Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Plantation
If your driveway gate in Plantation won’t open, drags on the ground, or stopped responding to the remote, here’s the straight answer: most gate opener repairs run $180 – $380 before parts, and most hinge or post issues run $240 – $600 depending on whether we’re re-setting a footing or just realigning the panel. Calder Gate Repair serves the whole Plantation area, from Jacaranda to Plantation Acres, with background-checked techs who arrive in uniform and quote a written price before any work starts. Call (903) 417-0793 and you’ll talk to a live person, not a recording.
Key Takeaways
- Driveway gate repair in Plantation typically runs $180 – $600 depending on the failure point, with parts quoted separately before work begins.
- Plantation’s sandy, canal-adjacent soil causes hinge posts to shift after heavy rain, so a dragging gate often needs a footing re-set, not just an adjustment.
- Calder techs service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators.
- Every repair carries the 365-Day Done Right Promise: if it fails within a year, we return at no charge.
- Call (903) 417-0793 for a free estimate and a live arrival time you can track from your phone.
Why Calder Gate Repair Is Plantation’s Preferred Gate Repair Company
Plantation homeowners tell us the same three things on every call: they want someone who knows the gate brands, they want a price before the work starts, and they don’t want to sit around waiting in a four-hour window. That’s how we run every job. We’re the gate repair specialist inside the Relay Home Co. family, established in 2009, and our techs train across nine major opener brands so we’re not figuring out your FAAC or LiftMaster on the fly. When you book, you get a live arrival time you can track, the same way you’d follow a rideshare.
Nico Alvarez leads our South Florida crews, and the standard he set is simple: written price at the door, written guarantee with the invoice, and a real answer when you call. The 365-Day Done Right Promise backs every repair we do in Plantation. If the same failure comes back within a year, we come back free. That’s not a slogan, it’s printed on the job sheet.
We know Plantation’s streets, from the canal-adjacent lots near the New River forks to the older subdivisions with mature oak canopy along NW 4th Street and Broward Boulevard. That local knowledge matters when we’re diagnosing why your gate seized, because the answer is usually in the soil, the drainage, or the power feed, not just the motor. Call (903) 417-0793 and we’ll walk you through what we’d check on our first visit to your property.
Driveway Gate Repair in Plantation
Driveway Gate Repair in Plantation usually comes down to one of three things: the operator lost its mind after a power dip, the hinge post moved in sandy soil, or a safety sensor got knocked out of alignment. We start every job by testing the full system, because a gate that won’t open could be a dead capacitor, a shifted post, or a photocell that’s reading its own shadow. Most diagnostics take under an hour on site, and we quote the fix before we turn a single bolt.
Operator Diagnosis and Reset
Storm-season power dips in Plantation knock gate operators offline, and when the board comes back without a clean reset, the gate defaults to a hard stop. Homeowners call us saying the motor is dead. Half the time it’s a reset sequence and a limit switch adjustment, which is a sub-$200 job. We’ll tell you that before we open the panel, not after.
Post and Hinge Realignment
Plantation’s canal-adjacent lots put many gate posts within a few feet of the swale. After heavy rain, the sandy soil around the footing loses its grip and the post starts to lean. A swing gate that drags on one side is rarely a bent panel, it’s a post that moved. We re-set the footing, pack it properly, and align the hinges so the gate swings level through the wet season.
Gate Welding in Plantation
Gate Welding in Plantation covers cracked frames, broken hinge plates, rusted bottom rails, and snapped pickets on aluminum and steel driveway gates. We carry a mobile welder to every job, so most cracks can be repaired on-site the same day we diagnose them. If the corrosion is deep enough that the frame has lost structural strength, we’ll tell you straight and quote a section replacement instead of patching something that’ll fail again.
Cracked Frame and Hinge Plate Repair
Older Plantation gates, especially the steel tube frames in the established neighborhoods around Jacaranda and east of the Florida Turnpike, crack at the hinge welds after years of wind load and closing force. We grind out the crack, re-weld the joint, and add a gusset plate where the design allows. The repair is stronger than the original weld.
Rust Repair on Bottom Rails
Bottom rails rust from the inside out because Plantation’s irrigation overspray and canal humidity keep the lower frame damp. We cut out the rotten section, weld in fresh steel or aluminum to match, and coat the repair so it doesn’t become a repeat problem. Pricing for typical weld repairs runs $150 – $450 depending on the length of the section and whether we’re doing it in place or pulling the panel.
Trusted Brands We Service in Plantation
We’re factory-familiar with nine major opener brands, and the Plantation calls we run most often are LiftMaster, FAAC, BFT, and Linear units. That matters because a FAAC board doesn’t fail the same way a LiftMaster board does, and a Viking actuator has a different load test than a DoorKing operator. We keep common replacement parts stocked locally for Plantation customers, which means a board swap or a limit switch replacement often goes from diagnosis to done in a single visit. If you have a Ghost Controls or Elite opener, we handle those too, same standard, same written price before the work.
Common Gate Repair Problems We See in Plantation Homes
- Post migration in sandy, canal-adjacent soil. Plantation’s swale-adjacent lots get saturated during the wet season, and swing gate posts drift. The gate drags, the hinges bind, and the operator starts tripping its force sensor. Re-setting the footing is the real fix, not cranking the limit switch.
- Slide gates seizing from oak canopy debris. Established Plantation subdivisions have mature oaks that drop sap and grit onto rack-and-pinion tracks. The gate starts jerking, then stops reversing on the safety photocell. We clean the rack, inspect the pinion, and re-test the obstruction response.
- Operator lockout after storm power dips. A quick brownout during a summer storm can scramble the board’s memory. The gate stops mid-cycle and the remote does nothing. Usually it’s a reset and re-learn sequence, but if the capacitor took the hit, we replace it on the spot.
- Photocell misalignment from lawn equipment. Plantation crews use trimmers and blowers around gates, and a knocked photocell is the most common reason a gate refuses to close. We realign the beam, verify the UL 325 reversal test, and show you the result before we leave.
Pricing for Gate Repair in Plantation, FL
Here’s what we quote in Plantation, in real numbers. A limit switch replacement runs $120 – $220. A capacitor and board reset runs $140 – $260. Hinge and post realignment runs $240 – $500 depending on whether the footing needs re-setting. Gate welding repairs run $150 – $450 by the section. A full operator replacement, including new arms, safety edges, and programming, runs $900 – $1,800 depending on the brand and whether it’s solar or line voltage. Every quote is written before the work starts, and that number is the invoice number. Call (903) 417-0793 for a free estimate, no obligation.
We Also Serve Cities Near Plantation
Calder Gate Repair handles gate work across northwest Broward. We serve Gate Repair in Plantation and the surrounding communities, with regular routes through Fort Lauderdale, Margate, Coconut Creek, and Pompano Beach. If you’re a few blocks outside the Plantation line, you still get the same written-price standard and the same live arrival tracking. Our Gate Repair team covers the full area from one dispatch desk, so you’re not getting bounced between offices.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Plantation
Nine times out of ten it’s the post, not the panel. Plantation’s sandy soil around canal-adjacent lots lets hinge posts settle and lean after heavy rain, so the gate is actually tilted, not bent. We check the post plumb, the footing, and the panel alignment on the first visit, then quote the real fix, which is usually a re-set footing, not a panel replacement. Call (903) 417-0793 and we’ll diagnose it on site.
Your operator needs a functioning obstruction-reversal system that meets UL 325, which means the gate reverses when it contacts something or trips the photocell, and it can’t crush a child or pet. Most Plantation gates we test pass, but we find photocells that are misaligned, safety edges that are cracked, and operators that were installed without a proper entrapment test. We test every gate we service against the current standard and show you the result before we leave. If it’s not safe, we quote the upgrade before we touch anything else.
Yes. We carry a mobile welder on the truck, so a cracked frame, a broken hinge plate, or a rusted bottom rail can usually be welded in place on the same visit. For hairline cracks in aluminum, we’ll TIG weld and grind the repair smooth. For deep rust in steel tube frames, we cut the bad section, weld in replacement stock, and coat it. A typical on-site weld repair runs $150 – $450, and you’ll have the written price before the torch comes out. Call (903) 417-0793 for an exact quote.
We service all three, plus BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. LiftMaster is the most common operator in Plantation’s newer subdivisions, while FAAC and DoorKing show up on many older estate gates and commercial properties. We stock common boards, capacitors, and limit switches for these brands locally, so the repair often wraps up in one visit. The 365-Day Done Right Promise applies to every operator repair we do in Plantation, regardless of brand.
Yes, and it’s a common request in Plantation where a gate sits far from a power source or the canal-side swale makes trenching expensive. A solar setup uses a panel, a charge controller, and a battery bank sized to your gate’s duty cycle. Most Plantation homes need a minimum 20-watt panel and two deep-cycle batteries to run a daily-use swing gate, but we’ll size it on your actual usage, not a guess. Full solar conversions run $1,200 – $2,200 installed. Call (903) 417-0793 for a written quote and a site assessment.
Call Calder Gate Repair for Gate Repair in Plantation, FL
If your gate is dragging, seizing, stuck open, or just refusing to respond, don’t wait until it leaves your driveway unsecured overnight. Call (903) 417-0793 now and you’ll get a live person on the line, not a call tree. We’ll book a visit with a trackable arrival time, send a background-checked tech in uniform, and put the price in writing before any work starts. Nico Alvarez and the crew back every Plantation job with the 365-Day Done Right Promise: if it fails within a year, we come back at no charge. That’s the whole deal, stated plainly, because that’s how we work.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Plantation, FL.