Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Opener Repair Across Fort Lauderdale
A dead gate opener in Fort Lauderdale usually comes down to one of three things: corrosion in the control board, a failed safety sensor, or a physical alignment problem from shifting soil. Most repairs run $185 – $380 before parts, and Calder Gate Repair gets a uniformed technician to your property with a live, trackable arrival time – not a four-hour window. If your gate won’t open, won’t close, or reverses mid-cycle, call (903) 417-0793. We work on FAAC, BFT, Linear, Viking, LiftMaster, and most other opener brands found in Fort Lauderdale driveways.
Why Calder Gate Repair Is Fort Lauderdale’s Preferred Gate Opener Repair Company
Fort Lauderdale homeowners call us because we put the price in writing before a single bolt gets turned. That’s not a sales pitch – it’s the Relay Standard, and it means the number on your invoice is the same number you approved at the door. Our Gate Opener Repair team works on nine major opener brands, and we carry marine-grade replacement photo-eyes and corrosion-resistant terminals on every truck because this coastal market demands them.
Every repair we complete in Fort Lauderdale carries the 365-Day Done Right Promise. If the repair fails within 365 days, Calder returns at no charge. Full stop. A live person answers our phones 24 hours a day, 7 days a week – no voicemail tree, no chatbot, no “press 2 for service.” You get a real human who can book the visit, check technician arrival time, or troubleshoot on the spot. Nico Alvarez leads our team, and every technician arrives background-checked and in uniform. Our dispatch and scheduling for Fort Lauderdale is coordinated from our Miami (South FL) office, with crews serving the city locally.
Gate Opener With Keypad in Fort Lauderdale
Gate Opener With Keypad service in Fort Lauderdale covers the full keypad-to-operator system: the keypad module at the driveway, the wiring run back to the control board, and the board’s receiver logic that reads the entry code. When a keypad stops working here, it’s frequently the keypad’s own membrane or contacts corroded from salt air, or the underground wire between the keypad and operator is shorting after storm water infiltration. We diagnose the whole path, not just the keypad.
Keypad Diagnostics and Replacement
The first thing we check is whether the keypad itself is transmitting. Many Fort Lauderdale keypads fail because the internal membrane swells in humidity or the backplate seal degrades. If the keypad is dead, replacement is quicker and often cheaper than chasing an intermittent fault. We stock wired and wireless keypad units locally.
Board Receiver and Wiring Repair
If the keypad is fine, the fault usually lives at the operator board or the wire run. We trace the circuit, re-terminate corroded connections, and dielectric-grease the terminals. Expect $165 – $320 for a keypad or board-level repair, depending on what failed and whether parts are needed.
Gate Operator in Fort Lauderdale
Gate Operator repair in Fort Lauderdale means fixing the motor, the arm, the control board, and the safety sensors that run your gate – whether it slides, swings, or lifts. We don’t just swap parts. We bench-test the operator, check the board for corrosion, test the force settings, and run the UL 325 entrapment reversal procedure. That’s the test that confirms the gate stops and reverses when it hits an obstruction.
Operator Board and Motor Repair
Salt air inside the operator housing is the leading killer of gate boards in Fort Lauderdale. Board terminals oxidize, the gate gets erratic, and eventually the opener stops responding entirely. We clean and re-terminate, or replace the board if the corrosion has gone too deep. Board repairs on a FAAC or BFT operator typically run $210 – $410 with parts.
Safety Edge and Photocell Replacement
Storm-driven rain coats the photocell lenses fast. When they’re fogged with salt film, the opener reads a false obstruction or, worse, fails to reverse on a real one. We test photo-eyes on every visit, not just when the gate misbehaves. Safety edge replacement is part of getting the opener back to code-compliant operation.
Trusted Brands We Service in Fort Lauderdale
Our technicians are factory-familiar with FAAC, BFT, Linear, and Viking, among others. We don’t just carry universal parts that “might fit” – we order the right board, arm, or sensor for your specific model and keep local stock availability in Miami for fast Fort Lauderdale turnaround. Whether you own a FAAC 400 swing operator, a BFT sliding opener, or a Linear unit, our team has the wiring diagrams, the diagnostic experience, and the replacement parts to get it done right.
Common Gate Opener Repair Problems We See in Fort Lauderdale Homes
- Salt-air corrosion in the control box: Board terminals turn green, connections short, and the gate opens or closes unpredictably. We clean terminals, apply dielectric grease, and replace boards that are past saving.
- Storm water and irrigation pooling at the hinge post: The post rusts, shifts, and the swing gate drops out of alignment. The operator then strains mid-travel and eventually burns out. We re-set posts and realign the operator, not just the gate.
- Lightning-adjacent surges from summer squalls: Loop detectors and keypad entry boards fry in these events. The gate goes unresponsive to remotes or stuck open. We replace the detector or keypad board and add surge suppression where feasible.
- Failed photo-eye sensors on older gates: Fogged lenses from salt spray cause false obstruction readings or missed reversals. We clean or replace and re-test the UL 325 reversal before we leave.
Pricing for Gate Opener Repair in Fort Lauderdale, FL
Most gate opener repairs in Fort Lauderdale run between $185 and $380 before parts. Photo-eye replacement sits at the low end, around $120 – $220. Board replacement on a FAAC or BFT operator runs $210 – $410. Full operator replacement, where the old one is too far gone, typically lands between $950 and $2,600 installed, depending on gate length, operator capacity, and whether you want a keypad added. Every job gets a written price before work starts. Call (903) 417-0793 for a free estimate – you’ll know the cost before anything happens.
We Also Serve Cities Near Fort Lauderdale
Our Fort Lauderdale crews regularly work in Plantation, Pompano Beach, Hollywood, and Coconut Creek. If you’re in a Fort Lauderdale neighborhood or just outside the city, call us – we’ll give you the same written pricing and trackable arrival time.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Fort Lauderdale
Salt film from coastal spray coats the safety photocell lenses, so the sensor stops reading correctly and the opener fails to reverse when it should. We clean or replace the lenses, test the reversal on a 2×4 block, and dielectric-grease the board terminals. It’s the most common storm-related failure we see in Fort Lauderdale. Call (903) 417-0793 to get it checked before the next squall.
Expect $185 – $380 for most repairs before parts. Board replacement on a FAAC, BFT, or Linear opener runs $210 – $410. Photo-eye issues run $120 – $220. Every quote is written before work begins, so there are no surprises. Call (903) 417-0793 for a free estimate.
No – a new opener installation involves groundworks, posts, power runs, safety edges, and reversal testing. We diagnose, then schedule the installation with a measured, written price. The 365-Day Done Right Promise covers the installation too.
Usually the gate itself: a wheel off the track, a warped rail, debris in the track, or the post has shifted. We check the gate’s mechanical alignment first, because forcing a new operator onto a bad gate just burns out another motor. Call (903) 417-0793 and we’ll diagnose it properly.
Yes. Our technicians are trained on nine major brands, including LiftMaster, FAAC, BFT, DoorKing, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. We carry or can quickly source the right parts for your model from our Miami office.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Fort Lauderdale and surrounding South Florida communities.