Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Riviera Beach, FL
Most gate repairs in Riviera Beach come down to three things: salt air, afternoon storms, and openers that were never quite right for the job. Calder Gate Repair handles all three. We’re the dedicated gate division inside the Relay Home Co. family, and we work on swing gates, slide gates, and the electronics that move them. If your gate groans, stops halfway, or won’t respond to the remote, call (903) 417-0793 and a real person answers, day or night.
Why Riviera Beach Homes Are Different
Riviera Beach sits right on the intracoastal, and that changes how gates age. The salt air off the Lake Worth Lagoon works its way into hinge bearings, control boards, and the small limit switches that tell the gate when to stop. We see corroded terminals on opener boards here far more often than we do ten miles inland. Homes on Singer Island get an extra dose of it, with ocean spray layered on top of the normal Florida humidity.
The housing stock matters too. A lot of Riviera Beach properties were built between the 1950s and 1980s, which means shorter driveways, older conduit runs, and gates that were often retrofitted rather than installed from day one. That retrofitting shows up as mismatched brackets, undersized wiring, and openers borrowed from a different brand than the gate itself. Newer communities along North Congress Avenue and around Blue Heron Boulevard tend to have cleaner installs, but HOA rules there can dictate gate style, color, and even opener type – so we always ask about the association before recommending hardware.
Our Main Riviera Beach Services
Two things send Riviera Beach homeowners to the phone: a gate that won’t move at all, and an opener that works sometimes but not always. Here’s what each one looks like on the ground here.
Gate Repair in Riviera Beach
A gate that drags, sags, or won’t close square is usually mechanical, not electrical. In Riviera Beach, the usual suspects are rusted hinge pins, wheels worn flat on concrete tracks, and gate posts that have shifted in sandy soil after heavy rain. We start by checking the frame, hinges, and track before we touch the opener, because adjusting a gate that’s out of square is just buying time. Gate Repair in Riviera Beach covers swing and slide gates, post resets, wheel and roller replacement, and full gate realignment.
Electric Gate Repair in Riviera Beach
When the opener runs but the gate doesn’t move, or you hear a hum and nothing happens, the problem is usually in the electronics or the power supply. Salt corrosion on control boards is common near the water, and so are blown fuses after storms roll through. We trace the problem from the keypad or remote through the board to the motor, and we check the safety edges and photo eyes because those are what keep a closing gate from hitting a car or a kid on a bike. Electric Gate Repair in Riviera Beach covers wiring, boards, safety sensors, and power issues.
Gate Opener Repair in Riviera Beach
Opener problems in Riviera Beach split into two camps: remotes that stopped working and openers that work but overheat in the midday sun. Florida heat is hard on capacitor and gear wear, especially on units mounted without any shade. We’re factory-familiar with nine major brands, so whether it’s a LiftMaster arm opener on a swing gate or a Viking slide operator on a commercial-grade track, we carry the parts that commonly fail and we don’t have to order blind. Gate Opener Repair in Riviera Beach covers diagnostics, board replacement, remote programming, and full opener swaps.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Riviera Beach
We’re factory-familiar with nine opener brands, and in Riviera Beach we most often see Linear, Viking, Ghost Controls, and DoorKing units on residential gates. Our trucks carry common boards, remotes, and safety parts for these lines, which means we can usually finish the repair on the first visit instead of coming back twice. See our brands for the full list and what we stock.
Pricing for Gate Company in Riviera Beach, FL
Every job gets a written price before any work starts. Here’s what that looks like for common gate work in Riviera Beach.
| Service | Typical range in Riviera Beach |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair (standard call) | $160 – $325 before parts |
| Gate repair (mechanical) | $150 – $300 before parts |
| Hinge replacement | $120 – $220 |
| Gate wheel or roller replacement | $90 – $180 |
| Track realignment | $120 – $250 |
| Control board replacement | $220 – $400 including part |
| Safety sensor replacement | $110 – $210 including part |
| Remote programming | $60 – $110 per remote |
| Post reset | $180 – $350 |
Two things push the number up in Riviera Beach: gates within a few hundred feet of the intracoastal often need more corrosion-related part replacement, and older homes with undersized wiring sometimes require a new power run before an opener will function reliably. The number we quote at the door is the number on the invoice, and you approve it before we turn a wrench.
Neighborhoods We Serve in Riviera Beach
We cover all of Riviera Beach, from the condos on Singer Island to the older single-family streets west of US-1. Most calls get a live, trackable arrival time within the same day, and emergency calls are answered around the clock.
- Singer Island
- Northwood
- Monet Heights
- Riviera Beach Heights
- Lake Park
Service Area – Cities Near Riviera Beach
Riviera Beach is our local market, and we also keep crews running in nearby metro areas. If you’re in Jacksonville, FL, Miami, FL, Tampa, FL, or Orlando, FL, the same pricing rules and the same 365-Day Done Right Promise apply. Dispatch and scheduling are coordinated from our Miami office, and crews serve Riviera Beach locally.
Serving Riviera Beach, FL - Our Local Coverage Area
We’re based in the Riviera Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Riviera Beach
Most Riviera Beach calls get a same-day arrival window you can track on your phone, with emergency service available 24/7. When you call (903) 417-0793, a live person confirms the address and gives you a real arrival time, not a four-hour guess.
Some communities, especially gated ones and newer HOA-run developments, do require approval for gate hardware changes. We recommend checking your association rules before swapping an opener, and we can usually match the replacement to whatever the HOA specifies. We’ll help you document it, but the approval itself comes from the association.
Yes, that’s normal in Riviera Beach. We replace corroded hinges, hardware, and control boards regularly. The key is using marine-grade or coated hardware on replacement so the fix holds up better than the original. Call (903) 417-0793 and we’ll give you a written price before starting.
If your gate is stuck, slow, or making a sound it never made before, call Calder Gate Repair at (903) 417-0793. A live person answers, you get a written price before any work starts, and every repair carries the 365-Day Done Right Promise. If it fails within a year, we come back at no charge.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Riviera Beach Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R.