Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kenmore, WA
Gate repair in Kenmore means dealing with wet winters, soft ground, and neighborhoods where a sagging gate is obvious from the street. Calder Gate Repair handles gate and opener problems across Kenmore, from dead openers on steep driveways to rusted hinges near Swamp Creek. Every job gets a written price before we touch a bolt, and a live person answers when you call (903) 417-0793.
Why Kenmore Homes Are Different
Kenmore sits at the north end of Lake Washington, and that geography shapes gate work in ways you don’t see inland. Moisture off the lake and creek systems like Swamp Creek means gate tracks, hinges, and opener circuit boards take more weather than they would five miles east. We regularly open Kenmore control boxes to find corrosion on limit-switch contacts – the little sensors that tell your gate when to stop – from months of damp air working through worn seals. It’s not a failure of the opener brand. It’s a failure of the enclosure.
Terrain matters too. Kenmore has plenty of sloped lots, especially east of 68th Ave NE toward Arrowhead and up into the hills bordering Bothell. A gate on a slope puts extra load on the motor and makes a soft-start opener worth every dollar. Many Kenmore neighborhoods also have HOA guidelines about gate style and color, so before a full replacement we check what the association requires. Housing here ranges from 1970s split-levels to newer builds up the hill, and gate hardware ages right along with the house itself.
Our Main Kenmore Services
Most calls from Kenmore homeowners fall into three buckets: a gate that won’t move, an opener that hums but does nothing, or a gate that closes halfway and reverses. Each has its own dedicated Kenmore page below.
Gate Repair in Kenmore
A gate that drags on the ground or swings loose at the post is a repair we handle constantly in Kenmore, where soft, wet soil lets post footings shift over time. We check the hinge alignment, level the gate back to true, and replace worn hardware before it takes out the opener. On sloped driveways we often add a heavier-duty hinge set than the original install used. For full details on what’s involved and what it typically costs, see Gate Repair in Kenmore.
Electric Gate Repair in Kenmore
Electric gate issues in Kenmore usually stem from a dead capacitor, a failed safety photo-eye, or corrosion inside the control board housing – moisture being the common thread. We diagnose the entire circuit, not just the symptom, because a gate that trips its breaker repeatedly often points to a wiring fault underground rather than a bad motor. See Electric Gate Repair in Kenmore for the full picture.
Gate Opener Repair in Kenmore
Opener failures in Kenmore follow a pattern: the motor runs fine, but the gate won’t budge, or the remote stops working while the keypad still functions. That split usually localizes the problem to a receiver board or limit switch rather than the motor itself. We stock common receiver boards and limit switches for brands like LiftMaster, Linear, and Ghost Controls so we’re not waiting on a parts truck. Gate Opener Repair in Kenmore covers what we check first and typical repair costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kenmore
We repair and service openers from Linear, Viking, Ghost Controls, and DoorKing, among others. Common receiver boards, limit switches, and remotes for these brands are stocked with our local crews, which cuts turnaround time when a Kenmore gate is stuck open or dead in the driveway. See our brands for the full compatibility list.
Pricing for Gate Company in Kenmore, WA
| Service | Typical range in Kenmore |
|---|---|
| Gate opener repair (labor only, before parts) | $180 – $340 |
| Circuit board replacement | $225 – $490 |
| Gate opener replacement (full system) | $575 – $1,500 |
| Hinge replacement (per hinge) | $150 – $325 |
| Gate track or roller replacement | $250 – $550 |
| Limit switch replacement | $180 – $300 |
| Photo-eye (safety sensor) replacement | $150 – $300 |
| Service call / diagnostic visit | $75 – $125 |
Moisture-damaged control boards and sloped-driveway motor strain are the two big price drivers in Kenmore, and both are things we identify on the diagnostic visit before quoting. Whatever the number, it’s written down and agreed to before any work starts – if the invoice doesn’t match what we quoted at the door, that’s our problem, not yours.
Neighborhoods We Serve in Kenmore
We work across all of Kenmore, including the older subdivisions near the lake and the newer builds up the hill. Typical response time for a gate emergency is same-day for opener failures, with scheduled repair visits usually within 24 to 48 hours depending on parts.
- Arrowhead
- Kenlake / Northlake Terrace
- Uplake
- Linwood Heights
- Kenmore East / Inglemoor
Service Area – Cities Near Kenmore
Besides Kenmore, our crews cover Bothell, WA to the northeast, Mountlake Terrace, WA and Lynnwood, WA to the north, and Woodinville, WA to the east. Dispatch and scheduling are coordinated from the brand’s Seattle office, with crews serving Kenmore locally.
Serving Kenmore, WA - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kenmore
Same-day response is available for a gate stuck open or an opener that has failed completely. We run scheduled repair visits across Kenmore daily, so a non-emergency call placed before noon usually books within 24 to 48 hours. The dispatcher gives you a live arrival window you can track from your phone.
Many Kenmore neighborhoods with HOAs require design review for gate style, color, or height changes. Repairs to existing hardware don’t need approval in most communities. We’ll tell you what’s likely to trigger review before you commit to a replacement, so there are no surprises with your association.
We’ll locate and diagnose it on site. Underground wiring faults around Kenmore, especially near creek corridors and wet soil zones, show up as intermittent opener failures or repeated breaker trips. The written quote covers excavation, splice, or rerun work before we dig, so the price stays the price.
Call (903) 417-0793 for gate repair in Kenmore. You’ll get a real person, a written price, and a straight answer about when we’ll be there.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kenmore Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.