Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Parker, TX
Gate repair in Parker, TX runs anywhere from $95 for a basic sensor realignment to $600 – $1,800 for a full opener replacement, depending on the damage and the brand sitting under the control box. We’re Calder Gate Repair, the dedicated gate division inside the Relay Home Co. family, and we handle the gate problems that Parker’s specific mix of acreage properties and suburban homes throws at us. Call (903) 417-0793 and you’ll get a real person, a live arrival time you can track, and a written price before anything gets unscrewed.
Why Parker Homes Are Different
Parker sits on the eastern edge of Collin County, where you’re just as likely to find a five-acre horse property off Parker Road as you are a newer subdivision tucked behind Southfork Ranch. That split matters for gate work. Acreage gates tend to be long, heavy, and run on solar-powered operators with battery backups wired into perimeter fencing. Subdivision gates are usually shorter ornamental steel, but they’re often tied into HOA aesthetic rules that dictate exact materials, colors, and hardware styles. The weather compounds both: North Texas clay soil heaves with every wet-dry cycle, which slowly knocks gate posts out of plumb until the leaf drags on the latch side. We see it constantly in Parker, and it’s usually the quiet cause behind a gate that stopped closing properly.
The spring storm season also sends lightning strikes through opener control boards and burns out limit switches, the small sensors that tell the gate where to stop at full open and full close. Add in the summer heat pushing 100 degrees, and a gate that sits in direct sun all afternoon will age its plastic gear racks noticeably faster than one shaded by oaks. These are Parker conditions, and they change which parts we stock, which brands we recommend, and how we diagnose a failure on the first visit.
Our Main Parker Services
These are the three jobs Parker homeowners call us for most, and each one has its own dedicated page with full pricing and detail.
Gate Repair in Parker
Mechanical gate failures in Parker tend to fall into a few familiar buckets: a wheel dropped off its track, a hinge pulling loose from a leaning post, or a leaf so far out of alignment the motor stalls against it. We repair the physical gate itself, including welding cracked frame joints, re-hanging sagging leaves, and replacing worn rollers and hinges on both swing and slide systems. On Parker’s larger estate gates, we also handle cantilever wheel assemblies and chain drives that have stretched from years of North Texas temperature swings. Gate Repair in Parker has the full scope and pricing breakdown.
Electric Gate Repair in Parker
When a Parker gate has power but won’t run on command, the trouble is usually in the electrical path: a dead battery, a tripped photo eye, a fried control board, or corroded wiring at the splice where the underground conduit meets the post. We carry replacement boards, batteries, receivers, and safety sensors for the brands most common in Parker, so most electric diagnoses end in the same visit. Lightning damage is one we see every spring and fall storm season, and with the heavy clay soil shifting conduits, shorts at the buried junction are more common here than in cities with sandier ground. Electric Gate Repair in Parker covers the electrical side in depth.
Gate Opener Repair in Parker
Openers fail in specific ways, and the brand tells us where to look first. Linear and Viking swing-arm operators wear out their internal limit cams over time, which makes the gate stop short or over-travel. FAAC and BFT hydraulic operators lose pressure from old seals and move sluggish when the Parker summer heat thins the fluid. We rebuild, replace, and reprogram opener motors, arms, and control logic across all nine brands we carry, and every repair includes the 365-Day Done Right Promise: if it fails within a year, we return at no charge. Gate Opener Repair in Parker has the brand-by-brand breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Parker
We work on FAAC, BFT, Linear, and Viking openers most weeks in Parker, and we stock replacement boards, arms, and safety sensors for all of them on our local trucks. Check our brands page for the full nine-brand lineup and which parts we carry in stock.
Pricing for Gate Company in Parker, TX
| Service | Typical range in Parker |
|---|---|
| Diagnostic / service call | $59 – $99 |
| Gate opener gear replacement | $150 – $300 |
| Control board replacement | $200 – $400 |
| Limit switch replacement | $95 – $220 |
| Cantilever roller replacement | $180 – $350 |
| Safety sensor replacement | $120 – $250 |
| Keypad / receiver replacement | $125 – $275 |
| Actuator arm replacement | $400 – $800 |
| Battery replacement | $120 – $300 |
| Full gate opener replacement | $600 – $1,800 |
Long driveway runs and heavier custom gates push material costs up, and HOA-required hardware styles in some Parker communities mean the replacement part costs more than a standard equivalent. Whatever the job, the price is written and agreed before we touch a single bolt, so the invoice matches the number you approved at the door.
Neighborhoods We Serve in Parker
We cover every corner of Parker, from the acreage spreads along Parker Road and FM 2514 to the newer developments built around the Southfork area. Typical response is same day for most repairs, with structured scheduling for full opener replacements that need parts ordered to spec.
- Parker Road corridor
- Southfork Ranch area
- FM 2514 acreage properties
- Newer subdivisions east of Parker
- Communities near the Parker-Lucas line
Service Area – Cities Near Parker
While Parker is our main service hub, our DFW dispatch also runs gate repairs in nearby Dallas, TX and Fort Worth, TX. We also maintain dedicated pages for Houston, TX and San Antonio, FL for clients in those metros. If you’re within the broader North Texas corridor, call and we’ll route you to the right crew.
Serving Parker, TX - Our Local Coverage Area
We’re based in the Parker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Parker
Most Parker repair calls get a same-day visit, and for a gate stuck open with a security concern, we prioritize those ahead of routine tune-ups. Call (903) 417-0793 and the dispatcher can give you a live arrival time you can track on your phone, not a four-hour window.
Repairs and part replacements on an existing gate don’t typically need a permit in Parker. New gate installations or changes to an automatic opener’s electrical run may trigger city or HOA review, and some Parker communities require design approval before you change gate materials or colors. We can tell you what applies to your street.
Yes. We run calls from the Parker Road corridor out to the FM 2514 acreage properties and everything between. Solar-powered and long-driveway gate systems are common out there, and we carry battery and solar diagnostics gear on every truck so a first visit actually gets the answer. Call (903) 417-0793 for a free estimate on any gate problem in Parker.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Parker Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R.