Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Crowley
Gate repair in Crowley, TX usually costs between $145 and $480 for common operator and hinge fixes, and most repairs are completed in a single visit. If your gate won’t open, sags on its hinges, or the opener runs but nothing moves, you’re dealing with one of the two repair profiles we see constantly in Crowley: older wrought-iron swing gates with footing problems, or newer HOA-style gates where the operator or safety system fails first. Calder Gate Repair serves all of Crowley with background-checked, uniformed technicians, a written price before any work starts, and the 365-Day Done Right Promise on every job. Call (903) 417-0793 and a live person answers, 24/7.
Why Calder Gate Repair Is Crowley’s Preferred Gate Repair Company
Crowley sits in a sweet spot of North Texas that we know well. The city’s older half-acre properties off FM 1187 and the newer HOA subdivisions around Deer Creek present very different gates, which means very different repairs. A technician who only sees one type will misdiagnose the other. Our crews carry parts for both aging wrought-iron swing gates and newer vinyl and metal HOA gates, so we arrive prepared for either diagnostic path.
Every Crowley job gets The Relay Standard: a live, trackable arrival time (not a four-hour window), before-and-after photos, and a digital invoice you pay from a link. The price is written and agreed before a single bolt is turned. If the repair fails within 365 days, Calder returns at no charge under the 365-Day Done Right Promise. That’s the guarantee Nico Alvarez built into every Calder job, and it’s stated in writing, not implied.
Crowley homeowners also get a real person on the phone. No chatbots, no voicemail at midnight. Call (903) 417-0793 at 2 a.m. and a live dispatcher answers. For a city spread between rural open lots and tight HOA blocks, that reliability matters more than most people realize until a gate fails on a Friday night.
Wrought Iron Gate Repair in Crowley
Wrought iron gate repair in Crowley starts around $180 and typically runs $220 to $380 depending on whether the hinge post needs resetting or just the panel adjusted. This is the single most common repair call we get from older Crowley properties west and north of the old downtown. The reason is simple: expansive clay soil. When it gets wet, it swells. When it dries, it contracts. Over a few seasons, a heavy wrought-iron gate moves enough to shift its hinge post in the footing. The gate sags, the latch misses, and the opener strains until something fails.
Here’s what that means for you. If your gate sags but the panel isn’t bent, the fix is usually a post reset, not a panel replacement. We dig out the footing, re-set the post in fresh concrete, and realign the hinges. Trying to adjust the panel alone on a shifted post gives you a few weeks before it sags again.
Hinge and Post Resets
Most wrought-iron gate sag in Crowley traces back to a post that’s moved, not a panel that’s bent. We reset the post properly rather than shimming the hinge. Expect $180 to $320 for a standard single-post reset, including setting time and hardware.
Weld and Rust Repair
North Texas humidity and Crowley’s clay-heavy ground moisture accelerate rust at the bottom rail and hinge weld points. We grind back, re-weld, and seal the affected area. Small weld repairs run $120 to $200. A full lower-rail rebuild with rust treatment is usually $300 to $450.
Metal Gate Repair in Crowley
Metal gate repair in Crowley – meaning steel-frame and aluminum gates, often on newer HOA properties – typically runs $150 to $400, with most jobs landing around $200 to $300. These gates are lighter than wrought iron, so post movement is less common. What fails instead is alignment, the operator, or the safety system.
On newer subdivisions east of FM 731 and around the high school, we see a lot of gates where the rack and pinion is out of alignment or the loop detector has been damaged by vehicles. The motor runs but the gate won’t cycle reliably. That’s an operator repair, not a hinge repair, and it needs a technician who can test the full system, not just eyeball the gate panel.
Rack and Pinion Alignment
Slide gates with a rack and pinion drive need the rack mounted straight and the motor gear meshed correctly. One hard vehicle bump or a season of ground movement knocks it out. Realignment runs $160 to $280 and usually resolves the “motor runs but gate barely moves” complaint.
Safety Sensor and Edge Repair
Automatic gates in Crowley must meet UL 325 entrapment protection standards. After a storm or landscaper’s mower clip, a photocell or edge sensor goes dark and the gate either won’t move or won’t reverse. Sensor replacement and testing runs $140 to $240, and we test reversal force before we leave.
Trusted Brands We Service in Crowley
Calder Gate Repair trains on nine leading opener brands, including Linear, Viking, Ghost Controls, and DoorKing. That covers virtually every operator installed in Crowley HOAs and rural properties. We keep common control boards, photo eyes, and remotes stocked locally for fast turnaround on Crowley calls, and for older or less common models, we order direct from the manufacturer’s regional distributor, usually a one-to-two-day turnaround. If your gate opener is a DoorKing or a Linear slide operator, we likely have the board on the truck.
Common Gate Repair Problems We See in Crowley Homes
- Sagging swing gates from shifted hinge posts. Crowley’s expansive clay soils swell and contract seasonally, moving hinge posts over time. The panel looks fine, but the post beneath it is no longer plumb.
- Operator failures on HOA gates. Newer subdivisions off FM 1187 have slide gates with rack and pinion drives. Vehicle bumps and ground shift knock the alignment out, and the motor runs without moving the gate.
- Safety sensor faults after storms. Photocells and edge sensors fail after heavy rain, lightning, or landscaping work. The gate stops responding or refuses to close, and the UL 325 entrapment protection is compromised.
- Solar opener battery drain on rural properties. Rural Crowley lots without grid power near the gate depend on solar-charged batteries. A weak battery stops the gate mid-cycle, and keypad codes fail after power surges.
Pricing for Gate Repair in Crowley, TX
Most gate repairs in Crowley fall between $145 and $480 before parts, depending on what failed. A simple hinge adjustment or sensor alignment runs $145 to $220. A hinge post reset with new concrete runs $180 to $320. Operator board replacement runs $220 to $450 plus the board, and a full rack and pinion realignment runs $160 to $280. New gate installations are measured, quoted, and scheduled – never rushed in a day. For any job, we give you a written price before work starts and that’s the number on your invoice. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Crowley
Calder Gate Repair covers Crowley and the surrounding area, including Burleson, Joshua, Kennedale, and Arlington. If you’re searching for Gate Repair across the southern Tarrant and northern Johnson county line, you’ll get the same written pricing and 365-Day Done Right Promise everywhere we roll. Learn more about our Gate Repair in Crowley service area.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Crowley
If your gate sags toward the latch side but the panel itself isn’t bent or cracked, the hinge post has likely shifted in its footing, which means a panel adjustment alone won’t hold. In Crowley’s expansive clay soil, post movement is the root cause of most wrought-iron gate sag, and the fix is a post reset at $180 to $320. Call (903) 417-0793 and we’ll inspect the footing before recommending anything.
Yes. Automatic gates must reverse when they contact an obstruction or when the photocell beam is broken, per UL 325 entrapment protection standards. If yours stopped reversing, the entrapment sensor or edge is likely dead, and the gate becomes a real safety hazard. We diagnose and replace failed photo eyes and edge sensors for $140 to $240. Call (903) 417-0793 – this one shouldn’t wait.
On slide gates, a motor that runs but doesn’t move the gate almost always points to a rack and pinion misalignment, where the motor gear isn’t meshing with the rack, or a damaged chain or drive coupler. We see this on Crowley HOA gates after vehicle strikes or ground movement. Realignment runs $160 to $280. Call (903) 417-0793 and we’ll diagnose the drive system in one visit.
No, and you should be wary of anyone who says they can. A new gate operator installation requires measuring the gate weight and length, selecting the correct duty-cycle motor, running or verifying power, and installing and testing safety edges and photocells. That’s a measured, quoted, and scheduled job. We’ll schedule a free measure and give you a written price before any work is booked. Call (903) 417-0793 to set that up.
Yes. Rural properties in Crowley without grid power near the gate rely on solar-charged battery systems, and the most common failure is battery degradation, which stops the gate mid-cycle. We test the panel output, battery health, and charge controller, and replace what’s dead. Solar diagnostics run $150 to $250 plus parts. Call (903) 417-0793 and we’ll bring the test equipment.
Call Calder Gate Repair in Crowley
When your gate won’t open, sags, or refuses to reverse, you want a real arrival time, a written price, and a tech who knows whether the problem is in the post footing or the operator. That’s exactly what Calder Gate Repair delivers in Crowley. Call (903) 417-0793 now for a free estimate. A live person answers 24/7.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family.