Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Mountain View, CA
Gate repair in Mountain View means working on homes that run the gamut from 1950s ranchers in Rex Manor to newer builds near North Bayshore, all sharing one thing: gates that take a beating from bay weather and daily tech-worker commutes. Calder Gate Repair is the gate company Mountain View homeowners call when a gate stops latching, starts grinding, or refuses to open at 6:40 a.m. We answer the phone with a live person around the clock, and we quote every job in writing before any work begins. Call (903) 417-0793 for a free estimate.
Why Mountain View Homes Are Different
Mountain View’s climate does two things to gates year-round. The marine layer off the bay keeps steel and iron damp through summer mornings, which accelerates rust on hinges and track hardware. Then the dry inland heat of August and September bakes the same metal, causing wood gates to warp and pull away from their frames. We see more hinge and alignment work in Mountain View than almost anywhere else on the Peninsula.
The housing stock matters too. Older neighborhoods like Monta Loma and Blossom Valley have narrow driveways with gates set close to the street, so clearance and swing radius are always tight. Newer developments along North Whisman and around Shoreline lean toward aluminum and steel drive gates with electric openers, which means the work shifts to limit switches, circuit boards, and receiver modules. HOAs are common in Mountain View’s planned communities, and several have written rules about gate height, finish, and even opener noise. We can work with those specs, and we always keep the before-and-after photo trail for property managers who need documentation.
Mountain View sits on flat valley floor for the most part, so slope-related gate issues are rare. What we do see is soil settlement. Drive gate posts in areas with expansive clay soil can drift half an inch out of plumb over a few years, which throws off the opener’s travel and strips gears. A plumb post is step one before any opener diagnostic.
Our Main Mountain View Services
Most Mountain View calls fall into one of two buckets: a gate that physically won’t move or stay aligned, and an opener that stopped responding. Here’s how we handle both, plus the opener work that ties them together.
Gate Repair in Mountain View
This is the physical side: hinges, wheels, track alignment, sagging or dragging gates, broken welds, and posts that have shifted. In Mountain View, rust from bay moisture is the usual culprit on steel gates, while wood gates tend to swell and stick after winter rains. We replace worn hardware, re-hang gates so they swing true, and match finishes where it matters. Every repair is quoted in writing before work starts. Gate Repair in Mountain View covers what the job includes and what it typically costs.
Electric Gate Repair in Mountain View
Electric gates add wiring, control boards, keypads, and often vehicle detection loops. Mountain View’s older neighborhoods have plenty of retrofit electric gates wired by previous owners, and the splices buried under flower beds don’t always age well. We test, trace, and replace what’s failed rather than guessing. Grid power, battery backup, solar assist, safety edges, and photo eyes all fall under this umbrella. See Electric Gate Repair in Mountain View for the detailed breakdown.
Gate Opener Repair in Mountain View
When the opener itself is the problem, the fix usually comes down to a gear, a limit switch, a capacitor, or a board. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. Mountain View’s marine layer isn’t kind to exterior control boards in open-top enclosures, so we check for corrosion even when the fault looks mechanical. The opener page is Gate Opener Repair in Mountain View, and it lists symptoms and prices by brand where possible.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mountain View
We’re factory-familiar with nine major gate opener brands, and we stock common parts for Linear, Viking, Ghost Controls, and DoorKing units in our local service vehicles. That means many Mountain View calls are one-trip fixes: we diagnose on arrival, pull the part, and finish the same visit. Visit our brands page for the full lineup and what fails most often on each.
Pricing for Gate Company in Mountain View, CA
| Service | Typical range in Mountain View |
|---|---|
| Gate repair diagnostic and minor adjustment | $89 – $189 |
| Hinge replacement (standard steel or wood gate) | $120 – $240 per hinge |
| Gate wheel or roller replacement | $85 – $175 per wheel |
| Track alignment and re-hang | $150 – $325 |
| Wood gate re-hang after warping | $180 – $350 |
| Electric gate diagnostic and repair (labor only) | $130 – $280 |
| Gate opener repair (labor only, parts extra) | $160 – $340 |
| Limit switch replacement | $110 – $210 |
| Control board replacement | $220 – $450 plus part |
| Keypad or receiver replacement | $140 – $290 |
| Full gate opener replacement (labor only) | $350 – $700 |
Rust remediation on salt-air-exposed hardware and out-of-plumb post correction are the two things that most often push a Mountain View job toward the top of these ranges. Parts are priced separately and confirmed with you before we install anything. Every quote is written and agreed before any work starts, and the price on the invoice is the price you approved at the door.
Neighborhoods We Serve in Mountain View
We run calls across all of Mountain View, from the older streets of Rex Manor and Monta Loma to Blossom Valley, North Whisman, and the neighborhoods around Shoreline. Most of our Mountain View service area gets a same-day or next-day visit, with a live, trackable arrival time sent before we head over.
- Rex Manor
- Monta Loma
- Blossom Valley
- North Whisman
- Shoreline area
Service Area – Cities Near Mountain View
If you’re just outside Mountain View, we likely cover your area too. We regularly serve Los Altos, CA to the north, Stanford, CA nearby, Cupertino, CA to the south, and Sunnyvale, TX for our Texas coverage map. Call us and we’ll confirm scheduling for your street.
Serving Mountain View, CA - Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mountain View
Most Mountain View calls are same-day or next-day, and we send a live, trackable arrival time before the technician heads over. If your gate is stuck open and the property is unsecured, tell the dispatcher and we’ll prioritize it. Call (903) 417-0793 and a real person picks up.
Some Mountain View HOAs require written approval for gate replacement, color changes, or opener swaps. If you have an HOA, we recommend checking your CC&Rs before scheduling replacement work. For repair and maintenance, most HOAs don’t require pre-approval, and we can provide photos and a written invoice for any required documentation.
We service nine major brands and keep common parts for Linear, Viking, Ghost Controls, and DoorKing on hand, but for older or discontinued boards we can often source the part within a few days. We’ll tell you upfront whether it’s a one-trip fix or a parts-order situation, and the quote is written either way. Call (903) 417-0793 and describe what you have.
Need a gate fixed in Mountain View? Call Calder Gate Repair at (903) 417-0793 for a free estimate, a written price before any work starts, and the 365-Day Done Right Promise on every repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mountain View Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.