Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lewisville
A gate that won’t open isn’t just an inconvenience, it’s a security risk and a daily headache. Most gate opener repairs in Lewisville run $185 – $340 before parts, and our technicians arrive with the common failure parts already on the truck. Calder Gate Repair is the dedicated gate division inside the Relay Home Co. family, and our crews know Lewisville’s older east-side lots, the newer developments up near 407, and everything in between. Call (903) 417-0793 and a live person answers, 24/7, not a voicemail tree.
Why Calder Gate Repair Is Lewisville’s Preferred Gate Repair Company
We’re not a general handyman service with a gate page bolted on. Gate Repair is all we do, which means our technicians have seen your exact problem before, on your exact brand of opener, probably somewhere in Lewisville within the last month. Lewisville homeowners tell us the same three things: they want a real arrival time they can track, a price that doesn’t change at the door, and a repair that holds. Those are our non-negotiables, and they’re written into every job we do.
Every Calder technician is background-checked and shows up in uniform. You get a live arrival time, not a four-hour window. The price is written down and agreed to before a single bolt gets turned. And the repair itself carries the 365-Day Done Right Promise: if it fails within a year, we return at no charge. Nico Alvarez runs the team here, and he holds every job to that standard.
Driveway Gate Repair in Lewisville
Driveway gate repair in Lewisville usually means one of two things: a gate panel that swings or slides but fights back, or an opener that runs but doesn’t move the gate. We fix both. On swing gates, the hinge post is almost always where the trouble starts. On slide gates, it’s the rack and pinion, the track, or the opener’s limit switch, the small sensor that tells the gate when to stop. Most jobs run $210 – $380 including labor, with parts quoted separately before we install anything.
Slide Gate Track and Rack Work
Slide gates in Lewisville’s older neighborhoods rarely sit on a perfectly level track. Concrete shifts, wheels wear, and the rack and pinion start binding. We re-align the rack to the gate’s actual travel path, replace worn teeth sections, and test the full cycle before we call it done.
Hinge and Post Realignment
When the hinge post leans, the gate panel drags on the ground on every cycle. The fix is rarely just lubrication. We check the post footing, re-set it if the concrete has cracked or shifted, and only then re-hang the panel. Skipping the footing check is why so many Lewisville gates sag again within six months.
Gate Welding in Lewisville
Gate welding in Lewisville covers everything from a cracked hinge bracket to a full frame repair after a windstorm or a slow-motion car bump. If the weld is on a stressed joint, like where the pickets meet the bottom rail, we grind back to clean metal, fixture the panel square, and weld both sides. Most welding repairs run $150 – $450 depending on how much of the frame needs attention, and we always repaint or coat the repaired area afterward so it doesn’t rust out in DFW humidity.
Frame and Rail Welds
A sagging gate isn’t always the post. Sometimes the frame itself has cracked at a corner weld, and the panel twists under its own weight. We inspect the entire frame before welding so the repair lands where the stress actually is.
Picket and Decorative Work
Loose or broken pickets, bent scrollwork, a top rail that’s pulling away from the panel, these are common on decorative iron gates throughout Lewisville. We match the weld style as closely as the original and finish with a rust-inhibiting coat so the repair blends in.
Trusted Brands We Service in Lewisville
We’re factory-familiar with nine major gate opener brands, and for Lewisville homeowners that matters because wrong diagnostic guesses waste your money. We work daily on Viking, Ghost Controls, and DoorKing units, plus LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. We keep common boards, limit switches, and receiver modules stocked locally, so a simple repair doesn’t turn into a two-week parts wait.
Common Gate Repair Problems We See in Lewisville Homes
- Sagging swing gates from shifted posts. Expansive clay soil under Lewisville moves with every wet-dry season, and hinge posts set without deep footings lean within a few years. Fixing the panel without fixing the post guarantees a repeat call.
- Slide gate openers burning out early. When a gate settles after install, the rack and pinion no longer align, and the motor works against friction on every cycle. LiftMaster and FAAC units are tough, but not against constant drag.
- Missing or bypassed safety sensors. We find photo-eyes and safety edges unplugged or jumped out on a surprising number of Lewisville driveways. That’s a UL 325 violation and a real injury hazard, especially for kids and pets.
- Keypad and loop detector wiring failing from humidity and irrigation. DFW moisture and sprinkler overspray corrode low-voltage wiring, causing intermittent open and close calls that work fine when we’re standing there but fail the next morning.
Pricing for Gate Repair in Lewisville, TX
Honest numbers so you’re not calling blind. A basic swing gate realignment in Lewisville runs $185 – $275. Slide gate rack and track work runs $240 – $420. Opener board or limit switch replacement runs $210 – $340 plus the part. Full weld repairs run $150 – $450 depending on the damage. Every quote is written down before work starts, and the number on the invoice is the number you approved at the door, never a surprise. Estimates are free, so call (903) 417-0793 and get a real price from a real person.
We Also Serve Cities Near Lewisville
While this page covers Gate Repair in Lewisville, our crews also handle gate work in Lake Dallas, Coppell, The Colony, and Flower Mound. Same written pricing, same 365-Day Done Right Promise, same live person on the phone.
Serving Lewisville, TX - Our Local Coverage Area
We’re based in the Lewisville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lewisville
Usually the gate itself. When the panel binds on a shifted post or misaligned rack, the opener’s obstruction sensor reads the resistance and stops the cycle to protect the motor. We test the full open and close path to separate mechanical drag from electrical faults, and in Lewisville the drag is most often from clay-soil post movement. That’s why we check footings before swapping the control board. Call (903) 417-0793 and we’ll diagnose it on site.
Most common repairs, like a limit switch, a receiver board, or a hinge adjustment, are done in one visit, usually 90 minutes to two hours once we’re on site. Jobs that involve re-setting a post or re-welding a cracked frame take two visits because the concrete or weld needs cure time before the gate is cycled. We’ll tell you the expected timeline before any work starts, and you’ll have it in writing.
Yes. We service solar-charged systems and battery-backup operators from Ghost Controls, Mighty Mule, and DoorKing, among others. Common Lewisville issues we see are undersized solar panels for shaded posts and batteries that drain when the panel gets morning frost or afternoon shadow. We test the full charging circuit and the operator under load, not just the gate’s open and close cycle.
Yes, it’s a UL 325 requirement. Every automatic gate needs entrapment protection, either photo-eyes that detect an object in the path or a safety edge that reverses the gate on contact. We find unplugged or bypassed sensors regularly on older Lewisville installations. If yours are missing or non-functional, we’ll show you exactly what’s wrong and quote the repair before touching anything, and the gate shouldn’t be run in automatic mode until the protection is restored.
Sometimes. If the frame itself is cracked, a good weld is the right fix. But if the post has shifted, welding the panel without correcting the footing just moves the stress to the next joint, and you’ll be calling us again in eight months. Near Old Town Lewisville off Main Street, we re-set a post footing on a 14-foot slide gate where the concrete had shifted; the rack and pinion had worn teeth from the panel binding. Two-visit job, and the gate has run clean since. Call for a free assessment and we’ll tell you which fix you actually need.
Contact Calder Gate Repair in Lewisville
If your gate is stuck, dragging, beeping, or just acting unpredictable, call (903) 417-0793. A live person answers, the estimate is free, and the price is written down before any work starts. That’s the Relay Standard, and it’s what we’ve built the whole company on.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Lewisville and the surrounding DFW area.