repair in Ennis covers what we fix and what it typically costs.
Electric Gate Repair in Ennis
When the motor runs but the gate barely moves, or it starts and stops mid-travel, the problem usually lives in the electrical side: a failing capacitor, a short in the underground cable run, or a control board that got fried during one of the storm fronts that roll through Ellis County. We diagnose those problems with a meter, not guesswork. We also repair safety edges, photo eyes, and keypad wiring to keep the gate operating safely. Electric Gate Repair in Ennis explains the service in detail with local price ranges.
Gate Opener Repair in Ennis
We repair openers from Viking, Ghost Controls, DoorKing, and Elite, plus other major brands. Common Ennis failures we see: stripped drive gears, burned-out transformer boards, lost limit settings after a power blink, and remote controls that simply stop pairing. If the opener is beyond reasonable repair, we’ll show you the failed part and quote a replacement before doing anything. No surprises. Gate Opener Repair in Ennis is where you’ll find symptom-by-symptom guidance and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Ennis
Our technicians work on Vikings, Ghost Controls, DoorKing, and Elite openers, along with five other major brands, covering nearly every gate opener an Ennis homeowner is likely to have. Common control boards and remotes for these brands are stocked on our service vehicles, so many repairs are handled in a single visit. See our brands for the full list.
Pricing for Gate Company in Ennis, TX
| Service | Typical range in Ennis |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair | $180 – $340 before parts |
| Hinge replacement | $120 – $280 |
| Track straightening | $150 – $300 |
| Weld repair | $100 – $250 |
| Safety sensor replacement | $120 – $220 |
| Remote programming | $60 – $120 |
| Post reinforcement | $200 – $450 |
Prices in Ennis run higher when a gate post needs digging out and resetting due to clay soil movement, or when an underground cable run has to be traced and spliced. Whatever the job, you get a written price before any work starts, and the number on the invoice matches the number you approved.
Neighborhoods We Serve in Ennis
We run calls across all of Ennis, including:
- Historic downtown district and surrounding older streets
- Lake Bardwell area
- Subdivisions off Ensign Road and Country Club Road
- Properties south toward Bardwell and Alma
- Rural acreage along Highway 34 and FM 1183
Most Ennis jobs can be scheduled same-day or next-day, and every technician arrives with a live, trackable arrival time so you’re not waiting through a four-hour window.
Service Area – Cities Near Ennis
Along with Ennis, our crews cover the surrounding Ellis County and southern Dallas County communities. You’ll find the same written-price guarantee and 365-Day Done Right Promise in Waxahachie, TX, Red Oak, TX, Wilmer, TX, and Lancaster, TX. Scheduling for all of these is coordinated from our Dallas-Fort Worth area office, and local crews serve Ennis directly.
Serving Ennis, TX - Our Local Coverage Area
We’re based in the Ennis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Ennis
Most Ennis service calls are scheduled same-day or next-day. Emergency calls, like a gate stuck open at night, are prioritized, and a live person answers the phone 24/7 to get a technician moving toward you quickly.
Repairing or replacing hardware on an existing gate typically doesn’t require a city permit in Ennis. If you’re planning a brand-new gate installation or major driveway changes, we recommend a quick check with the city building office first. On the repair side, you won’t need paperwork for the work we do.
Yes. Every repair comes with the 365-Day Done Right Promise in writing: if the repair fails within 365 days, we return at no charge to make it right. You also get a written price before work begins, so there’s never an invoice bigger than the quote you approved.
If your gate is stuck, sagging, or making a noise it never made before, call (903) 417-0793. Calder Gate Repair serves all of Ennis with a live person on the line, a written price before work starts, and a real guarantee behind every repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ennis Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.