Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Pico Rivera, CA
Calder Gate Repair is the gate company Pico Rivera homeowners call when a gate stops opening, rolls off its track, or starts making a sound like a garbage disposal chewing rocks. Most gate repairs in Pico Rivera run between $180 and $580 before parts, and we quote every job in writing before a single bolt gets turned. Whether your driveway gate swings over a sloped entry on Passons Boulevard or slides behind a house off Rosemead, the crew shows up in uniform with a live, trackable arrival time – not a four-hour window. Call (903) 417-0793 and a real person answers, day or night.
Why Pico Rivera Homes Are Different
Pico Rivera gates take a beating from three things most contractors never mention: heat, dust, and the city’s older housing stock. Summer temperatures routinely climb into the 90s, which shortens the life of plastic gears inside gate openers – we regularly replace stripped LiftMaster and DoorKing gears that literally melted out of shape. The fine dust that blows through the San Gabriel Valley settles into limit switches, the small sensors that tell the gate when to stop, and causes them to fail slowly rather than all at once.
Most homes here were built between the 1950s and 1970s, which matters a lot for gate work. Many original driveway gates sit on concrete pads that have shifted over decades, leaving the gate slightly out of square. That means a new opener bolted to an old, tilted gate will burn through limit switches and gears far faster than it should. We check for square and adjust mounting before we ever install anything. HOA requirements vary by tract – some neighborhoods off Whittier Boulevard have specific height and color rules – so we always ask before ordering custom steel work.
Our Main Pico Rivera Services
Pico Rivera homeowners call us most often for two problems: a gate that physically will not move and an opener that runs but doesn’t open anything. Here’s what each job looks like locally.
Gate Repair in Pico Rivera
A sagging driveway gate off Rosemead, a bent bottom rail from a brush with a delivery truck off Slauson – that’s everyday gate repair territory here. We weld, re-hang, re-level, and replace damaged sections on site. Pico Rivera gates are almost all steel or wrought iron, so repairs usually mean cutting out a bad section and welding in new material rather than swapping a panel. Gate Repair in Pico Rivera covers what happens when your gate itself is the problem.
Electric Gate Repair in Pico Rivera
When the motor hums but nothing moves, or the gate opens three feet then reverses, the issue is usually in the electrical side: a control board, a capacitor, a bad power supply, or wiring that has turned brittle after years to the San Gabriel Valley heat. We troubleshoot the entire circuit, not just the part that looks broken. Electric Gate Repair in Pico Rivera walks through diagnostics and same-and next-day repair work.
Gate Opener Repair in Pico Rivera
If the opener is dead silent, the remote stopped pairing, or the gate opener runs the wrong direction, that’s opener-level trouble. We work on nine major brands and stock common replacement parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units – so most Pico Rivera jobs don’t have to wait on a shipped part. Gate Opener Repair in Pico Rivera has the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Pico Rivera
Calder Gate Repair is factory-familiar with the openers we see most often in Pico Rivera: Linear, DoorKing, Ghost Controls, and Viking. We stock common replacement boards, remotes, and limit switches for these brands locally, which keeps most repairs to a single visit. See our brands for the full nine-brand list.
Pricing for Gate Company in Pico Rivera, CA
| Service | Typical Range in Pico Rivera |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair | $220 – $580 before parts |
| General gate repair | $150 – $450 before parts |
| Replacement remote programming | $75 – $150 |
| Limit switch replacement | $130 – $260 |
| Control board replacement | $220 – $520 before parts |
| Battery replacement (backup systems) | $90 – $180 |
| Track realignment | $150 – $300 |
What pushes a Pico Rivera job to the higher end is usually age: an opener installed in 2002 with no service history and a gate that has drifted out of square means extra labor to level before we mount anything new. Every Calder Gate Repair job gets a written price before work starts – the number on the invoice is the number we quoted, never a surprise.
Neighborhoods We Serve in Pico Rivera
We work across all of Pico Rivera, from the tracts along Rosemead Boulevard up to the residential streets near Rivera Park and down toward the 605. Typical response for a repair call in Pico Rivera is same-day when the call comes in before noon and next-day for anything after. We carry common parts in the truck, so most trips are one visit.
- Passons Boulevard area
- Rosemead Boulevard corridor
- Southeast Pico Rivera near Rivera Park
- Whittier Boulevard adjacent tracts
- West side near the Rio Hondo
Service Area – Cities Near Pico Rivera
Besides Pico Rivera, our crews take gate and opener repair calls in the surrounding communities including Montebello, CA, Santa Fe Springs, CA, Whittier, CA, and Bell Gardens, CA. If your gate sits on a hill off Slauson or a flat tract near the 5, you’re in our range.
Serving Pico Rivera, CA - Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pico Rivera
Same-day for calls before noon; next-day otherwise. We don’t give a four-hour window – every dispatch comes with a live, trackable arrival time, and a real person answers the phone 24/7 at (903) 417-0793.
Most repairs and opener swaps don’t need a permit. New gate installations and anything involving concrete footings or electrical runs sometimes do, and HOA rules in some Pico Rivera tracts add color or height restrictions. Call us and we’ll tell you what applies before you spend anything.
The 365-Day Done Right Promise is in writing on every job: if the repair fails within 365 days, Calder Gate Repair returns at no charge. That’s the full warranty, stated up front, not buried in fine print.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pico Rivera Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R.