Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Sunrise Manor
Gate repair in Sunrise Manor usually runs $180 – $340 for common opener and hinge fixes, and most jobs are finished the same day we arrive. If your gate is dragging, reversing on its own, or refusing to open at all, call Calder Gate Repair at (903) 417-0793 and we’ll give you a written price before any work starts. We know this side of the Las Vegas Valley well – the mid-century tracts off Lamb Boulevard, the newer infill near Hollywood Boulevard, the corner lots where wind and caliche do a number on post footings. You’ll get a live person on the phone, a trackable arrival time, and a technician who actually knows your opener brand.

Why Calder Gate Repair Is Sunrise Manor’s Preferred Gate Repair Company
Calder Gate Repair is part of the Relay Home Co. family, established in 2009, and we’ve built our Sunrise Manor reputation on showing up when we say we will and writing down a price before touching a bolt. Every technician is background-checked and arrives in uniform with a live, trackable ETA – not a four-hour window. Calls are answered by a real person 24/7, so when your gate fails at 6 a.m. on a workday, you’re talking to someone who can actually book the job, not a voicemail.
Our work in Sunrise Manor covers everything from original 1950s swing gates to modern solar operators on newer infill builds. That spread matters because the repair approach differs house to house. A Gate Repair team that only knows one era of hardware will misdiagnose the other. We service all of them.
Every repair from Calder carries the 365-Day Done Right Promise: if the repair fails within a year, we come back and make it right at no charge. That’s written on every invoice, not implied. And because we’re the dedicated gate repair specialist inside the Relay Home Co. family, the entire process – booking, arrival, photos, invoice – follows The Relay Standard: a digital paper trail you can check from your phone.
Metal Gate Repair in Sunrise Manor
Metal Gate Repair is the most common call we run across Sunrise Manor, and for good reason. Steel and wrought-iron gates take the full brunt of high desert wind, dust, and sun. The gate itself might be thirty years old and still sound, but the post footing underneath has shifted, or the hinge welds have started to crack. In Sunrise Manor, metal gate repair typically runs $250 – $650 depending on whether we’re re-welding, replacing hinges, or resetting a post.
Hinge and Post Repair
When a metal gate sags, Sunrise Manor homeowners usually assume the gate is bent. More often, the hinge post has loosened in its footing. We cut away the old weld, re-set the post in fresh concrete, and re-hang the gate so it swings level again. That fix runs $300 – $600 on average here.
Weld and Rust Repair
Surface rust is cosmetic until it isn’t. We grind down the affected areas, weld new steel where the frame has thinned, and prime and paint the repair to slow future corrosion. In the dry Sunrise Manor climate, a well-prepped weld repair holds up for years. Expect $200 – $500 for typical weld and rust work.
Wood Gate Repair in Sunrise Manor
Wood Gate Repair in Sunrise Manor usually means one of two things: a sagging gate that drags across the driveway, or a frame that’s splitting around the hinges. The older ranch-style homes here were built with solid wood gates that have decades of life left – if the hardware and posts are addressed. Most wood gate repairs in Sunrise Manor run $220 – $450.
Gate Realignment
Wood expands and contracts with every temperature swing, and Sunrise Manor gets plenty of those. Over time, the gate pulls away from the latch side, or the top rail dips. We realign the frame, replace worn hinges with heavy-duty hardware, and adjust the latch so it closes without shoulder force.
Post Replacement
When a wood post rots at the base, no hinge adjustment will hold. We pull the old post, pour a deeper footing with proper gravel drainage, and set a pressure-treated replacement. In the caliche soil common around Sunrise Manor, digging deeper and adding drainage gravel is the difference between a post that lasts five years and one that lasts twenty.

Trusted Brands We Service in Sunrise Manor
We’re factory-familiar with nine major opener brands, and in Sunrise Manor we most often see Linear, Viking, Ghost Controls, and DoorKing on gates. That matters because each brand has its own control board logic, limit switch setup, and battery backup behavior. Our trucks carry common parts for these brands, so a Linear arm that stripped its gear or a DoorKing board that stopped reading remotes doesn’t mean a week of waiting. We diagnose by brand, quote by brand, and repair with the right parts the first time.
Common Gate Repair Problems We See in Sunrise Manor Homes
- Photocell safety sensors misaligned or never installed. Sunrise Manor sees a lot of DIY and handyman work, and a misaligned photocell is the top reason a gate reverses mid-travel. It’s also a UL 325 compliance issue – if the safety edge or photocell isn’t working, the gate isn’t safe. We re-align or install sensors as part of most opener repairs.
- Sliding gates jumping the rack. The expansive clay soil under Sunrise Manor shifts with moisture, even the small amount we get. When the ground track settles unevenly, the gate binds and the rack and pinion skip teeth. We re-level the track, not just tighten the chain.
- Sagging swing gates eating opener motors. A swing gate that drags at the hinge post forces the operator to work harder every cycle. The motor overheats, the capacitor fails, and the homeowner replaces the operator – when the real fix was always the footing. We check the post before we quote the opener.
- Caliche making a simple post dig miserable. Sunrise Manor yards have some of the hardest caliche in the valley. It’s cement-like, and it defeats rental augers. Our crew brings the right equipment and knows how deep to go for a footing that won’t heave with the seasons.
Pricing for Gate Repair in Sunrise Manor, NV
Here’s what we actually see on invoices in Sunrise Manor, so you can plan before you call:
- Gate opener troubleshooting and minor repair (limit switch, remote programming, capacitor): $180 – $280
- Hinge replacement or realignment on a metal gate: $250 – $500
- Post replacement, including concrete and finish work: $350 – $700
- Full gate opener replacement, including safety sensor alignment and testing: $650 – $1,400 depending on brand and horsepower
The price we quote at your door is the price on the invoice. Not a starting point. That’s a Calder non-negotiable. Estimates are free, and we encourage you to call (903) 417-0793 before a small problem becomes a full replacement.
We Also Serve Cities Near Sunrise Manor
Our crews run throughout the east valley. Along with Gate Repair in Sunrise Manor, we serve Las Vegas, Henderson, North Las Vegas, and Enterprise. If you’re on the edge of Sunrise Manor near Nellis Boulevard or the Hollywood corridor, you’re still in our service area.
Serving Sunrise Manor, NV - Our Local Coverage Area
We’re based in the Sunrise Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunrise Manor
Nine times out of ten, the safety photocell has been knocked out of alignment or was never installed correctly – landscaping work and wind are the usual culprits in Sunrise Manor. The opener reads the misaligned beam as an obstruction and reverses. We realign the sensor, clean the lenses, and test the full reversal cycle. If the sensor is missing entirely, we install a compliant one and verify it meets UL 325. Call (903) 417-0793 and we’ll get it sorted.
Once a year is the right interval for most Sunrise Manor gates, especially given the dust and temperature swings here. An annual service includes cleaning the track, lubricating hinges, checking post tightness, testing safety edges and photocells, and inspecting the gearbox for wear. Operators on original 1950s wiring or solar setups may need a check every six months. A service visit costs less than a failed opener motor, every time.
Yes, and it’s one of our most common wood gate repairs in Sunrise Manor. The fix usually involves resetting or replacing the hinge post, upgrading to heavy-duty hinges with longer screws, and re-aligning the frame so the gate closes square. If the post is rotted, we pull it, dig a deeper footing with gravel drainage, and set a pressure-treated replacement. Expect $220 – $450 for the typical repair.
We’re factory-familiar with nine brands, and in Sunrise Manor we most often work on Linear, Viking, Ghost Controls, and DoorKing. Our technicians know the control board layouts, limit switch calibrations, and remote programming for each. We stock common parts for these brands locally, which means faster turnaround on repairs. If you own a brand not on that list, call anyway – we’ll tell you honestly whether we can help.
Yes, for most repair and emergency calls. If your gate is stuck open, stuck closed, or reversing dangerously, call (903) 417-0793 and we’ll get a technician to your Sunrise Manor address the same day in most cases. Installations and new operator work are scheduled in advance – that work involves measurement, ordering, and proper testing, so we won’t rush it. For repairs, though, same-day is the standard, not the exception.
If your gate is acting up anywhere in Sunrise Manor, call Calder Gate Repair at (903) 417-0793. You’ll get a live person, a written price, and a repair that’s covered by the 365-Day Done Right Promise. Nico Alvarez runs our crew, and every job gets the same standard: real arrival time, real price up front, and a gate that works when we leave.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Sunrise Manor as part of the Relay Home Co. family since 2009.





Before
After
Before
After
Before
After