Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Universal City, TX
Gate repair in Universal City, TX means working on homes where the soil shifts, summers hit triple digits, and most properties sit on compact lots with gates that run several times a day. We’re Calder Gate Repair, the gate-focused division of the Relay Home Co. family, and this page is your starting point for understanding gate work in Universal City: what it costs, what the local conditions do to equipment, and how quickly we can get someone to your gate. Call (903) 417-0793 any time – a live person answers, not a voicemail.
Why Universal City Homes Are Different
Universal City sits on the northeast edge of the San Antonio metro, and the housing stock reflects that: a mix of 1960s and 1970s ranch-style homes, newer subdivisions, and a significant number of properties with perimeter fencing and driveway gates. The soil here is clay-heavy. During dry spells it contracts, during wet seasons it expands, and that movement transfers directly into gate posts. We regularly see gates in Universal City that have drifted out of alignment not because the hinges failed but because the ground underneath them shifted half an inch. That half inch becomes a gate that drags, a latch that won’t catch, or an opener motor working twice as hard as it should.
Heat is the second factor. July and August temperatures routinely climb into the 90s and 100s, and that has a measurable impact on gate electronics. Circuit boards inside operator boxes corrode faster here than in milder climates, capacitors degrade, and plastic limit-switch housings become brittle. When we replace a control board on a Viking or Ghost Controls opener in Universal City, we re-seat it in a clean housing and check the ventilation, because a board that bakes in a sealed box will fail again. These aren’t generic national failure patterns – they’re the specific failure patterns of this part of Texas.
Our Main Universal City Services
Universal City homeowners call us most often for two things: a gate that won’t open at all, and an opener that runs but doesn’t move the gate. Each service has its own dedicated Universal City page linked below.
Gate Repair in Universal City
A gate that’s off its track, sagging on one hinge, or dragging across the driveway is the bread-and-butter job here. Universal City’s clay soil plays an oversized role: the post shifts, the gate follows, and suddenly the latch doesn’t line up. We straighten, reinforce, and re-align the gate, then set the opener’s limits to match the corrected geometry. If you’re dealing with a physical gate that won’t close or is scraping the ground, start with the Gate Repair in Universal City page for exact local pricing and what a same-day visit looks like.
Electric Gate Repair in Universal City
Electric gate repair is the electrical and mechanical side of the job: sensors, wiring, safety edges, photo eyes, and the low-voltage runs between your house, the control box, and the operator. Universal City homes built in the 60s and 70s often have gate wiring that was undersized for modern operators, and that becomes a recurring source of nuisance failures. We diagnose the circuit before replacing parts, because an opener that works on the bench but not on your gate is usually a wiring problem, not a motor problem. For Universal City electrical diagnostics and repair details, visit the Electric Gate Repair in Universal City page.
Gate Opener Repair in Universal City
When the motor runs but the gate doesn’t move, or the opener hums and trips, you’re looking at an opener repair. Universal City sees a lot of opener failures in early summer, when the first heat wave catches aging capacitors and weak control boards. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we test the repair under load before we leave. For full details on opener-specific repairs in Universal City, including what’s covered under our 365-Day Done Right Promise, see the Gate Opener Repair in Universal City page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Universal City
We’re factory-familiar with nine major gate opener brands, and the ones we see most often in Universal City are LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our techs carry common replacement parts and control boards on the truck for those brands, so many Universal City opener repairs are done in a single visit. For the full picture, see our brands page.
Pricing for Gate Company in Universal City, TX
Every Universal City job gets a written price before any work starts. Here are the typical ranges we quote for the most common gate services in this area:
| Service | Typical Range in Universal City |
|---|---|
| Gate opener diagnostic | $95 – $150 (waived with repair) |
| Gate opener repair | $225 – $475 before parts |
| Opener motor replacement | $350 – $800 including labor |
| Circuit board replacement | $275 – $625 including labor |
| Gate off track / re-alignment | $175 – $375 |
| Hinge replacement (set) | $150 – $400 per set |
| New gate opener installation | $950 – $2,200 depending on brand and arm type |
| Limit switch replacement | $150 – $275 |
| Remote / keypad programming | $85 – $150 |
| Low-voltage wiring repair | $125 – $300 |
Universal City’s clay soil can push alignment work higher when posts have shifted enough to need re-setting in concrete. The price on your written estimate is the price you pay, quoted and agreed before a single bolt is turned.
Neighborhoods We Serve in Universal City
We cover the full Universal City area, including the neighborhoods off Pat Booker Road, the residential streets around Universal City Park, the older subdivisions near Kitty Hawk Road, the communities along Loop 1604, and newer developments toward the eastern edge of town. Our typical response time for Universal City gate repairs is the same day or next morning, depending on when you call.
- Olympia Hills area
- Rose Garden Estates
- Universal City Heights
- Kitty Hawk corridor
- Neighborhoods off Pat Booker Road
Service Area – Cities Near Universal City
Calder Gate Repair serves Universal City and the surrounding northeast San Antonio corridor. If your gate is in a neighboring community, you’ll find local pricing and service details here: Schertz, TX, Converse, TX, Cibolo, TX, and San Antonio, FL. Scheduling for Universal City is coordinated through our San Antonio office, with local crews dispatched directly to Universal City addresses.
Serving Universal City, TX - Our Local Coverage Area
We’re based in the Universal City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Universal City
Most Universal City gate repair calls are scheduled for same-day or next-morning service. Because we dispatch locally and keep common opener parts on the truck, a single-visit repair is the norm rather than the exception. Call (903) 417-0793 and a live person will give you a real arrival window, not a vague four-hour range.
Some Universal City neighborhoods have HOA rules about gate appearance, hardware finish, or opener specifications. We work with whatever your HOA requires and can match hardware finishes when you show us the guideline. We don’t handle permits ourselves, but we’ll tell you if your job looks like it needs one before we start. Call (903) 417-0793 with your HOA details and we’ll give you a straight answer.
No. Estimates are free, and every Universal City job starts with a written price agreed before work begins. The number on your invoice won’t be higher than the number you approved at the door. Call (903) 417-0793 to schedule a free estimate – a live person answers around the clock.
When your gate stops working in Universal City, call Calder Gate Repair at (903) 417-0793. We’ll send a background-checked, uniformed technician with a trackable arrival time, a written price before work starts, and every repair backed by our 365-Day Done Right Promise: if the repair fails within 365 days, we return at no charge. That’s the Relay Standard, and it’s how every Universal City job runs.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Universal City Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.