Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Orlando
If your gate won’t open, drags on the ground, or makes a sound like a garbage disposal eating a fork, you’re in the right place. Calder Gate Repair handles gate repair across Orlando, FL every day, from Lake Eola to Baldwin Park to College Park. We know the soil, the humidity, and the way a Florida afternoon thunderstorm can scramble a safety sensor. Call us at (903) 417-0793 and a live person answers, 24/7. We’ll give you a written price before any work starts, and every repair is backed by our 365-Day Done Right Promise.
Why Calder Gate Repair Is Orlando’s Preferred Gate Repair Company
Orlando homeowners have a specific set of expectations. They want a real arrival time they can track, a tech who shows up in uniform and knows the equipment, and a price that doesn’t change at the door. That’s the Relay Standard we run every job by. You get a live link to track your technician’s arrival, before-and-after photos of the work, and a digital invoice you pay from your phone.
Calder is the dedicated Gate Repair team inside the Relay Home Co. family, founded in 2009 and independently owned. Nico Alvarez leads the crew. Every tech is background-checked, factory-trained on nine major opener brands, and familiar with the specific failure patterns we see in Central Florida. Our Orlando customers regularly tell us the same thing: the tech showed up when promised, explained the fix in plain English, and the invoice matched the quote.
Wrought Iron Gate Repair in Orlando
Wrought iron gate repair in Orlando is a year-round need, but we see a sharp spike after the summer rainy season. The combination of sandy soil, a high water table, and daily downpours works on hinge posts until the gate sags and starts dragging against the ground. Once that happens, the operator has to work harder, and eventually it fails. We reset and reinforce the hinge post, repair or replace bent pickets, and bring the gate back to level. Most wrought iron repairs in Orlando run $220 – $480, depending on how far the post has shifted and whether welding is required.
Hinge and Post Reinforcements
When a hinge post loosens in Orlando’s sandy soil, re-tightening the bolts only buys you a few weeks. The fix is usually a deeper footing or a concrete collar around the post base, then re-hanging the gate so it swings clean. We also check the top hinge for wear, because once the gate sags, the top hinge takes all the load and ovalizes the bolt holes.
Rust Repair and Repainting
Orlando humidity is relentless on raw metal. We grind out rusted sections, weld in new steel where the gate has rusted through, and treat the surface before priming and painting. If the gate has decorative scrollwork, we match the radius so the repair doesn’t look patched. Expect $180 – $350 for a typical rust-repair section on a single swing gate.
Metal Gate Repair in Orlando
Metal gate repair in Orlando covers aluminum, steel, and tube-frame gates, and the most common call is a gate that won’t stay aligned or won’t close all the way. Aluminum gates are lighter and resist rust, but their welds crack at stress points. Steel gates are heavier and put more strain on posts and operators. Either way, we straighten the frame, replace damaged sections, and re-align the gate. Most metal gate repairs land between $200 – $550 in Orlando, with full post replacement on the higher end.
Gate Realignment and Wheel Replacement
Slide gates in Orlando neighborhoods like Dr. Phillips and Waterford Lakes often fail at the guide wheels. Sand and gravel from yard work get into the track, the wheels wear unevenly, and the gate starts grinding. We replace the wheels, clean the track, and set the gate level again so the operator doesn’t burn out fighting a misaligned load.
Weld Repairs on Aluminum Frames
Aluminum cracks where it flexes, usually at the corners or where the opener bracket attaches. We TIG-weld those joints, add a gusset plate when the original design was underbuilt, and re-test the gate’s full travel. A single corner weld repair in Orlando typically runs $150 – $250, and we quote the full price in writing before we strike an arc.
Trusted Brands We Service in Orlando
Our Orlando techs are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and DoorKing, among others. We keep common Linear and Ghost Controls boards, Viking loop detectors, and DoorKing remote receivers in local parts stock, so most opener repairs don’t wait on a two-week backorder. If you have an older Viking swing gate or a DoorKing slide operator from the early 2000s, we can usually repair it the same visit instead of pushing a full replacement.
Common Gate Repair Problems We See in Orlando Homes
- Hinge posts sinking after heavy rain. Orlando’s sandy soil doesn’t hold a shallow footing. When the ground saturates, posts shift, the gate sags, and the opener starts straining. The fix is a deeper footing or concrete collar, not just tightening bolts.
- Safety photocells knocked out of alignment. Lawn crews, landscaping, and storm winds move the sensors. When they’re misaligned, the gate refuses to close or reverses mid-cycle. We realign, test, and re-set the beam signal.
- Control boards corroded by humidity. Orlando’s air is moist, and a thunderstorm blows moisture into the control box housing. Corroded terminals cause intermittent failure. We clean, repair, or replace the board and seal the housing properly.
- Loop detectors failing after yard work. Driveway loops get cut or disturbed when sod is replaced or irrigation lines are trenched. Then the gate won’t auto-close or won’t open for exiting cars. We test the loop wire and replace it if it’s been severed.
Pricing for Gate Repair in Orlando, FL
Most gate repairs in Orlando run between $180 and $550 before parts. That covers hinge post resets, gate realignment, weld repairs, rust repair, and keypad or photocell replacement. Operator control boards run higher, typically $300 – $700 with the board. The biggest cost variable in Orlando is what the soil has done to the posts. A gate that’s sagged for months usually needs a new footing, not just an adjustment. We give you a written price before any work starts, and that’s the number you pay. No revised total at the end. Call (903) 417-0793 for a free estimate.
We Serve All of Orlando and Nearby Communities
We cover every neighborhood in Orlando, from Lake Nona to MetroWest to Audubon Park. The crew is dispatched from our Orlando office, so response times to Winter Park, Maitland, Goldenrod, and Altamonte Springs are tight. See the full Gate Repair in Orlando service area to confirm your neighborhood is covered.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Orlando
Tightening hinges doesn’t fix a sagging gate in Orlando because the problem is almost always the footing under the hinge post, not the bolts. Sandy soil shifts when it gets saturated, and the post tilts. The repair is to reset the post deeper or add a concrete collar, then re-hang the gate. Call (903) 417-0793 and we’ll assess the footing and give you a written price.
Test the safety reverse at least once a month, and right after every major storm. Orlando’s thunderstorms knock photocells out of alignment and debris from wind can block the beam, which disables the auto-close function. If the gate doesn’t reverse when you block the sensor path, call us and we’ll diagnose it.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and DoorKing, among others. Our Orlando techs carry common control boards, remote receivers, and loop detectors in local stock for those brands. If you have a Viking, DoorKing, or Linear operator, there’s a good chance we fix it the same visit.
Yes. We cut out the rusted section, weld in new steel matched to the original profile, and treat the surrounding metal to slow future rust. Orlando humidity means unpainted or chipped metal will rust through eventually, so we finish with a primer and paint that seals the steel. Rust-repair sections typically run $180 – $350.
In most cases, yes. For repair work like a gate that won’t open, a failed opener, or a misaligned safety sensor, we can usually get a tech to you the same day you call. New gate installations and full operator replacements are scheduled, not same-day. Call (903) 417-0793 and a live person will tell you realistically when the tech can arrive.
What Makes Gate Repair Different in Orlando
The single biggest reason gates fail faster in Orlando than anywhere else we work is the soil. The high water table and sandy substrate mean a shallow concrete footing doesn’t hold. After a heavy rain, the ground shifts just enough that the hinge post tips a degree or two, and that’s enough to make a 300-pound gate drag. We see it constantly in neighborhoods like Conway and Winter Park Pines, where lots were built over reclaimed wetland. The repair isn’t just re-leveling the gate; it’s fixing the footing so the problem doesn’t come back in the next rainy season. That’s why our quotes always include a note on what’s happening below ground, not just what you can see.
We were called to a home near Lake Eola recently where a LiftMaster swing gate had stopped responding. The gate was dragging on the ground and the safety photocell was misaligned. After correcting the sag by re-setting the hinge post and adjusting the rack and pinion, we realigned the photocell and tested the reverse function. The gate now runs smoothly and meets UL 325 entrapment protection requirements.
If your gate is sagging, stuck, or making noise, don’t wait for the next storm. Call Calder Gate Repair at (903) 417-0793 for a free estimate. A live person answers, every time, day or night. You’ll get a written price before any work begins, a written guarantee, and a tech who tracks to your door like a rideshare. That’s the Relay Standard, and it’s how every job in Orlando gets done.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Orlando and surrounding communities.