Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Opener Repair Across Sunrise
If your gate opener in Sunrise won’t open, reverses mid-travel, or just hums without moving, you want it fixed before the next storm rolls through. Most gate opener repairs in Sunrise run $145 – $385 before parts, and our techs typically reach homes near Sawgrass Mills, Welleby, and Springtree within 60 – 90 minutes of your call. We’re Calder Gate Repair, part of the Relay Home Co. family founded in 2009, and we handle everything from blown control boards to misaligned safety sensors. Call (903) 417-0793 and a live person answers, 24/7.
Why Calder Gate Repair Is Sunrise’s Preferred Gate Opener Repair Company
Sunrise homeowners call us because we show up when we say we will. Every tech is background-checked, uniformed, and dispatched with a live arrival time you can track from your phone – not a four-hour window. We know this city’s gates better than most, because we service them across Sawgrass, Sunrise Lakes, West Parkside, and the gated communities along Nob Hill Road and NW 136th Avenue.
Nico Alvarez, who leads Calder Gate Repair, built our reputation on one simple rule: the price we quote at the door is the price you pay. No add-ons, no pressure. Every repair includes our 365-Day Done Right Promise in writing. If the fix doesn’t hold within a year, we return free of charge. That’s not marketing language; it’s on every invoice.
We’re also factory-familiar with the brands Sunrise homes actually use: LiftMaster, FAAC, BFT, Linear, Viking, and more. When a FAAC control board fries from a lightning surge near the Everglades, we don’t guess. We diagnose, quote, and repair.
Gate Servicing in Sunrise
Gate Servicing in Sunrise is the maintenance work that keeps an opener from failing in the first place. A full service here runs $135 – $220 for most residential gates and takes about 60 – 90 minutes. It includes cleaning and lubricating the drive mechanism, checking limit switches (the small sensors that tell the gate when to stop), testing safety reversal, and inspecting hinges, wheels, and post footings.
In Sunrise specifically, we recommend service twice a year. Sandy soil shifts after wet season, and Everglades-edge storms push debris into slide gate tracks. A gate that runs fine in January can bind by August. Regular service catches that before the operator burns out a gear or trips a breaker.
Post Footing and Alignment Checks
Most swing gates in Sunrise sit on sandy soil that drains fast but settles unevenly. During a service we check post plumb and gate sag, then adjust hinge points so the operator isn’t fighting the gate’s weight. This is a Sunrise-specific failure point we see in Sawgrass and Sunrise Lakes regularly.
Operator Tune-Up and Electrical Inspection
We inspect wiring connections, test capacitor health, and verify amperage draw on the motor. A spike in draw is usually the first sign a board or motor is on its way out. Catching it early on a FAAC or BFT unit is far cheaper than a full replacement later.
Gate Intercom in Sunrise
Gate Intercom in Sunrise covers the call box, keypad, and phone-based entry systems that let visitors ring your home from the driveway. Repair costs here typically run $95 – $250 depending on whether we’re replacing a keypad, rewiring a speaker unit, or swapping a control module. Most intercom jobs are completed in a single visit.
Sunrise has a lot of older gated communities with aging intercom hardware. We regularly repair Doorking and Viking intercoms where corrosion from humidity has degraded contacts. Newer systems with app-based entry are quicker to diagnose but still need on-site wiring checks. If your intercom buzzes, drops calls, or won’t release the gate, we can usually trace it to a failing relay or a loose ground.
Keypad and Call Box Replacement
A dead keypad is often just failing membrane buttons from years of direct sun and rain exposure. We stock common replacement keypads for Linear and Viking systems, so many Sunrise customers get same-day fixes.
Phone and App-Based Entry Repair
When a visitor calls your intercom and gets no response, the issue is usually the phone bridge or a corroded speaker wire. We test signal strength, replace degraded wiring at the gate, and sync the system back to your home phone or smartphone app.
Trusted Brands We Service in Sunrise
Calder Gate Repair trains on nine major gate opener brands, and for Sunrise specifically we keep common replacement parts in local stock for LiftMaster, FAAC, BFT, and Linear. That means fewer return trips waiting on a shipped component. FAAC units are common in Sunrise’s newer gated communities; LiftMaster and BFT show up often in residential swing gate installs. Viking intercom hardware appears across older neighborhoods. If you tell us the brand and what the gate does when you press the button, we can usually quote the repair over the phone.
Common Gate Opener Repair Problems We See in Sunrise Homes
- Lightning surge damage: Sunrise’s western edge sits against the Everglades, and summer storms roll in fast. We replace more blown control boards on FAAC and LiftMaster operators here than anywhere else in Broward. A whole-home surge protector at the gate’s power source helps a lot.
- Sandy soil post settlement: After the wet season, swing gate posts move. That throws off alignment and causes false safety reversals. We often add post footing reinforcement when we reset these gates so the fix lasts more than a season.
- Slide gate track debris: Storm runoff carries leaves, mulch, and grit into rack and pinion tracks. The operator jams or strips a gear. Cleaning the track and replacing the gear rack is a standard repair we do in Sunrise throughout summer.
- Photocell misalignment: Landscaping crews and storm debris knock safety photocells out of alignment. The gate then reverses mid-travel or refuses to close. This is often a quick fix, but it needs a tech with a voltmeter to verify alignment and beam strength.
Pricing for Gate Opener Repair in Sunrise, FL
A typical gate opener repair in Sunrise runs $145 – $385 before parts. Simple fixes, like realigning a photocell or resetting a tripped breaker, land at the low end. Replacing a control board on a LiftMaster or FAAC unit usually falls between $285 and $520 with parts. Swing gate post resetting starts around $250 and goes up if concrete footing work is needed. Every job gets a written price before any work starts. That’s not optional; it’s how we’ve operated since 2009. Call (903) 417-0793 for a free estimate, and you’ll know exactly what you’re paying before we turn a single bolt.
We Also Serve Cities Near Sunrise
Our Gate Opener Repair team covers Sunrise and nearby communities, from Jacksonville up north to Miami, Tampa, and Orlando. If you’re in one of those areas and need gate work, the same Calder standards apply: written pricing, background-checked techs, and the 365-Day Done Right Promise. See our Sunrise page for local service details across the city.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Sunrise
In Sunrise, the two most common causes are misaligned safety photocells and loose post footings from sandy soil settlement. Storm debris and landscaping crews knock the photocells out of alignment, which tells the opener something is in the path. Shifting posts change the gate’s geometry and cause false reversals too. One customer in Sawgrass had a LiftMaster swing gate that kept reversing mid-travel; we found a misaligned photocell and a loose hinge post from the soil shifting after heavy rains. We reset the footing, realigned the sensor, and tested the full open-close cycle. Call (903) 417-0793 if your gate won’t stay closed.
Yes. For repair and emergency calls in Sunrise, we dispatch same-day with live arrival tracking. Most homes near Sawgrass Mills, Welleby, and Sunrise Lakes get a tech on-site within 60 – 90 minutes. Emergency service for a stuck-open gate runs the same as normal repair pricing because we don’t charge extra for urgency.
Twice a year. Sunrise’s sandy soil and Everglades-edge storms cause more post movement and track debris than coastal Broward. A spring and late-summer service catches alignment drift, corrosion, and motor strain before they become breakdowns. Regular servicing is $135 – $220 for most residential gates.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. FAAC and LiftMaster are the most common in Sunrise’s gated communities. We carry local parts stock for those brands specifically to keep turnaround fast.
It can work, but only if the panel gets direct sun most of the day and the battery is sized for frequent use. Sunrise homes shaded by mature oaks or with heavy gate traffic often struggle with solar units, especially after cloudy summer afternoons. We can assess your site and quote both solar and line-powered options, so you make a decision based on your actual usage, not a brochure.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family.
If your gate opener is acting up in Sunrise, don’t wait for it to fail entirely. Call (903) 417-0793 now. You’ll get a live person, a straight answer, and a written price before any work begins.