Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hillsborough, CA
Gate repair in Hillsborough, CA runs $180 – $340 for most opener fixes and $220 – $520 for motor replacements, with same-week scheduling as the norm for this area. Hillsborough is different from the rest of the Bay Area because the lots are large, the driveways are long, and the gates themselves tend to be heavy, custom steel or wrought iron set into stone or brick pillars. Calder Gate Repair works on all of it, with a written price before any work starts. Call (903) 417-0793 and a live person picks up, any hour.
Why Hillsborough Homes Are Different
Hillsborough sits on the San Francisco Peninsula, where marine fog rolls through the hills at night and summer days swing hot and cool within the same afternoon. That moisture cycle is hard on gate hardware: hinges and opener arms surface-rust faster than they do in drier inland towns, and the temperature swings make limit switches drift out of adjustment more often. A gate that worked fine in June can start reversing mid-cycle by September because the metal has expanded and contracted enough to shift the travel settings.
The housing stock compounds it. Most Hillsborough properties are estate-scale homes built between the 1920s and the 1990s, which means we routinely see gates that are older than the openers bolted to them. A 1970s wrought iron gate on a 2020 LiftMaster opener is a common pairing, and it usually means the opener was undersized for the gate’s actual weight. Hillsborough also has some of the strictest setback and fence-height standards on the Peninsula, and several neighborhoods fall under hillside development rules that limit what can be altered without a permit. If your gate faces a public right-of-way, we can usually repair the existing hardware without triggering anything; if the post or footing is compromised, the town may want a structural check before we proceed.
The terrain matters too. Driveways in the lower flats near Burlingame border are reasonably level, but once you climb toward the western hills, a gate on a slope puts constant stress on the opener’s gearbox. We see more stripped gears and burned-out capacitors in the upper hills than anywhere else on the route. Short version: Hillsborough gates are heavier, older, wetter, and hillier than the regional average, and a generic fix that works in a flat San Mateo condo complex won’t hold up here.
Nico Alvarez, who leads Calder Gate Repair, sends techs into Hillsborough who already know this before they pull up. That’s the point of being a specialist rather than a generalist: the job gets diagnosed right the first time, not on the third visit.
Our Main Hillsborough Services
Three services cover nearly every call we take from Hillsborough residents: mechanical gate repair, electric gate repair, and gate opener repair. Each has its own page with full pricing and detail.
Gate Repair in Hillsborough
Mechanical gate repair is the hardware side of the job: hinges, wheels, track, chains, the physical gate itself. In Hillsborough that often means a sliding gate that’s jumped its track on a sloped driveway, a sagging double-leaf swing gate with a hinge that’s pulling loose from a brick column, or a cantilever gate that’s been hit by a delivery truck and no longer rolls true. We quote the repair in writing before any work starts, and the 365-Day Done Right Promise applies: if the repair fails within a year, Calder returns at no charge. Full detail on Gate Repair in Hillsborough.
Electric Gate Repair in Hillsborough
Electric gate repair covers everything with current running through it: wiring, keypads, safety sensors, photo eyes, and the control board inside the box. Hillsborough’s morning fog gets into connector housings and causes intermittent faults that are hard to reproduce, which is exactly the kind of problem a general electrician will chase for hours without solving. We trace the circuit, find the corrosion point, and replace the connector or the board. Straight answer and a written price before anything is ordered. See Electric Gate Repair in Hillsborough.
Gate Opener Repair in Hillsborough
Gate opener repair is the motor-and-drive side: the arm, the gearbox, the limit switch, the receiver board. This is our most-requested Hillsborough service because a heavy gate on a long driveway works the opener hard, and when the opener fails, the gate usually fails in the closed position, which traps cars. We carry parts for Viking, Ghost Controls, DoorKing, and Elite openers on the truck most days, so a single visit often ends with the gate working again. Details at Gate Opener Repair in Hillsborough.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hillsborough
We’re factory-familiar with nine major opener brands, and on a typical Hillsborough route we see a lot of Viking swing arms, Ghost Controls and Mighty Mule kits on rear estate gates, and DoorKing and Elite units on front entries. Common boards, remote receivers, and limit switches are stocked on the truck, which shortens most repairs to one visit. Full brand list on our brands page.
Pricing for Gate Company in Hillsborough, CA
| Service | Typical range in Hillsborough |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Gate opener motor replacement | $220 – $520 |
| Electric gate wiring repair | $140 – $300 |
| Gate hinge replacement | $120 – $280 per hinge |
| Gate wheel or roller replacement | $90 – $220 per wheel |
| Control board replacement | $200 – $450 |
| Safety sensor or photo eye repair | $110 – $240 |
| Keypad and intercom repair | $100 – $260 |
What pushes Hillsborough pricing toward the upper end: heavier custom gates that need larger motors, driveway slopes that force the opener to work harder, and older estate gates where the original hardware is no longer made and we need to machine or adapt a replacement. Every job gets a written price before any work starts. The number on the invoice is the number agreed to at the door.
Neighborhoods We Serve in Hillsborough
We cover the entire town of Hillsborough, from the flats near Burlingame to the steeper streets in the western hills. Response is typically same-day or next-day for gate failures that leave a car trapped, and routine repairs are scheduled within the week.
- Lower Hillsborough, near the Burlingame border, where many mid-century ranch homes have slide gates on level lots
- The western hillsides, where sloped driveways and heavier gates put real strain on openers
- The estates around Carolands and the château district, where gate weight and custom hardware are the norm
- The streets running off Chateau Drive and Hayne Road, including long private lanes with rear service gates
- South Hillsborough, near the San Mateo line, where many properties run dual gates at front and rear
Service Area – Cities Near Hillsborough
Hillsborough is our Peninsula home base, and the same crew covers the wider Bay Area. If your property is in San Francisco, CA or down in San Jose, CA, we’ll route the nearest available tech. We also serve San Diego, CA and Los Angeles, CA for clients who have properties in both Northern and Southern California.
Serving Hillsborough, CA - Our Local Coverage Area
We’re based in the Hillsborough area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hillsborough
Same-day for a gate that’s trapping a car, and usually within 24 hours for a gate that opens but won’t close securely. Call (903) 417-0793 and a live person gives you a trackable arrival window, not a four-hour range.
Most hardware, opener, and wiring repairs don’t need a town permit regardless of what trade performs them. If a footing, post, or structural member is failing, Hillsborough’s hillside and setback rules may require a structural check first. We’ll tell you if that applies before quoting.
Yes. We regularly work properties with a front entry gate and a rear service or pool gate, often running different opener brands on the same property. A single visit covers both, and the written quote covers both before anything starts.
If your gate is acting up in Hillsborough, call Calder Gate Repair at (903) 417-0793. You’ll get a live person, a straight answer, and a written price before a single bolt is turned. That’s how it works here.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hillsborough Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.