Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Parkway, CA
Calder Gate Repair is the gate company Parkway homeowners call when a gate stops opening, starts grinding, or simply refuses to close. Most gate repairs in Parkway run between $180 and $340 before parts, and we get a technician to you fast because we know a stuck gate is a security problem, not just an inconvenience. Whether it’s a worn pivot hinge, a fried control board, or a misaligned photo eye, you’ll get a written price before any work starts. Call (903) 417-0793 and a live person answers 24/7.
Why Parkway Homes Are Different
Parkway sits in the flat, sunny southern part of Sacramento County, which means gate hardware here takes a specific kind of beating. Summer heat runs long and dry, so nylon rollers get brittle, powder coating fades, and control board solder joints crack from repeated thermal expansion. We see fewer rust-through failures than coastal towns, but far more electronics drift: limit switches lose calibration in July, and solar gate batteries cook off under direct sun. If your gate faces an unshaded south or west exposure, expect the opener’s transformer to age faster than the manufacturer’s spec sheet suggests.
Housing stock in Parkway is mostly single-family detached homes on generous lots, many built between the 1980s and early 2000s. That means a mix of original builder-grade swing gates and newer homeowner-installed slide gates, frequently running on LiftMaster, FAAC, or Mighty Mule openers. Some properties back up to open fields and levees, so wind loads push gates past their rated duty cycles. We factor these conditions into every repair because a gate that worked fine in another part of the county often needs different parts or settings here in Parkway.
Our Main Parkway Services
Three services cover nearly every call we take in Parkway: full gate repair, electric gate repair, and gate opener repair. Each has its own dedicated Parkway page below with local pricing, brand notes, and what a same-day fix actually looks like.
Gate Repair in Parkway
A sagging or dragging gate in Parkway usually traces back to failing hinge hardware or a post that’s shifted in sandy soil. We weld, shim, replace wheels, and re-hang gates to clear correctly, then test full open and close cycles under load. Parkway’s flat terrain means drainage around the gate track matters, and pooled winter rain can undermine post footings over time. Gate Repair in Parkway covers full pricing and what the first visit includes.
Electric Gate Repair in Parkway
Electric gates in Parkway run on low-voltage wiring, and the weak points are almost always the same: keypad wiring corroded at the junction, a photo eye knocked out of alignment by a passing mower, or an actuator limit switch that no longer tells the gate when to stop. We trace circuits, replace sensors, and re-terminate connections so the gate stops tripping or refusing to hold. Electric Gate Repair in Parkway walks through the most common failures and repair ranges.
Gate Opener Repair in Parkway
When a Parkway gate hums but won’t move, the opener is usually the culprit, and we work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We replace stripped gears, burned control boards, and blown capacitors on the spot, then reprogram remotes and keypads before we leave. Gate Opener Repair in Parkway lists typical symptoms and costs by brand and part.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Parkway
Calder Gate Repair is factory-familiar with FAAC, BFT, Linear, and Viking, and we keep common boards, gears, and sensors stocked for fast turnaround across Parkway. Most opener repairs finish in one visit, since we carry the parts instead of ordering them and hoping for a second appointment. See our brands page for the complete nine-brand list.
Pricing for Gate Company in Parkway, CA
| Service | Typical range in Parkway |
|---|---|
| Gate repair (labor, basic) | $180 – $260 |
| Electric gate repair (diagnostic + minor component) | $240 – $340 |
| Gate opener repair (labor, basic) | $220 – $300 |
| Limit switch replacement | $160 – $260 |
| Photo eye sensor replacement | $150 – $250 |
| Keypad replacement | $150 – $240 |
| Control board replacement | $320 – $520 |
| Actuator arm replacement | $350 – $600 |
| Hinge or wheel replacement | $140 – $220 |
| Gate re-alignment | $120 – $190 |
What pushes a price up in Parkway is usually parts: a proprietary FAAC board costs more than a universal LiftMaster control, and heavy ornamental steel gates need stronger actuators than lightweight tube-frame aluminum. Whatever the number, you get it in writing before we turn a single bolt, and the invoice matches the quote.
Neighborhoods We Serve in Parkway
Calder Gate Repair covers all of Parkway, south to the edge of the county line and west toward the river. Our typical response window in Parkway is one to two hours for emergency gate failures, and we schedule standard repairs the same day in most cases.
- Parkway Estates
- South Parkway
- Parkway Foothills
- West Parkway corridor
Service Area – Cities Near Parkway
Calder Gate Repair runs Parkway routes, and we also answer calls in nearby metros across California. If you’re outside Parkway but still in the region, our nearby pages cover Los Angeles, CA, San Diego, CA, San Jose, CA, and San Francisco, CA.
Serving Parkway, CA - Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Parkway
We dispatch to Parkway within one to two hours for emergency gate failures, like a gate stuck open or a car trapped inside. Standard repairs are scheduled same-day when you call before midday. A live person answers 24/7 and can book the arrival window on the spot. Call (903) 417-0793 and we’ll tell you exactly when the tech will arrive.
If you live in a Parkway neighborhood with a homeowners association, repainting or restyling a gate may need design review, but repairing existing hardware, replacing an opener, or fixing a hinge never does. We repair what’s already there, no new construction. If you’re unsure, our tech can flag anything that looks like a style change before work begins.
Yes. Gates fail on weekends just like any other day, so we run Saturday and Sunday routes through Parkway and answer the phone around the clock. If your gate won’t close on a Sunday evening, call (903) 417-0793 and a real person will dispatch a technician, not a callback service.
For a free estimate on any gate repair in Parkway, call Calder Gate Repair at (903) 417-0793. You’ll get a written price before work begins, a 365-Day Done Right Promise on every repair, and a live arrival time you can track from your phone.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Parkway Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R.