Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Houston
Gate repair in Houston usually comes down to one of three things: a hinge post that moved, a control board that took a surge, or a slide gate rail that’s no longer level with the operator. Most repairs run $180 to $550 before parts, and a real technician can diagnose the problem in under an hour. Calder Gate Repair dispatches background-checked, uniformed techs across Houston with a live arrival time you can track, and every job gets a written price before any work starts. Call (903) 417-0793 and a live person answers, day or night.
Key Takeaways
- Houston’s expansive clay soils shift gate posts out of plumb, which makes sagging gates a footing problem more often than a panel problem.
- Most gate opener repairs in Houston run $180 to $550 before parts; full opener replacements typically land between $850 and $1,800 installed.
- Every repair carries the 365-Day Done Right Promise. If the fix fails, Calder returns at no charge.
- You get a written price before work starts, a live arrival time, and a digital invoice you pay from a link.
Why Calder Gate Repair Is Houston’s Preferred Gate Repair Company
Houston homeowners call us because we answer the phone and we show up when we say we will. Calder Gate Repair is the dedicated gate specialist inside the Relay Home Co. family, established in 2009 and independently owned. Our techs are factory-familiar with nine major opener brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, so we do not need to guess at a wiring diagram on a Ghost Controls unit from 2016. Every job carries three non-negotiable guarantees: a written price before any work starts, a written guarantee on every repair, and a free second visit if the repair fails within 365 days.
We know Houston’s neighborhoods. We have repaired slide gates along Bissonnet near the 610 Loop, swing gates in the Heights, and driveway openers out toward Sugar Land and Katy. Local knowledge matters here because Houston’s soil does things to gate posts that a national hotline tech will never believe until they see it. Scheduling and dispatch are coordinated from the brand’s Houston office, so the technician you get knows the city’s gate failure patterns, not just the manual.
Driveway Gate Repair in Houston
Driveway Gate Repair in Houston often starts with a post that has gone out of plumb rather than the gate panel itself. Houston sits on expansive clay that shrinks in dry months and swells during the rainy season, which actively works against any footing that was not poured deep enough. When the hinge post shifts, the gate sags, drags, or stops latching, and welding the panel back straight does not fix the root cause. In cases like a Meyerland job we handled, the proper fix was replacing the failed hinge post and re-hanging the leaf, not just patching the sag. Typical driveway gate repairs run $200 to $500 for hinge and alignment work, with operator replacement pushing toward $1,200 to $1,600 on the high end if the opener has failed alongside.
Hinge and Post Repair
A gate that suddenly drags against the driveway usually has a hinge post leaning back or sideways. We dig out the old footing, re-set the post in concrete with proper depth for Houston’s soil movement, and re-hang the leaf so it swings clean. This is the repair we recommend over welding a sag because it actually stays fixed.
Gate Realignment
Slide gates in Houston drift out of alignment when the driveway slab heaves during dry spells. The gate starts grinding against the rail or tripping the safety photocell mid-travel. Realigning means re-leveling the operator on its pad, adjusting the rack and pinion mesh, and re-testing the reversing edges. Expect to pay between $180 and $340 for a standard realignment call.
Gate Welding in Houston
Gate Welding in Houston is what you need when steel has actually cracked, rusted through, or separated at a weld seam. Our techs use reinforced repairs on ornamental iron gates and steel tube frames, cleaning the rust back to clean metal before welding so the repair does not fail inside a year. On a Gate Welding job in Houston, we will often find the crack is a symptom: the gate twisted because a hinge post moved, and the panel cracked under the strain. That is why a proper weld repair includes checking the posts and the operator mounts, not just burning a bead over the crack. Structural weld repairs typically run $150 to $400 for residential gates, depending on access and how much rust removal is required.
Weld and Rust Repair
Houston’s humidity accelerates surface rust on steel gates, especially in neighborhoods near the bayous or along the Ship Channel where salt air adds to the problem. We grind, treat, and repaint the affected sections after welding. If the rust is extensive, we will tell you honestly whether a full panel replacement costs less over three years than chasing rust patches.
Lock and Latch Repair
A gate lock that will not hold is often a post alignment problem wearing the latch out. We repair, replace, or re-strike the latch so the gate secures properly. Gate lock repairs in Houston typically run $95 to $180, and we stock common hardware so most calls are one visit.
Trusted Brands We Service in Houston
Calder Gate Repair is factory-familiar with nine major opener brands, and for Houston customers we carry common parts locally for Viking, Ghost Controls, DoorKing, and Elite units, which we see frequently across the city’s neighborhoods. That means no three-day wait for a control board to ship from a warehouse when your Viking swing gate will not close. We service lift-and-slide, swing, and rolling gate configurations from all major manufacturers, and our techs arrive with the diagnostic tools and common parts already on the truck. You will know the exact part and labor cost before we start.
Common Gate Repair Problems We See in Houston Homes
- Hinge post failure from clay soil movement. Houston’s expansive soils shrink and swell with wet-dry cycles, which shifts footings and puts posts out of plumb. The gate sags even when the panel itself is structurally fine, and the permanent fix is re-setting the post, not welding the sag.
- Control board failure after power surges. Hurricane-season lightning and brownouts across Houston are hard on gate opener boards. LiftMaster, FAAC, and BFT control boards are especially vulnerable when the grid flickers, and the symptom is usually a gate that will not respond or only moves a few inches.
- Rack and pinion misalignment on slide gates. Concrete driveway slabs across Houston heave during summer dry spells, which changes the rail alignment relative to the operator. The gate starts grinding, stalls at the open or close point, or trips the safety photocell mid-travel.
- Photocell and safety edge faults. Houston gates run in humidity, and moisture gets into sensors and wiring connections. When a gate reverses for no reason or refuses to close, the problem is often a corroded safety sensor or an intermittent edge switch. We test the full reversing system on every repair, because a gate that does not reverse is dangerous to people and pets.
Pricing for Gate Repair in Houston, TX
Most gate opener repairs in Houston run $180 to $550 before parts. A simple limit switch or photocell replacement usually lands around $180 to $240. Control board replacements run $300 to $600 installed depending on brand and model. Full opener replacement, including new arms, mounts, and safety system testing, typically runs $850 to $1,800. Gate welding repairs fall between $150 and $400. If the job needs new steel or a full gate panel, we will write the exact number first. Every Calder Gate Repair customer receives a written price before any work starts. Call (903) 417-0793 for a free estimate, and the number we quote is the number you pay.
We Also Serve Cities Near Houston
Calder Gate Repair serves Houston and the surrounding communities, including Galena Park, Pasadena, Channelview, and South Houston. If your gate is stuck open or failing to close in any of these areas, our Gate Repair team can reach you fast. For anything related to Gate Repair in Houston, the same written-price guarantee and 365-Day Done Right Promise apply.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Houston
Because the panel was probably never the problem. Houston’s expansive clay soils shrink and swell, which shifts the hinge post footing out of plumb. The post leans, the gate sags, and welding the panel straight just transfers the stress to the next weld. The permanent fix is re-setting or replacing the post and re-hanging the leaf. Call (903) 417-0793 and we will confirm what is actually moving before we touch a welder.
Yes, every automatic gate in Houston must have working safety edges or photocells, and they must reverse the gate on contact or obstruction. A gate that moves people and pets is a real hazard if those sensors fail, especially on a driveway gate near a sidewalk or a backyard gate where kids play. We test the full reversing system on every repair and will not sign off on a gate that does not reverse properly.
More often in Houston it is the rail and the operator moving out of alignment, not the motor dying. Clay soil movement heaves the driveway slab, the rack and pinion mesh tightens or slips, and the operator works against the misalignment until it trips. We had a call from the Heights where a LiftMaster slide gate was grinding because the pad had heaved during a dry spell. Re-pouring and re-leveling the post footing and re-shimming the operator fixed it. If the operator is actually burned out, we will tell you after testing, with the repair cost in writing.
No, and you should be wary of anyone who says yes. A proper gate installation in Houston means footings accounted for expansive clay, a power run or solar solution, safety edges and reversal testing, and a controlled operator setup. That is measured, ordered, and scheduled work, not a same-day job. We will come out, measure, and give you a written quote for the full install, and then we schedule the work at a time that does not leave your property unsecured.
Calder Gate Repair services LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which covers almost every residential gate opener in Houston. Our techs are trained on all nine brands. No matter what opener sits in your gate box, we can diagnose it, quote the repair, and do the work with the right parts.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Houston with written price guarantees and the 365-Day Done Right Promise.