Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Manhattan Beach, CA
Calder Gate Repair is a gate company in Manhattan Beach, CA that gets called for everything from a stuck iron driveway gate to an opener that’s lost its mind after a fog roll-in. Manhattan Beach gates sit a few blocks from salt air, on lots where hills and compact spaces make every track and hinge run just a little differently than it would inland. We work on all of it, and every job starts with a written price before we touch a bolt. The three services Manhattan Beach homeowners call us about most are gate repair, electric gate repair, and gate opener repair, and each one has its own dedicated Manhattan Beach page linked below. For anything urgent, call (903) 417-0793, a live person picks up.
Why Manhattan Beach Homes Are Different
Manhattan Beach gates get a particular kind of workout. Most are on hillside lots where driveways climb steeply, which means gates sit at an angle and constantly pull against their own weight if a post shifts even a fraction of an inch. Ocean-facing properties in the Hill Section and the Tree Section deal with marine air that accelerates rust and corrosion on exposed metal. Powder-coated steel holds up, but uncoated hinges, chain drives, and limit switches, the small sensors that tell the gate where to stop, start to degrade faster than they would a few miles inland.
Housing stock here splits roughly three ways: 1950s and 60s originals, 80s and 90s rebuilds, and a steady run of modern replacements with heavy automated gates and intercom systems. That means one block can hold a simple swing gate from the Nixon era and a full steel slide gate with vehicle sensors from the current decade. Each one has different parts, different wiring, and different failure modes. Hill Section lots have narrow access on the uphill side of the street, so positioning a service vehicle and wrestling a 400-pound gate off its track takes care and patience. The Tree Section deals with tree roots that heave concrete pads just enough to knock a gate out of square.
Our Main Manhattan Beach Services
These are the three gate jobs we handle most often in Manhattan Beach. Each has its own full page, with pricing, timelines, and the specific way we approach that repair in this city:
Gate Repair in Manhattan Beach
Most gate repair in Manhattan Beach starts with a physical problem: a gate that’s dropped, scraping the driveway, not latching, or swung so far off alignment it won’t close at all. We work on wrought iron, steel, aluminum, and wood gates. The fix in this city usually involves resetting hinges, shimming or replacing posts, rebuilding a section, or straightening a bent frame. One Manhattan Beach-specific factor is slope: many gates are mounted on an incline, so “straight” has to be measured against the driveway, not the horizon. Call (903) 417-0793 for a free estimate. Read the full detail on Gate Repair in Manhattan Beach.
Electric Gate Repair in Manhattan Beach
Electric gate repair in Manhattan Beach usually falls into electrical or mechanical categories: a motor that’s worn out, a board that’s fried by a power surge, a safety sensor that’s failed, or a mechanical arm that’s jammed with sand and grit from ocean wind. Modern electric gates have a bundle of components working together, photo eyes, keypads, safety edges, and the control board, and one failed piece can stop the whole system. In Manhattan Beach we see more than the usual number of connection failures because salt air accelerates corrosion at terminal blocks and wire junctions. Call us for a written quote. Full details are on the Electric Gate Repair in Manhattan Beach page.
Gate Opener Repair in Manhattan Beach
Gate opener repair in Manhattan Beach covers the motor, the arm, and the electronics that drive them: the limit switches, the board, the receiver, and the remote controls. When an opener is making a grinding sound, opening partway and reversing, or ignoring remotes entirely, that’s opener failure. In Manhattan Beach we see a lot of plastic gears on older openers cracking in place from years of flexing against gate posts that have shifted slightly on hillside lots. Whether the unit is salvageable or needs replacing, you’ll get a written price first. Call (903) 417-0793. The detailed breakdown lives on the Gate Opener Repair in Manhattan Beach page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Manhattan Beach
We’re factory-familiar with FAAC, BFT, Linear, and Viking, and we keep the most common parts and boards for those openers in our local trucks, so a Manhattan Beach repair doesn’t stall waiting on freight. If your opener is one of our brands, we can usually diagnose and fix it in one visit.
Pricing for Gate Company in Manhattan Beach, CA
| Service | Typical range in Manhattan Beach |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Weld repair for steel or iron gates | $150 – $400 |
| Replacement sensor or safety edge | $120 – $280 installed |
| Realignment of a dropped or dragging gate | $180 – $350 |
| Full operator replacement (motor and arm) | $950 – $2,100 |
| New remote or keypad programming | $75 – $175 |
| Control board replacement | $250 – $600 installed |
| Post repair or concrete reset | $200 – $600 |
| New gate installation | $1,800 – $6,500 |
In Manhattan Beach the two biggest price drivers are terrain and access. A gate on a hillside lot where the crew has to work from a slope, or a post that requires concrete demolition and resetting, pushes a job toward the upper end of the range. Salt-air corrosion can also expand a repair’s scope, because a hinge that looked fine from the outside may be too far gone to reuse once the gate is off. Whatever the number lands on, it’s written down and agreed to before the first bolt is turned. The invoice matches the quote. That’s not a perk, it’s the rule.
Neighborhoods We Serve in Manhattan Beach
We cover the whole city, from the ocean slope up to the freeway side. Our normal response window in Manhattan Beach is same-day for opener failures and a scheduled slot within 24 to 48 hours for non-urgent work like a gate that’s out of alignment but still closing. Crests, canyons, and tight alley access don’t phase us; the vans are stocked and the techs know the streets.
- The Hill Section
- The Tree Section
- The Sand Section
- Miracle Mile
- Manhattan Village area
Service Area – Cities Near Manhattan Beach
If you’re in a neighboring beach city or a mile or two inland, Calder Gate Repair covers those service areas too. We run the same printed price promise and 365-Day Done Right Promise in Hermosa Beach, CA, El Segundo, CA, Lawndale, CA, and Hawthorne, CA. Same live-answer phone, same written quote before work starts.
Serving Manhattan Beach, CA - Our Local Coverage Area
We’re based in the Manhattan Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Manhattan Beach
Same day in most cases. A failed opener or a gate stuck open on a Manhattan Beach street is a security problem as much as a convenience problem, so we prioritize it as an emergency dispatch. Call (903) 417-0793 and a live person will book a time window with a real, trackable arrival.
Sometimes. Manhattan Beach has hillside overlay rules and many homes sit in HOAs with standards about gate height, color, and style. For repair of an existing gate, permits are rarely required. For full replacement or a significant change, your HOA may want to see drawings first. We’ll flag that during the estimate and work with whatever your association requires.
All of it, from the Sand Section up through the Hill Section and across the Tree Section to the east side. No extra charge for distance inside the city. If your gate is in Manhattan Beach, the price is the price and the arrival window is real.
For any gate problem in Manhattan Beach, CA, call Calder Gate Repair at (903) 417-0793. You’ll get a live person, a straight answer, and a free written estimate before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Manhattan Beach Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R.