Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lancaster
A gate that won’t open, drags on the ground, or reverses halfway through its cycle is a real problem in Lancaster. It locks you out of your own driveway, leaves your property exposed, and only gets worse the longer you wait. Calder Gate Repair handles electric gate repair, automatic gate repair, and heavy wrought iron gate repair across Lancaster, including the neighborhoods off West Main Street, Belt Line Road, and Pleasant Run Road. Our techs know North Texas clay soil, they know the older ranch homes east of I-35 and the newer subdivisions going up toward Red Oak, and they arrive with parts for major brands already on the truck. Call (903) 417-0793 and you’ll get a live person, a written price before anything starts, and a real arrival time you can track.
Why Calder Gate Repair Is Lancaster’s Preferred Gate Repair Company
Most of the gates we work on in Lancaster were installed years ago by whoever built the fence or poured the driveway. That’s created a lot of mismatched setups: a DoorKing operator wired to a post that’s now out of level, a Viking keypad mounted in a spot that catches every north Texas storm, a slide gate with rack teeth worn uneven because nobody re-leveled the track after the first wet season. Our techs have seen every version of these problems in Lancaster, and we fix them with the same approach every time: diagnose it, put the price in writing, do the work, and test the safety cycle before we leave.
Nico Alvarez leads our gate repair team. He’s trained our techs across nine major gate opener brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Lancaster because older properties here often have one brand of operator paired with a post or hinge setup that was never spec’d for it. We don’t just swap parts. We find out why the gate failed and fix that, too. The 365-Day Done Right Promise backs every repair in writing: if it fails within a year, we come back at no charge. No fine print and no fighting about it.
Wrought Iron Gate Repair in Lancaster
Wrought Iron Gate Repair in Lancaster usually means fixing a gate that’s been on the property for ten or twenty years and has started sagging, sticking, or scraping the driveway. The iron itself is rarely the problem. What fails first on Lancaster properties is the support: hinge posts that shifted in expansive clay soil, hinges that wore oval, or a gate that was welded heavy and hung without enough structure behind it. We inspect the post, the hinge barrels, the welds, and the operator mounting before we touch anything, because fixing a sag without correcting the post means you’ll call us again in six months.
Typical wrought iron gate repair in Lancaster runs $275 to $650 for sag correction, hinge replacement, or post bracing, including the return visit to re-level the operator and test the safety edges. A full post reset with new concrete footing goes higher, usually $650 to $1,200, because the old footing has to be broken out and the post re-poured and allowed to cure before the gate hangs again.
Sag Correction and Post Resetting
Lancaster’s clay soil expands after a wet spring and shrinks in a hot summer, and that movement pushes posts out of plumb. A gate that dragged for months usually has a hinge post leaning just enough to pull the gate into the path of the safety photocell. We reset the post in a deeper footing, re-hang the gate, and run the reverse cycle multiple times to confirm the safety system reads clean.
Weld and Hinge Repair
On a heavy wrought iron gate, the hinge barrels do most of the work and fail first. We replace worn hinge barrels and reinforce cracked welds on the panel itself, then re-balance the gate so the operator isn’t fighting extra weight on every cycle. A gate that opens smooth by hand before the operator is reattached is a gate that will last.
Metal Gate Repair in Lancaster
Metal Gate Repair in Lancaster covers the broader range of steel and aluminum gates on local properties, from lightweight aluminum drive gates in newer subdivisions to heavy steel swing gates on older ranch lots. The most common call we get is a metal gate that sags in the middle, usually because the frame was built without enough diagonal bracing or the post has moved in the soil. We can often true up the frame, add a tension cable or brace, and return the gate to level without a full replacement.
Repair pricing for a metal gate in Lancaster typically runs $225 to $550 for frame correction, wheel and track replacement, or latch and lock repair. If the gate needs welding reinforcement at the hinge stiles or corner joints, expect $400 to $800 depending on how much of the panel has to be cut and reinforced. All pricing is written and agreed before any work starts.
Track and Roller Replacement
Slide gates that rumble or bind usually have flat spots on the rollers or rust pitting along the track. We replace the rollers, clean and re-seat the track, and check the rack teeth for uneven wear, which happens fast on gates that were never re-leveled after the post moved.
Latch, Lock, and Alignment Work
A metal gate that won’t close fully is often an alignment issue at the latch, not a lock problem. We correct the hinge geometry first, then restore the latch and lock so the gate closes with a firm seat and the lock engages without forcing. This matters on Lancaster properties where a gate that closes but doesn’t latch leaves the backyard open.
Trusted Brands We Service in Lancaster
Our techs work on gate openers from DoorKing, Ghost Controls, and Linear every week in Lancaster. DoorKing operators show up most often on the older drive gates around Lancaster’s ranch-style properties, while Ghost Controls and Linear are common on newer home lots and light-duty gates. We keep repair parts for these brands stocked in our Dallas-Fort Worth dispatch office, and our trucks carry the common boards, limit switches, and remotes, so most Lancaster calls are resolved in one visit instead of two. If your opener is a brand we don’t stock on the truck, we order it same-day and schedule the return trip before we leave your driveway.
Common Gate Repair Problems We See in Lancaster Homes
- Hinge posts shifting in North Texas clay. After a wet spring, the soil around a post expands unevenly and pushes it out of plumb. The gate sags, the safety photocell trips mid-cycle, and the operator reverses even though the motor is fine.
- Worn rack and pinion teeth on slide gates. Slide gate operators from FAAC and BFT fail when the rack teeth wear unevenly on a gate that was never re-leveled after the original install. The operator pushes harder to compensate, overheats, and eventually trips the breaker.
- Corroded wiring at the post footing. On older Lancaster properties, the original conduit wasn’t sealed where it enters the post. Rain and irrigation water collect there, and the loop detector or keypad wiring corrodes until the gate stops responding.
- Mismatched operator and post setups. Lancaster’s mix of older ranch properties and newer subdivisions means we regularly find a LiftMaster operator on one side of the driveway and a FAAC on the other, wired to separate posts that were never meant to work together. The gate works for years, then one failure cascades into the other system.
Pricing for Gate Repair in Lancaster, TX
Here’s what Lancaster homeowners can expect for common gate repairs: electric gate operator repair runs $275 to $600 in most cases, hinge and post work runs $275 to $650, sag correction on a metal or wrought iron gate runs $300 to $800 including re-balancing, and a complete opener replacement with new safety edges runs $850 to $1,800 depending on brand and gate weight. Full gate installation work, including groundworks, power run, safety edges, and reversal testing, starts around $2,200 and goes up from there based on the gate size and control system. Every quote is free, in writing, and agreed before we start. If the repair fails within 365 days, the return visit is free under the 365-Day Done Right Promise. For an exact quote on your gate, call (903) 417-0793.
We Also Serve Cities Near Lancaster
Our Gate Repair coverage extends from Lancaster to the surrounding communities of Hutchins, DeSoto, Wilmer, and Red Oak. If your gate is acting up and you’re anywhere near those areas, the same written pricing and 365-Day Done Right Promise apply. For more on how we serve the whole area, see Gate Repair in Lancaster and surrounding towns.
Serving Lancaster, TX - Our Local Coverage Area
We’re based in the Lancaster area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lancaster
Nine times out of ten, a gate that opens halfway then reverses is tripping a safety photocell or edge sensor, not a failing motor. The gate moves, the sensor detects something in the path, or a loose wire from post movement interrupts the safety circuit, and the board commands a reverse. In Lancaster, the usual culprit is a hinge post that shifted in clay soil and let the gate droop into the photocell beam. We check the sensor alignment, the post plumb, and the safety edge wiring before touching the operator. If the gate is sagging, fixing the post usually clears the reversal. Call (903) 417-0793 to schedule a diagnostic, and we’ll put the repair cost in writing before any work starts.
A proper gate installation in Lancaster typically takes two to five working days from start to finish, depending on the gate type, groundworks, and power run. That includes one to two days for post footings and curing, a day for hanging and welding the gate, a day for the operator and control wiring, and a final morning for safety edge installation and full reversal testing. We never promise same-day installation because concrete has to cure and wiring has to be landed correctly. What we do promise is a written price and a scheduled completion date before the first hole is dug.
We service all nine major gate opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Lancaster specifically, we see DoorKing and Linear on older drive gates, and Ghost Controls on newer properties. If your operator is a brand we didn’t list, call (903) 417-0793 anyway. Chances are we have the crossover part on the truck, and if we don’t, we’ll tell you before you spend a dime.
After a Lancaster storm, a dead gate keypad is usually caused by water intrusion through a cracked housing or rain running down the post and into an unsealed wiring conduit. The keypad board shorts, the keypad goes dark, and sometimes the operator itself stops responding to open commands. We replace the keypad or seal the conduit, and if the storm also shifted the post or loosened a wire at the loop detector, we correct that while we’re there. Call (903) 417-0793 and we’ll get a tech to your Lancaster address with a written price before we open a single panel.
Usually not. A sagging metal gate in Lancaster can often be corrected by truing the frame, adding diagonal bracing or a tension cable, and resetting the hinge post if it moved in the soil. Full replacement only makes sense when the metal itself is rusted through at the corners or the frame is compromised to the point that welding would be a patch, not a fix. We’ll tell you which situation you have, show you the damage, and give you a written price for both options before you decide.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Lancaster and the surrounding Dallas-Fort Worth area.