Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Moraga, CA
Calder Gate Repair is the Moraga gate company homeowners call when a driveway gate won’t open, a keypad stops responding, or an opener motor grinds but nothing moves. Most Moraga jobs involve hillside lots, long driveways, and older gate systems that have weathered a few wet winters. We’re part of the Relay Home Co. family, established 2009, and we work on nine major opener brands. Every job starts with a written price before anything is touched. Call (903) 417-0793 and a live person answers, day or night.
Why Moraga Homes Are Different
Moraga sits in a valley where winter fog rolls through and summer temperatures push into the 90s. That swing is hard on gate hardware. We regularly replace capacitor and limit switch failures that trace back to moisture working into the control board housing. The limit switch, by the way, is the small sensor that tells the gate when to stop. When it fails, the gate either slams at the end of travel or refuses to close all the way.
Housing here tilts toward single-family homes built between the 1960s and 1990s, many on sloped lots along Camino Pablo, Rheem Boulevard, and Moraga Way. Driveway gates on grades put real strain on hinges and opener arms. We also see a fair number of double swing gates at the bottom of steep drive approaches, where one leaf settles and drags against the asphalt. HOA communities like Sanders Ranch and Moraga Country Club often require gates that stay within their original footprint, which matters when a homeowner asks about widening or automating an existing gate. Crews coordinate through our San Francisco Bay Area office and serve Moraga locally.
Our Main Moraga Services
These are the three jobs Moraga homeowners call about most, and each has its own detailed Moraga page with pricing, timelines, and brand coverage.
Gate Repair in Moraga
Gate repair covers the physical structure: sagging gates, bent hinge posts, wheels that jump the track, latch hardware that no longer catches, and gates that drag when the ground settles after rain. Moraga’s clay soil expands and contracts seasonally, which shifts concrete pillars just enough to throw a gate out of plumb. We straighten, reinforce, re-hang, and weld where needed, then confirm the gate travels cleanly. Full details are on the Gate Repair in Moraga page.

Electric Gate Repair in Moraga
Electric gate repair is about power and control: motors, wiring, photocells, keypads, and the low-voltage lines that feed them. Hillside lots in Moraga often mean longer conductor runs from the house panel to the gate, and older installations sometimes used undersized wire. Voltage drop at the motor is a common root cause. We trace circuits, replace what’s failed, and set the safety edges and obstruction sensitivity correctly. Details are on the Electric Gate Repair in Moraga page.

Gate Opener Repair in Moraga
Opener repair focuses on the mechanical drive unit and its controls: stripped gears, dead receiver boards, burned transformers, and limit switches that have drifted. We see a mix of LiftMaster, FAAC, and DoorKing units around Moraga, often from original 1990s installs that are worth repairing rather than replacing. When the arm still moves but the gate doesn’t, the problem is usually in the drive mechanism. Specifics are on the Gate Opener Repair in Moraga page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Moraga
Our techs are factory-familiar with Viking, Ghost Controls, DoorKing, and Elite systems, among the nine major brands we carry parts for. We stock common replacement boards, remotes, and safety edges locally so most Moraga opener repairs happen in a single visit, not two. See the full list on our brands page.
Pricing for Gate Company in Moraga, CA
| Service | Typical range in Moraga |
|---|---|
| Diagnostic service call (applied to repair) | $60 |
| Gate opener repair (labor only, before parts) | $180 – $340 |
| Electric gate repair (labor only, before parts) | $195 – $400 |
| Gate repair, general (labor only, before parts) | $160 – $360 |
| Limit switch replacement | $120 – $220 |
| Capacitor replacement | $110 – $200 |
| Circuit board diagnostics and replacement | $240 – $480 |
| Remote and keypad programming | $90 – $160 |
| Safety sensor or photo eye replacement | $130 – $250 |
| Gate adjustment and track alignment | $120 – $260 |
What pushes a Moraga quote toward the top of these ranges is usually terrain. Gates set into a hillside or sitting on a long concrete pad with settled sections take more labor to get right. Corroded hardware from wet winters adds time too. Whatever the job needs, we put the number in writing before we turn a wrench. The price on the invoice is the price agreed at the door, never a surprise.
Neighborhoods We Serve in Moraga
We run calls across all of Moraga, including the unincorporated edges where driveways get longer and gate systems get older. Typical response is same day or next morning, depending on when you call and how far up the hill you are.
- Camino Pablo corridor
- Rheem Boulevard and Rheem Valley
- Moraga Country Club and Sanders Ranch
- Moraga Way and Canyon Road approaches
- Campolindo and Donald area
Service Area – Cities Near Moraga
Beyond Moraga, we regularly send crews to Orinda, CA, Walnut Creek, CA, Lafayette, CA, and Alamo, CA. If you’re on the edge of town or your gate sits near a city line, call and we’ll confirm coverage before you book.
Serving Moraga, CA - Our Local Coverage Area
We’re based in the Moraga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Moraga
We answer every call live, 24/7, and typically reach Moraga homes the same day or the next morning. Emergency calls come first, and every technician dispatch comes with a live, trackable arrival time, not a four-hour window. Call (903) 417-0793 to get a real ETA for your street.
Some communities, including Sanders Ranch and Moraga Country Club, ask homeowners to keep the original gate footprint and finish. Like-for-like repairs rarely need anything. If you’re changing the gate style or adding automation, check your HOA packet first. We’ll work within whatever the association requires.
Yes. Every Calder job includes a written price before any work begins. The diagnostic fee is credited toward the repair, and the number you approve is the number on the invoice. No add-ons, no “while we’re out there” surprises. Call (903) 417-0793 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Moraga Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.





Before
After
Before
After
Before
After