Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Spokane, WA
Gate repair in Spokane means dealing with freeze-thaw cycles that heave gate posts, summer wildfire ash that gums up opener tracks, and neighborhoods where almost every driveway slants toward the street. Calder Gate Repair handles all of it: broken hinges, dead opener boards, sagging cantilever gates, and safety sensors knocked out of alignment by snowplow berms. Every job gets a written price before we touch a bolt, and every repair is backed by our 365-Day Done Right Promise. Call (903) 417-0793 and a live person answers, day or night.
Why Spokane Homes Are Different
Spokane’s gate work follows the seasons. From November through March, the ground heaves as it freezes and thaws, and that movement slowly works posts loose, especially on the South Hill where clay soil holds water. A gate that swung clean in August drags across its track by January. Homeowners on Five Mile Prairie and in Mead deal with wind-driven snow packing into opener arms and limit switches, the small sensors that tell the gate when to stop. When those get frozen, the gate either stops short or slams past its stop point.
The housing stock matters too. Spokane is full of 1950s and 60s ranchers with long, flat driveways in neighborhoods like Shadle and Audubon Park. Those gates tend to be chain-drive slide gates that need constant tension adjustment. Newer builds off Indian Trail Road and in the Wandermere area lean toward steel ornamental swing gates with Mighty Mule or Ghost Controls openers, and those fail differently: control board errors, remote frequency drift, and hinge welds cracking after a few hard winters. Calder Gate Repair services all of it, and we stock parts in our local vans so most repairs happen in a single visit.
Our Main Spokane Services
When a gate stops opening in Spokane, it’s usually one of three problems: the gate itself is off its track or out of alignment, the electric drive system has failed, or the opener unit has died. Here’s how we handle each one.
Gate Repair in Spokane
This covers the physical gate: hinges, rollers, tracks, posts, and the frame itself. In Spokane, the most common call we get in spring is a gate that froze to the ground over winter and tore its hinge welds loose when someone tried to force it open with the opener. We realign, reweld, and replace what’s bent. If your gate scrapes, sags, or won’t latch, Gate Repair in Spokane is the page to read. We quote the full repair before starting, and the price on your invoice matches the price we agreed to on the phone.
Electric Gate Repair in Spokane
Electric gate systems in Spokane run on low-voltage wiring, circuit boards, and safety edges, all of which take a beating from our weather. Underground wire splices corrode faster here than in drier climates, and ground faults are common after spring runoff. We trace the circuit, replace damaged wire, install waterproof junction boxes, and get the gate responding again. For detail on how we diagnose and fix electrical faults, see Electric Gate Repair in Spokane.
Gate Opener Repair in Spokane
When the opener itself quits, you need someone who knows the brand and the board. Calder technicians are factory-familiar with nine major opener brands, including Linear, FAAC, BFT, and Viking, the four we see most often across Spokane. We keep replacement control boards, remotes, and photo eyes stocked locally so most opener repairs are done in one trip. Read more at Gate Opener Repair in Spokane.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Spokane
We’re factory-familiar with nine major gate opener brands, and the four we see most in Spokane are FAAC, BFT, Linear, and Viking. Our vans carry boards for all of them plus remotes and safety sensors, which means most opener repairs happen same-visit. See what we stock at our brands page.
Pricing for Gate Company in Spokane, WA
| Service | Typical range in Spokane |
|---|---|
| Hinge and weld repair | $180 – $340 |
| Gate opener board replacement | $220 – $410 |
| Track realignment | $160 – $290 |
| Safety sensor replacement | $120 – $240 |
| Remote programming | $80 – $150 |
| Limit switch replacement | $140 – $260 |
| Underground wire fault repair | $200 – $380 |
| Post reset and concrete | $260 – $480 |
Prices in Spokane shift most when winter damage bent the posts or the opener arm, because the gate has to come off and the post is usually re-bedded in fresh concrete. Whatever the job, you get a written price before any work starts, so the final invoice never surprises you.
Neighborhoods We Serve in Spokane
We work across the entire Spokane metro, from the older tree-lined streets of the South Hill to the newer subdivisions past Indian Trail. Most central and north-side neighborhoods get same-day or next-morning dispatch, and we keep a tech staged near Spokane Valley for quicker response on the east side.
- South Hill
- Shadle Park
- Audubon Park
- Five Mile Prairie
- Wandermere
Service Area – Cities Near Spokane
Calder Gate Repair covers Spokane and the surrounding communities. We routinely dispatch to Airway Heights, Mead, Medical Lake, and Cheney, with scheduling coordinated through our Seattle brand office and local Spokane-area crews doing the work. If you’re within 40 minutes of downtown Spokane, we can almost always help.
Serving Spokane, WA - Our Local Coverage Area
We’re based in the Spokane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Spokane
Most central Spokane addresses get same-day service when you call before 2 PM, and many North Side and South Hill calls are reached within a few hours. Evening and weekend emergencies are covered too; a live person answers (903) 417-0793 at any hour and dispatches a tracked tech, not a voicemail.
Most repairs and opener replacements don’t need a city permit. If your HOA covers the streetscape, they may require matching materials or a quick review first. Calder handles the repair side; if paperwork is needed, we’ll tell you exactly what to request so you’re not stuck in the middle.
Calder Gate Repair is a gate repair specialist inside the Relay Home Co. family, with scheduling coordinated from the Seattle brand office and dedicated local crews serving Spokane. Every tech is background-checked, uniformed, and arrives with a live arrival time you can track.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Spokane Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.