Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Silverdale, WA
Gate repair in Silverdale comes with a specific set of local conditions: marine air that accelerates rust on steel hinges, wet winters that push water into opener housings, and plenty of long driveways off Ridgetop and Newberry Hill where a dead gate opener means you’re not getting the car out. Calder Gate Repair is the dedicated gate specialist serving Silverdale, part of the Relay Home Co. family since 2009. We’re the crew homeowners call when a gate won’t open, won’t close, or won’t stop in the right spot. Call (903) 417-0793 and you’ll get a live person, not a voicemail.
Why Silverdale Homes Are Different
Silverdale’s gate repair jobs are shaped by two things: the climate and the housing stock. The Kitsap Peninsula’s marine air keeps moisture in the gate hardware year-round. We routinely replace rusted hinge bolts and corroded limit switches on Silverdale gates that look fine from the outside but are failing underneath. The other factor is the mix of properties. Silverdale has everything from newer planned communities with shared entry gates to older homes on larger lots off Clear Creek Road and Anderson Hill Road, where a long driveway and a heavy steel gate put real strain on the opener. Rural-style properties mean longer cable runs from the house to the gate, more exposure to wind, and more wildlife-triggered false opens. Some neighborhoods have HOA rules about gate style and repair work, so we keep our trucks clean and our paperwork tidy. If your gate faces a slope, the opener works harder every single cycle – that’s a conversation we have often with Silverdale homeowners.
Our Main Silverdale Services
Most Silverdale homeowners call us for one of two things: a gate that’s physically broken, or an opener that’s acting up. Both have their own Silverdale page with full pricing and local detail.
Gate Repair in Silverdale
Physical gate failure: sagging, dragging, warped steel, snapped wheels, broken hinges, or a gate that’s come off its track entirely. In Silverdale, the constant moisture means rusted hardware is the usual culprit, especially on older steel gates that have been through a decade of Kitsap winters. We carry heavy-duty galvanized replacements so the fix holds. If the gate is still standing but leaning hard, the post is likely shifting in wet soil. We’ll tell you honestly whether it’s a hardware job or a post reset before we touch anything. Full details and pricing are on the Gate Repair in Silverdale page.
Electric Gate Repair in Silverdale
When the gate has 120V or 24V running to it and something in the electrical path fails: capacitor, transformer, wiring, relay, or a burned-out motor. Silverdale’s damp conditions are rough on electrical connections. We see corrosion inside control boards and water intrusion into junction boxes regularly. That’s why we replace connections with sealed, weather-rated fittings rather than whatever was originally installed. Safety edges and photo eyes are part of this work too – those are the sensors that stop the gate before it hits a car or a person. Details on the Electric Gate Repair in Silverdale page.
Gate Opener Repair in Silverdale
The opener is the motorized unit that moves the gate. When it hums but doesn’t move, moves halfway then stops, or stays running too long, the problem is usually a limit switch, capacitor, or stripped gear. Silverdale’s long driveways mean many homes have older, heavier openers that have simply worn out their internals. We diagnose on the spot and replace only what’s actually broken. The opener is also where we handle radio receivers and keypad programming, which matters when the hardware is fine but the remote won’t trigger it. Full scope and pricing are on the Gate Opener Repair in Silverdale page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Silverdale
We’re factory-familiar with nine major gate opener brands, so the diagnosis on a Viking, Ghost Controls, DoorKing, or Elite system takes minutes rather than hours. Common parts for these units are stocked in our local trucks, so most Silverdale repairs are finished the same visit. If your opener isn’t on that short list, check our brands page – if it opens a gate, we’ve likely worked on it.
Pricing for Gate Company in Silverdale, WA
| Service | Typical range in Silverdale |
|---|---|
| Gate opener / motor replacement | $1,200 – $1,800 |
| Electric gate stuck open | $150 – $450 |
| Gate opener arm replacement | $300 – $600 |
| Bent gate hinge replacement | $150 – $450 |
| Gate opener gear replacement | $250 – $500 |
| Gate wheel / caster replacement | $150 – $400 |
| Gate opener logic board repair or replacement | $250 – $650 |
| Gate keypad / entry system | $250 – $600 |
| Capacitor replacement | $180 – $380 |
| Limit switch replacement | $180 – $380 |
| Electric gate post / hinge weld repair | $300 – $800 |
| Transmitter / receiver replacement | $150 – $350 |
What pushes a Silverdale price toward the high end of those ranges? Usually water damage that was left too long, a gate that’s too heavy for its opener, or corrosion that means multiple parts need replacement at once. Before we start any work, you get a written price for the whole job. The number on that quote is the number on the invoice. Always.
Neighborhoods We Serve in Silverdale
We cover all of Silverdale, including the surrounding residential pockets that don’t always show up on a city map. Our typical response window in the area is same-day for urgent gate failures and next-day for scheduled diagnosis.
- Ridgetop
- Central Silverdale
- Clear Creek
- Newberry Hill
- Anderson Hill
Service Area – Cities Near Silverdale
Silverdale is our hub, but we regularly take calls from homeowners just outside the city limits. If you’re in Poulsbo, WA, Tracyton, WA, or Bremerton, WA, we can usually reach you the same day. We also serve Manchester, WA for less urgent gate work. Dispatch for all of these areas is coordinated from our Seattle office; the crew that shows up is local to the Kitsap side.
Serving Silverdale, WA - Our Local Coverage Area
We’re based in the Silverdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Silverdale
Most Silverdale calls get same-day response if the gate is stuck open or won’t open at all. That’s the priority. For non-urgent diagnosis, next-day is typical. Every call goes to a live person, so you’ll know your arrival window before you hang up. Call (903) 417-0793.
It depends on your community. Some Silverdale neighborhoods with shared entry gates have HOA rules about gate style, color, or contractor requirements. If you have an HOA, check your governing docs before scheduling. We’ll match the existing hardware and finish wherever possible to keep the change low-profile.
We cover all of Silverdale and the nearby communities of Poulsbo, Tracyton, Bremerton, and Manchester. If you’re on the edge of one of those areas, call and we’ll confirm whether your address is in our service range.
If your gate is giving you trouble in Silverdale, call Calder Gate Repair at (903) 417-0793. You’ll get a live person, a straight answer, and a written price before any work begins. Led by Nico Alvarez, our crew knows Silverdale’s gates, openers, and damp-air hardware problems better than anyone.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Silverdale Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.