Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lomita, CA
Gate repair in Lomita comes down to two things: salt air and 1950s-era steel. Most homes here were built between the late 1940s and early 1960s, and a lot of the original driveway gates we see still run on that same hardware philosophy: heavy, welded, and not forgiving. Lomita’s coastal humidity means rust moves faster than it does ten miles inland, and hinges that look fine from the street are often quietly grinding themselves apart. We’re Calder Gate Repair, the dedicated gate specialist inside the Relay Home Co. family. If your gate groans, drags, or just won’t open, call us at (903) 417-0793 and we’ll give you a straight answer and a written price.
Why Lomita Homes Are Different
Lomita sits on a strip of land between the 405 and the Palos Verdes Peninsula, close enough to the coast that marine air rolls in most afternoons. That salt air is the single biggest factor in how gates age here. We regularly open control boxes in Lomita and find corroded terminal strips on gate openers that are only four or five years old. The other thing that sets Lomita apart is lot shape. Many homes, especially north of Lomita Boulevard and around Walnut Street, have long, narrow driveways. That means gates open onto a sloped or angled approach more often than not, which puts extra strain on hinges and opener arms. If the gate post was set in the original 1950s concrete, it may not be as plumb as it looks. We account for that on every repair, because leveling a gate against a leaning post is the difference between a fix that lasts and a fix that just survived the walk to the truck. Some Lomita neighborhoods also have HOA or covenant rules about gate color and height, so if you’re replacing hardware or repainting, we’ll work with what your association requires.
Our Main Lomita Services
Lomita homeowners call us most about three things: a gate that won’t move, an electric gate system that stops halfway, and the opener that drives the whole thing. Here’s what each one involves.
Gate Repair in Lomita
This is the mechanical side of the problem: the gate itself has failed, not necessarily the motor. In Lomita, that usually means rusted hinges, a sagging frame from decades of coastal moisture, a bent track on a sliding gate, or a wheel that’s collapsed on the concrete runner. We start by finding the mechanical fault, not by selling you a new gate. Most repairs are completed the same day with parts we carry on the truck. If your gate drags, swings unevenly, or leans at the latch, read more on our Gate Repair in Lomita page.
Electric Gate Repair in Lomita
When the gate is mechanical but the system is electric, you’re dealing with photo eyes, safety loops, keypads, wiring, and the control board. Lomita’s salt air is brutal on exposed low-voltage connections, and we frequently find green corrosion on terminals inside what look like sealed junction boxes. Electric gate work should never be a guess-and-swap job. We trace the circuit, find the fault, and quote you a repair before touching a wire. We also check safety edges and obstruction sensors, because an electric gate that doesn’t stop when it meets resistance is dangerous. For the full scope, see Electric Gate Repair in Lomita.
Gate Opener Repair in Lomita
The opener is the motor and its control logic: the arm, the gearbox, the limit switches, the receiver that talks to your remote. In Lomita, the most common opener failure we see is a stripped plastic drive gear inside the motor housing, often on a unit that’s between seven and twelve years old. Limit switches, the small sensors that tell the gate when to stop, also drift out of adjustment as the gate settles on an uneven pad. We repair all of it, and we carry parts for the brands you’re most likely to own. For a deeper look at symptoms and repair costs, visit Gate Opener Repair in Lomita.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lomita
We’re factory-familiar with nine major opener brands, and in Lomita we most often repair Viking, Ghost Controls, DoorKing, and Elite units. Our techs stock common control boards, remotes, photo eyes, and limit switches for these brands locally, so many repairs are completed on the first visit. See the full list on our brands page.
Pricing for Gate Company in Lomita, CA
| Service | Typical range in Lomita |
|---|---|
| Gate opener repair (labor only) | $180 – $340 |
| Electric gate repair (diagnostic + labor) | $200 – $450 |
| Hinge replacement (single gate) | $150 – $400 |
| Sliding gate wheel replacement | $120 – $300 |
| Control board replacement | $250 – $650 |
| Photo eye replacement / alignment | $95 – $200 |
| Limit switch adjustment or replacement | $90 – $180 |
| Remote / keypad programming | $60 – $140 |
| Full diagnostic visit (applied to repair) | $75 – $120 |
Prices in Lomita run toward the upper end of these ranges when rust has compromised the mounting hardware or when an older gate needs realignment before the new part will seat properly. Every quote is written down and agreed to before we start. The number we give you is the number you pay, and every repair carries the 365-Day Done Right Promise: if it fails within a year, we return at no charge.
Neighborhoods We Serve in Lomita
We cover the entire City of Lomita, from the flats near the 110 to the hillier pockets that climb toward Palos Verdes Drive North. Most Lomita calls are answered inside two hours, and our live dispatchers give you a trackable arrival time, not a four-hour window.
- Lomita Terrace
- Delaware Park area
- Lomita Gardens
- North Lomita (near Walnut Street)
- South of Lomita Boulevard
Service Area – Cities Near Lomita
While our Lomita crews focus on this city, we also run jobs through Torrance, CA, Carson, CA, and Rancho Palos Verdes, CA. We schedule one of those from the same dispatch line, and our booking system gives you the same live arrival time and written price. We also cover Lakewood, WA for clients with property in the Pacific Northwest.
Serving Lomita, CA - Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lomita
Most Lomita calls get a technician on site within two hours for repair work, and our dispatchers give you a live, trackable arrival time rather than a vague window. If your gate is stuck open or won’t open at all, call (903) 417-0793 and we’ll tell you over the phone who’s coming and when.
Most repairs, hinge replacements, and opener swaps don’t require a permit in Lomita. If you’re replacing the entire gate or moving a post on a property with HOA oversight, your association may require approval first, and we’ll help you understand what’s needed before any work starts.
Yes. Several Lomita neighborhoods have covenants that cover gate height, color, and even opener type. We’ll repair what you have without running afoul of your HOA, and if a replacement is needed, we’ll quote the work to match your association’s written rules. Estimates are free across Lomita.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lomita Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.