Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Houston, TX
Calder Gate Repair is the Houston gate specialist that shows up with a written price, a real arrival time you can track, and a one-year guarantee on the work. Most Houston gate repairs come down to three things: a gate opener that quit, a hinge or wheel that gave out under daily use, or wiring that Houston’s humidity finally got to. If your gate won’t open, sags, or makes a sound like a bag of rocks, call (903) 417-0793 and a live person answers – 24 hours a day.
Why Houston Homes Are Different
Houston gates live a harder life than most. The heat and humidity do a number on circuit boards, capacitor wires, and anything steel that is not galvanized. We see it all the time in neighborhoods like Kingwood, Meyerland, and The Heights: a gate that worked fine in January starts grinding in July because the thermal cycling has chewed up the limit switch – the small sensor that tells the gate when to stop. Then there is the soil. Houston clay expands and contracts with rain, and that movement slowly pulls gate posts out of alignment. A gate that is dragging today was often perfectly level six months ago. Add in hurricane-season wind gusts and you have a gate that needs more attention than the same install in Dallas or Austin would.
Many Houston subdivisions have HOA covenants that dictate gate material, color, and even opener style. We work with those requirements, not against them, and we will tell you if a repair plan is likely to raise an HOA flag before you pay for anything.
Our Main Houston Services
Most Houston homeowners call Calder for one of three things: a gate that will not budge, an electric gate that has started acting erratically, or an opener that responds when it feels like it. Each service has its own dedicated Houston page so you can get pricing and detail without wading through everything else.
Gate Repair in Houston
A Houston gate repair usually means one of three jobs: re-hanging a gate that has sagged on its hinges, replacing a wheel or roller that snapped on the track, or repairing physical damage from a vehicle or storm. In Houston specifically, we see a lot of post movement from clay soil and a lot of rust creep on older steel gates near the bayous. We bring the gate back into plumb, replace the worn hardware, and re-set the opener travel so the gate closes fully every time. Every repair is quoted in writing before work begins. See Gate Repair in Houston for full pricing and details.
Electric Gate Repair in Houston
Electric gate problems in Houston often start where the power enters the gate: deteriorated wire insulation, fried control boards, bad safety sensors, or an underground splice that finally shorted in wet soil. We diagnose the system end to end, from the breaker to the actuator, and replace only what actually failed. Houston’s summer storm cycle tends to reveal weak grounds and corroded connections that went unnoticed for months. Every electric gate repair carries the 365-Day Done Right Promise: if the repair fails within a year, Calder returns at no charge. Details are on the Electric Gate Repair in Houston page.
Gate Opener Repair in Houston
When a Houston gate opener stops responding, the cause is usually one of four things: a dead capacitor, a stripped gear, a faulty limit switch, or a receiver board damaged by a nearby lightning strike. We are factory-familiar with LiftMaster, Viking, DoorKing, Ghost Controls, Elite, and several other major brands, so we typically repair on the first visit rather than ordering parts and waiting. Houston’s humidity and frequent thunderstorms make opener repair the single most common gate service we perform in the metro. Visit Gate Opener Repair in Houston for a full breakdown of what repairs cost in Houston.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Houston
We repair and maintain gate openers from DoorKing, Elite, Viking, and Ghost Controls, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We stock common control boards, remotes, safety edges, and limit switches for these brands locally, which means most repairs in the Houston area are completed the same visit. See our brands for the full list.
Pricing for Gate Company in Houston, TX
| Service | Typical range in Houston |
|---|---|
| Gate opener repair (labor, before parts) | $180 – $340 |
| Remount / re-align a sagging gate | $200 – $475 |
| Replace a gate wheel or roller | $120 – $260 |
| Replace a hinge set | $150 – $320 |
| Replace a gate opener (labor only) | $250 – $600 depending on opener type |
| Wire repair / splice replacement | $110 – $250 |
| Safety sensor / photo-eye replacement | $140 – $290 |
| Control board replacement (part + labor) | $260 – $650 depending on brand |
| Full gate tune-up (inspection, lube, limit adjustment) | $130 – $240 |
What pushes a Houston repair higher is access: a gate post set in a flowerbed, a control box buried behind landscaping, or an opener that requires a lift to reach. The price on the estimate is the price on the invoice, always, and that written price is in your hand before any work starts.
Neighborhoods We Serve in Houston
Calder Gate Repair dispatches locally from the Houston office and covers the full metro, from inner-loop neighborhoods to the outermost suburbs. Our typical Houston response time for non-emergency calls is same-day or next-morning, with emergency calls prioritized for same-day arrival.
- Kingwood
- Meyerland
- The Heights
- Clear Lake
- Katy
- Cypress
Service Area – Cities Near Houston
Calder Gate Repair serves the entire Houston metro and the surrounding communities. If you are in Galena Park, TX, Channelview, TX, or South Houston, TX, we can usually reach you the same day. Clients in Pasadena, CA are served by our California-area scheduling desk during regular hours. For anything inside the Houston city limits, call direct.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Houston
For a gate stuck open or a security gate that will not close, we prioritize same-day arrival across the Houston metro. Call (903) 417-0793 and a live person books the dispatch while you are on the phone – no voicemail, no call-back lottery. You receive a trackable arrival time before the technician leaves the Houston office.
Some do, especially for front-facing gates in master-planned communities. Most repair work that keeps the existing gate material and operator does not require HOA approval, but if a Houston HOA has rules about opener brand or panel color we will flag it before ordering parts so you do not get a violation letter after the repair is done. Call (903) 417-0793 with your HOA standards and we will tell you if there is any conflict.
Every Calder Gate Repair job in Houston includes a written guarantee. If the same repair fails within 365 days, we return and fix it at no charge – no diagnostic fee, no service call charge, no fine print. That applies to opener repairs, hinge replacements, wiring, and full gate tune-ups alike. The promise is printed on your written estimate before work starts, so there is never a question about what is covered. For an exact quote on your Houston gate, call (903) 417-0793 – estimates are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Houston Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R.