Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Southlake
Gate repair in Southlake usually comes down to two things: a heavy gate leaf that has shifted on its hinge post, or an opener that has lost its alignment after months of North Texas weather. Most repairs run $180 to $650 depending on what failed, and we can typically get to your Southlake property the same day for emergencies. Calder Gate Repair is the dedicated gate division inside the Relay Home Co. family, and we’re set up specifically for the kinds of estate gates Southlake homeowners actually have. Call (903) 417-0793 and a live person answers, 24/7.
Why Calder Gate Repair Is Southlake’s Preferred Gate Repair Company
Southlake homeowners call us because we give them a number before we touch the gate. Not a range that widens later. A written price. Every job, no exceptions. Our technicians do the same walk-through on a Timber Lake circle driveway as they would on a Shady Oaks Drive estate entrance, and the invoice matches the quote or we stop and talk before proceeding.
Nico Alvarez leads our gate repair team with a simple rule: if a Southlake customer can’t explain the repair back to us in plain words, we haven’t finished the job. That means no mystery line items, no “operator logic board recalibration” without an explanation of what it does and why it failed. We decode the trade language as we go, so you understand exactly what you’re paying for.
We carry parts for the opener brands you’re likely to own and schedule Southlake routes daily, which means a technician who has already fixed three gates in your ZIP code this week isn’t learning on yours. The 365-Day Done Right Promise applies to every repair we make in Southlake: if the fix fails within a year, we return at no charge. That’s on paper, on every invoice, not spoken as a slogan.
Driveway Gate Repair in Southlake
Driveway gate repair in Southlake means working with gates that are often ornamental iron or stained cedar, mounted to masonry piers rather than simple steel posts. That changes the job. A gate that “just started scraping” is rarely a bent leaf. It’s almost always the hinge post or pier footing that has settled, throwing the entire swing plane out of square.
Most driveway gate repairs in Southlake run between $190 and $480 for hinge, roller, or track corrections, before any new parts like an opener control board or loop detector. A full operator replacement on a heavy custom gate can push into the $800 – $1,400 range depending on the drive type and how much wiring needs to be re-run. We give you that written range before any work starts.
Hinge Post and Pier Footing Correction
A sagging swing gate on a Southlake estate lot is rarely the fault of the leaf itself. The masonry pier shifts, the hinge post leans, and suddenly 500 pounds of iron is dragging across the driveway. We reset and re-grout the footing, shim the post true, and then realign the gate so the operator isn’t fighting an angle it was never designed for.
Operator Alignment After a Sag
When a gate has sagged even a half inch at the hinge line, the opener arm geometry changes. That extra resistance burns out capacitors, strips gear teeth, and trips fault codes. We correct the sag first, then reposition and reprogram the operator. Doing it the other way just means you’ll call us again in three months.
Gate Welding in Southlake
Gate welding in Southlake typically comes up when a hinge ear cracks, a decorative scroll snaps at a stress point, or a slide gate’s rack section pulls away from the rail. On older custom iron gates, these failures are common after years of thermal cycling: North Texas swings from 110-degree afternoons to overnight freezes, and thin ornamental sections fatigue.
Small crack repairs and hinge re-welds run $150 to $325. A more involved job, like replacing a broken gate frame section and repainting to match, typically lands in the $400 to $700 range. We quote the weld repair in writing before touching the metal, and our welders are the same technicians who do the operator work, so the structural fix and the automation stay compatible.
Ornamental Iron Crack Repair
Most ornamental gates on Southlake properties are mild steel with a factory finish. The cracks usually start at the weld joints, not in the middle of the picket. We grind, re-weld, and often add a small internal gusset to keep the same break from repeating. Then we blend and finish so the repair doesn’t look like a band-aid.
Slide Gate Rack and Rail Welds
Slide gates in Southlake tend to use rack and pinion drives, where a toothed rail runs the length of the gate. If a section of that rack breaks loose, the gate chatters and stalls. We re-weld the rack, check the rail level, and clear the track so the next storm doesn’t jam it again.
Trusted Brands We Service in Southlake
Our technicians train on nine major opener brands, and in Southlake we see a lot of Viking and Elite swing gate operators on estate lots, plus Ghost Controls on newer residential installs. We stock common boards, remotes, and safety sensor replacements for these locally, so a repair doesn’t stall waiting on a week-long parts shipment. DoorKing slide gate operators are also common on the larger acreage properties along the southern edge of town. If you tell us the brand on the phone, we’ll confirm the parts loadout before the truck rolls.
Common Gate Repair Problems We See in Southlake Homes
- Swing gates sagging at the hinge post, not the middle. Heavy ornamental iron leaves on masonry piers settle over time, and the post footing gives way before the gate itself bends. The fix is footing work plus realignment, not just tightening hinges.
- Slide gate operators binding on rack and pinion drives. Live oak and cedar elm debris collects on the track after storms, and if the rail has gone even slightly out of level, the gate stalls. We clean, level, and re-time the limit switches.
- Loop detectors and keypads going intermittent after temperature swings. A cold snap followed by an 80-degree afternoon is enough to make a marginal loop sensor phantom-open or refuse to close. We test frequency and sensitivity and replace the loop when it’s drifted.
- Photo-eye and edge sensor faults after gate realignment. When a gate shifts, the safety beam path moves too, and the opener may fault or reverse mid-cycle. A proper repair includes re-aiming the photocells and testing UL 325 entrapment protection before we clear the code.
Pricing for Gate Repair in Southlake, TX
Most gate repairs in Southlake land between $180 and $650. Hinge and roller corrections run $190 to $480. Small weld repairs are $150 to $325. Operator control board replacement runs $275 to $550 installed, and a full operator replacement on a heavy custom swing gate is typically $800 to $1,400 depending on the drive and wiring. Every price is quoted in writing before we begin, and if the repair fails within 365 days, Calder returns free under the 365-Day Done Right Promise. We do offer free estimates; call (903) 417-0793 and a human picks up.
We Also Serve Cities Near Southlake
Our Gate Repair team works daily across the Southlake area and nearby communities. We serve Southlake plus Colleyville, Grapevine, Flower Mound, and Roanoke, with days routed to your part of the metro each week. If your gate is acting up and you’re in one of those towns, the same written pricing and one-year guarantee apply.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Southlake
Because the hinge post or masonry pier footing has settled, not the gate leaf itself. Adjusting the hinges without correcting the footing is a temporary fix on heavy ornamental iron gates. We reset the post, sometimes re-grouting the pier, then realign the gate and verify the operator isn’t working against the angle. Call (903) 417-0793 and we’ll assess the footing before quoting.
Yes. UL 325 entrapment protection is required for automatic gates, including photo-eyes across the gate path and, on many estate gates, contact edge sensors on the leading edge. After any repair we test both and document the results with before-and-after photos, so you have a record that the safety circuits passed.
Yes, we repair rack and pinion slide gate operators regularly across Southlake. The common failure points are the rack welds, the drive gear wear, and the limit switches. We inspect the rail level and clear debris from the track as part of the job, because a gate that binds on the rack will keep burning out operators until the rail is corrected.
Most repairs take one to three hours on site. For emergencies like a gate stuck open or an operator down, we can often dispatch to Southlake the same day for repair work. Installations and full operator replacements are scheduled and quoted separately, never rushed, and we never promise same-day turnaround on a new installation. Call (903) 417-0793 and we’ll tell you honestly whether it’s a repair call or an installation job.
We work on nine major brands including Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. In Southlake we see Viking and Elite most often on estate lots, Ghost Controls on newer homes, and DoorKing on larger acreage properties. We stock local parts for these so repairs don’t wait on shipping.
If your gate is dragging, stalling, or the opener just quit in Southlake, call (903) 417-0793. A live person answers, we’ll schedule a time you can track, and you’ll get a written price before any work starts. Calder Gate Repair is the gate repair team inside Relay Home Co., serving Southlake with straight answers and a 365-Day Done Right Promise on every job.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Southlake, TX.