Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Opener Repair Across Commerce
When a gate opener in Commerce stops working, it’s rarely just the motor. Most calls we run here trace back to the same thing: the gate itself has shifted on older footings, and the opener is reading that drag as an obstruction. So it reverses, stops short, or refuses to close. We fix both halves of that problem, because fixing only the opener means you’ll call again in three months. If your gate is acting up anywhere in Commerce, from Bandini to Slauson, call (903) 417-0793 and we’ll have a technician out.
Why Calder Gate Repair Is Commerce’s Preferred Gate Opener Repair Company
Calder Gate Repair is a gate repair specialist inside the Relay Home Co. family, founded in 2009. That matters in Commerce because our technicians work on the exact housing stock and lot layouts you live with every day: 1950s tract homes, converted industrial parcels, and gates that sit tight to the property line. We’ve repaired openers along Eastern Avenue, around the Commerce Casino block, and throughout the residential streets off Telegraph Road. Every job gets our 365-Day Done Right Promise in writing. If the repair fails within a year, we come back at no charge. You’ll also get one live technician on the phone, a trackable arrival time, and a written price before any work starts. No four-hour windows, no surprise invoice.
Gate Intercom in Commerce
Gate Intercom work in Commerce usually means one of two things: replacing an old crackly audio unit on a 1950s-era driveway gate, or adding a video keypad intercom to a gate that currently only opens with a remote. Both are jobs we handle on existing operators from Linear, DoorKing, and LiftMaster. A wired audio intercom replacement in Commerce typically runs $280 – $460. A video intercom with a keypad, including wiring back to the house, usually lands between $650 and $1,100 depending on how far the wire has to run and whether we’re trenching under a driveway apron.
Audio intercom replacement
If you can hear visitors but they can barely hear you, or the buzzer stopped triggering the gate release, you’re looking at a failing intercom board or a dead speaker. We replace the unit, retest the gate release circuit, and usually finish within two hours.
Video keypad intercom upgrades
Adding a camera and code entry on an older gate gives you package visibility and lets delivery drivers get in without a remote. We run the low-voltage wire, mount the panel at Commerce driveway height, and program owner codes on site.
Gate Opener With Keypad in Commerce
A Gate Opener With Keypad installation in Commerce is common on the small industrial lots off Washington Boulevard and the residential streets where Amazon deliveries happen daily. The keypad lets anyone with the code open the gate without a remote, which matters when you’re not home and a delivery shows up. A new keypad integrated with your existing opener typically runs $210 – $390. A full opener replacement with a wireless keypad, safety photocells, and new remotes starts around $900 and goes up to $1,600 depending on the operator brand and gate weight.
Adding a keypad to an existing operator
Most operators installed in the last decade accept a compatible wireless or wired keypad. We match the keypad to your brand, program up to four entry codes, and show you how to change them yourself.
Replacing the opener and keypad together
If the operator is past saving, we spec a new one sized for the actual gate weight and travel. That matters on Commerce lots where a slide gate runs along a tight property line and the operator gets worked harder than the manufacturer intended.
Trusted Brands We Service in Commerce
We’re factory-familiar with nine major opener brands, and in Commerce we see a heavy concentration of Linear, DoorKing, and Viking units on the older residential and light-industrial gates. We keep common replacement parts for those brands stocked on our trucks: control boards, limit switches, remote receivers, and safety photocells. That means most repairs here don’t require a second trip or a week waiting on a part. If you’ve got a Ghost Controls opener on a newer gate, we handle those too, including the smartphone adapter setups.
Common Gate Opener Repair Problems We See in Commerce Homes
- Gate reverses mid-cycle on a slide gate. Commerce’s older shallow footings let the gate settle, the rack drops out of line, and the opener’s torque sensing reads the drag as a block. The gate opens halfway, thinks it hit a car, and reverses.
- Swing gate binding on the hinge post. We see this on gates installed decades ago along 1950s lot lines. The post shifts, the gate sags, and the opener struggles. Fixing this usually means post work, not a new motor.
- Safety photocells tripping for no reason. Sun glare, dust, and years of driveway traffic knock the sensors out of alignment. The gate won’t close, or it closes then immediately reopens. We realign and replace the cells when they’re actually dead.
- Loop detector shooting phantom signals. Older buried loop detectors at Commerce driveway aprons eventually short out. The gate opens on its own or won’t stay closed. We test the loop, replace the detector board when needed, and retest the close cycle.
Pricing for Gate Opener Repair in Commerce, CA
Most opener repairs in Commerce fall between $180 and $340 before parts. A limit switch replacement runs $120 – $210. A new control board on a Linear or DoorKing unit lands $260 – $480. Safety photocell replacement is $140 – $260. Post resetting or sag correction, which is often the real fix on this city’s older gates, runs $400 – $900 depending on concrete work. Every price is written and agreed to before we touch the gate. You’ll know the number at the door, and the invoice will match it. Call (903) 417-0793 for a free estimate.
Scheduling and dispatch for Commerce are coordinated from our Los Angeles office, and crews work locally throughout the city.
We Also Serve Cities Near Commerce
While this page is built around gate opener repair here in Commerce, our technicians also cover Gate Opener Repair calls in Los Angeles, San Diego, San Jose, and San Francisco. Same written pricing, same 365-day written guarantee, same live person on the phone.
Serving Commerce, CA - Our Local Coverage Area
We’re based in the Commerce area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Commerce
Your gate opens but won’t close because the safety sensors or loop detector are telling the opener there’s something in the way, and on Commerce’s older lots that something is usually the gate itself dragging on a settled post or a worn rack. The opener reads that bind as an obstruction and refuses to close. We test the photocells, check the loop, and inspect the gate’s travel path before swapping any parts. Call (903) 417-0793 and we’ll diagnose it on site.
Yes, we install keypads and intercoms on existing operators from Linear, DoorKing, Viking, LiftMaster, and most other brands installed in the last 15 years. The job includes programming, testing with your remotes, and a quick walkthrough of the codes and settings. We’ll quote you a written price before starting.
It’s both, and in Commerce it’s usually the gate first. Older pour-in-place footings on 1950s lots settle, the gate drops, and the opener’s torque sensing starts fighting the drag. Many companies will sell you a new opener and ignore the footing. We fix the post and rack first, then assess whether the opener actually needs replacement. It’s how we keep our 365-Day Done Right Promise honest.
For repair work, yes. We run same-day service across Commerce and most of the time the fix is a control board, limit switch, or sensor that we have on the truck. For full installations and new gate work, we don’t promise same-day: that work is measured, ordered, and scheduled. We’ll give you a written price and a real installation date. Call (903) 417-0793 and we’ll tell you which track you’re on.
A proper opener installation includes a base pad or mounting plate sized for the operator, the power run from your panel to the gate, safety photocells aligned and tested, force and travel limits set so the gate stops and reverses correctly, and a final reversal test with a stopwatch. In Commerce, it often also includes post resetting or a new footing, because you can’t hang a new operator on a gate that drags. That’s the difference between an installation that lasts and one you’re repairing in a year.
If your gate opener is acting up in Commerce, call (903) 417-0793. A live person answers, the estimate is free, and the price is in writing before any work begins.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Commerce as part of the Relay Home Co. family since 2009.