Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Opener Repair Across Lake Worth
When your gate opener quits in Lake Worth, you need a tech who knows the difference between a dead motor and a bent rack on a short pre-war driveway. We do. Calder Gate Repair fixes gate openers across Lake Worth every week, from the Historic Old Town core to the newer builds west of 820. Most repairs run $180 – $450 before parts, and a real person answers when you call (903) 417-0793. Written price first, no surprises at the door.
Our techs arrive in uniform with a live, trackable arrival time. You’ll know who’s coming, when they’ll pull up, and exactly what the job costs before a single bolt turns. That’s The Relay Standard, and it’s how we work on every Lake Worth call.
Why Calder Gate Repair Is Lake Worth’s Preferred Gate Opener Repair Company
Lake Worth homeowners keep our number because we show up when we say we will and we fix the actual problem, not just the symptom. The gates around here are different than what you find in newer suburbs. Many sit on short, narrow driveways where clearances are tight and older concrete has shifted. A tech who only knows cookie-cutter installs will misdiagnose a bent rack as a bad motor. We don’t.
Calder Gate Repair is part of the Relay Home Co. family, established in 2009. Every location is independently owned and operated under The Relay Visibility Guarantee, and every Lake Worth job carries our 365-Day Done Right Promise: if the repair fails within 365 days, we return at no charge. Written. Not a vague promise. It’s on every invoice.
We’re background-checked, uniformed, and factory-familiar with nine major opener brands. Calls are answered by a live person 24/7, not a voicemail. When your gate won’t open at 6 a.m. and your truck is stuck in the driveway, that matters.
Gate Intercom in Lake Worth
Gate intercom repair in Lake Worth often comes down to one thing: the wiring between the house and the gate has gone bad, or the loop detector under the driveway was never re-tuned after a pour or resurfacing. We see it constantly on older lots near Marine Creek and along Azle Avenue, where driveways were cut decades ago and the conduit has cracked. A typical intercom repair runs $140 – $320, depending on whether we’re replacing a handset, re-terminating wiring, or swapping a failed power supply.
Intercom Wiring and Loop Detector Diagnostics
When a Lake Worth homeowner presses the intercom button and nothing happens at the gate, the fault is rarely the intercom itself. It’s usually a broken wire run, a corroded splice, or a loop detector that stopped reading the weight of a vehicle. We trace the circuit, not guess at it.
Upgrading to a Two-Way Video Intercom
Some Lake Worth clients want more than a crackling voice line. We can add video intercom capability to an existing opener so you see who’s at the gate from your phone. Written quote first, like always.
Gate Opener With Keypad in Lake Worth
Gate opener with keypad work in Lake Worth usually starts with the buyer’s question: “Can I keep my old opener and just add a keypad?” Often yes, if the control board has an open input and the opener is from a brand we service, like LiftMaster, FAAC, or Viking. A wired keypad install typically runs $120 – $220. A wireless keypad upgrade, which gives you code management and temporary codes for guests or contractors, runs $160 – $280 parts and labor.
Keypad Programming and Code Management
We set up primary codes, temporary codes for pool crews or house sitters, and walk you through how to change them yourself from the keypad. No call-back needed just to add a code.
Why Keypads Beat Buried Loop Detectors
On short Lake Worth driveways where the gate must stop and reverse within inches, a keypad gives you deliberate control that a loop detector can’t. Loop detectors false-trigger when concrete shifts or water pools after heavy rain. A keypad doesn’t care about weather.
Trusted Brands We Service in Lake Worth
We stock common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so many Lake Worth repairs happen same-day from the van. If your Viking swing arm is stripped or your DoorKing control board is fried, we likely have the part on the truck. For older FAAC hydraulic operators, we can usually source replacement boards and pumps within one or two business days. We’ll tell you honestly if your opener is worth fixing or if a new unit makes more sense.
Common Gate Opener Repair Problems We See in Lake Worth Homes
- Slide gates stalling mid-travel: On short, uneven concrete driveways around the Historic Old Town area, the rack and pinion drift out of mesh when the slab shifts. The gate starts, then stops or reverses. The motor is usually fine; the rack needs truing and the operator needs re-anchoring.
- Swing gates burning out boards: A sagging gate panel overloads the opener and fries the control board. We see this on lots where hinge posts lean from years of North Texas clay expanding and contracting. You can swap boards forever, but until the post is re-set or the panel re-hung, the board will keep failing.
- False opens and no-close faults after rain: Loop detectors that were never re-tuned after a driveway pour or resurfacing go haywire when water sits under the concrete. The gate opens on its own or refuses to close. We retune them or replace them entirely.
- Keypad and intercom calls that don’t reach the gate: Cracked conduit and corroded splices along Azle Avenue and the older streets east of the tracks are the usual culprits. We trace the wire run and replace what’s bad, rather than selling a whole new system.
Pricing for Gate Opener Repair in Lake Worth, TX
Gate opener repair in Lake Worth typically costs $180 – $450 before parts. A limit switch replacement, which is the small sensor that tells the gate when to stop, usually lands around $140 – $200. A control board swap runs $280 – $500 depending on brand. Full operator replacement, including removing the old unit and mounting the new one, runs $900 – $2,400 installed. Parts are quoted separately and in writing before we start. You approve every number first. Call (903) 417-0793 for a free estimate, and we’ll give you a real range over the phone, not a vague “it depends.”
What changes the price: whether the operator is slide or swing, how far the gate is from power, whether the rack or hinge posts need additional work, and whether we’re repairing or replacing. None of that is a mystery. We walk you through it line by line.
We Also Serve Cities Near Lake Worth
Beyond Lake Worth, our Gate Opener Repair team covers the wider metro, including Fort Worth, Dallas, Houston, and San Antonio. If you’re just outside Lake Worth, call us and we’ll confirm coverage and a real arrival time. We also handle full gate opener installs and Lake Worth service calls from the same Dallas-Fort Worth dispatch center.
Serving Lake Worth, TX - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Lake Worth
Most of the time, no. On short, uneven driveways around the Historic Old Town area, the rack and pinion drift out of mesh when concrete shifts, so the gate stalls mid-travel. The motor is usually fine. We true the rack, re-anchor the operator, and test the full travel. That repair typically runs $160 – $280 in Lake Worth. Call (903) 417-0793 and we’ll diagnose it over the phone before we even send a truck.
Both brands are repairable, and we stock common LiftMaster and FAAC parts on the van. The question is whether the gate itself, usually the hinge posts or the rack, is what’s killing the opener. If the panel hangs square and the posts are solid, a repair makes sense. If the post is leaning or the rack is bent in three places, a new operator on a bad foundation won’t last. We’ll show you the measurements and let you decide with a written quote for either path.
Rain in Lake Worth gets under older driveway slabs and floods a loop detector that was never re-tuned after the concrete was poured or resurfaced. The detector reads the water as a vehicle and triggers the opener. Re-tuning or replacing the detector is usually a $140 – $220 fix. We also check that the safety photocell lenses aren’t clouded or misaligned after storms.
Often yes, because a keypad doesn’t rely on the buried loop detector that’s causing the false triggers. We can wire a keypad directly to the opener’s control board and disable the faulty loop input, so the gate only opens when someone enters a code or presses the intercom button. A wired keypad install in Lake Worth runs $120 – $220. If you want video intercom too, we’ll quote that as a separate line item.
A full gate opener installation, including the operator, arm or rack, safety edges, and reversal testing, takes four to eight hours on site. We don’t promise same-day installation because proper footings and wiring take the time they take, and we don’t cut corners on safety. What we do promise: a free measure, a written quote with a real price, and a scheduled install date. Repair calls, by contrast, are often same-day. Call (903) 417-0793 to get on the schedule.
Most Lake Worth lots in the older core, around the Historic Old Town area and along avenues east of the tracks, were platted long before automatic gates existed. That means short, narrow driveways where the gate must stop and reverse within inches, not the long rural setbacks you see west of town. A slide gate on one of these lots has no room for slop. If the rack is out of mesh by a quarter inch or the limit switch is off by two degrees, the gate stalls or slams. Our techs know these constraints because we work them every week. One homeowner near Old Town had a LiftMaster slide operator stalling halfway through travel. Our tech found a bent rack and a failing loop detector, not a dead motor. We trued the rack, re-anchored the operator on its post footing, replaced the detector, and re-tested the safety photocell. The gate has cycled cleanly since. On a separate call, we converted a swing gate to a Ghost Controls solar opener where trenching power to the street was not realistic. That’s how you fix a short driveway, not by shimming the problem.
If your gate opener in Lake Worth is acting up, call (903) 417-0793. A live person answers, we’ll give you a real price range over the phone, and we’ll schedule a technician with a trackable arrival time. Written quote before any work starts. Every time.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Lake Worth and the Dallas-Fort Worth metro with gate opener repair that’s priced honestly and guaranteed in writing.