Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across South Houston
When a gate stops opening in South Houston, you need a tech who knows the soil here, not just the opener brand. Most gate repairs in South Houston run $150 – $350 before parts, and our crews can usually be on site within hours, not days. Calder Gate Repair has been fixing swing gates, slide gates, and automatic openers across South Houston since our founding in 2009, so we know what the clay does to posts and what the humidity does to circuit boards. Call (903) 417-0793 and a live person answers, 24/7.
Why Calder Gate Repair Is South Houston’s Preferred Gate Repair Company
South Houston homeowners call us because we show up with a written price before any work starts. Our techs are background-checked and uniformed, and you get a live, trackable arrival time, so you’re not stuck waiting through a four-hour window. We work on gates along Spencer Highway, in neighborhoods around Beverly Hills Park, and near South Houston High School. Familiarity with those streets matters: the older steel tube gates on Spencer Highway face different failures than the newer ornamental iron on the subdivision lots nearer College Park.
Every repair carries the 365-Day Done Right Promise. If the repair fails within 365 days, Calder returns at no charge, period. That promise is in writing on every job, and it’s not optional. Nico Alvarez leads our Houston dispatch, and every tech follows the Relay Standard: live arrival time, before-and-after photos, and a digital invoice you pay from a link. No phone tag, no vague “we’ll be there sometime this afternoon.”
Iron Gate Repair in South Houston
Iron Gate Repair in South Houston usually means one of two things: a sagging swing panel whose hinge post has moved in the clay, or rusted-through bottom rails that finally snapped. We see both often. A typical iron gate repair in South Houston runs $180 – $420 depending on whether the post needs to be excavated and re-poured, or whether the panel can be reinforced and re-hung on the existing footings. Every price is agreed in writing before we touch a bolt.
Post Footing Excavation and Reset
When an iron gate drags, most companies straighten the panel and call it fixed. That’s why the sag comes back. In South Houston, we dig down to the footing, check whether it’s tilted or undersized, and re-pour with a belled bottom so the post resists the clay’s shrink-swell cycle. The gate then swings clean through its full arc.
Rust Repair and Reinforcement
Gulf humidity eats unprotected iron. We cut out rotted sections of bottom rail, weld in new steel, and then coat the repair so it doesn’t re-rust within a year. If the hinges are worn oval, we replace them while the panel is off, saving you a second service call.
Sliding Gate Repair in South Houston
Sliding Gate Repair in South Houston tends to involve the track and the rack. Our heavy rains wash grit into the track, and a gate that worked fine in spring will start binding in August. Expect to pay $190 – $450 for a typical sliding gate repair here, which includes clearing and realigning the track, resetting the rack-and-pinion mesh, and re-testing the opener’s force settings. Like every job, the written price is in your hands before work begins.
Track Cleaning and Rack Realignment
A binding slide gate is usually a misaligned rack, not a dead motor. We reset the pinion mesh, clean debris from the track, and apply a dry lubricant that won’t attract more grit. The gate should roll with one hand before we even touch the operator.
Opener Reprogramming and Limit Reset
If your slide gate slams or stops short, the limit switch, which is the sensor that tells the gate where to stop, has likely drifted. We reprogram limits, check the force sensitivity, and run a full reverse-on-contact test so the gate stops and reverses if it hits anything.
Trusted Brands We Service in South Houston
Our techs are factory-familiar with nine major brands, and that matters when your opener is ten years old and the control board has been discontinued. We regularly service LiftMaster, Linear, Viking, Ghost Controls, DoorKing, FAAC, BFT, Elite, and Mighty Mule units across South Houston. Because we stock local parts for Linear and Viking slide operators, which are common on older South Houston properties, we can often complete a board or limit switch swap in a single visit rather than waiting on a shipped part.
Common Gate Repair Problems We See in South Houston Homes
- Expansive clay shifting hinge posts: South Houston’s dense, slow-draining clay swells after Gulf rains and shrinks in dry spells. That cycle tilts shallow footings, and the gate starts dragging even though the panel was just straightened.
- Slide tracks fouled with wet grit: Rain washes sand and clay onto the track, and the humid season keeps it sticky. The gate binds, the motor strains, and the rack teeth wear unevenly.
- Missing or dead UL 325 entrapment protection: Older automatic gates throughout South Houston were installed before photo-eyes were standard, or the sensors have failed. The operator runs blind and won’t pass a safety reversal test.
- Control board failures from humidity and surges: Thunderstorms bring power surges, and our coastal Gulf humidity corrodes solder joints over time. We replace boards and hard-wire surge protection where it’s needed.
Pricing for Gate Repair in South Houston, TX
South Houston pricing is straightforward. A broken hinge or sagging post runs $180 – $320. A slide gate track realignment and rack reset runs $190 – $450. An opener board or limit switch swap runs $150 – $300 before parts, and full operator replacement starts around $500 for a basic residential unit, installed with UL 325 safety testing. The factors that move the number: post excavation depth, panel weight, opener brand, and whether we’re reusing your existing photo-eyes. The price is quoted and agreed before any work starts, and the invoice won’t surprise you. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near South Houston
Our Gate Repair crews work throughout the southeastern metro. If you’re in Pasadena, Galena Park, Deer Park, or Pearland, the same team handles Gate Repair in South Houston and surrounding communities. You get the same written pricing, the same live arrival tracking, and the same 365-Day Done Right Promise.
Serving South Houston, TX - Our Local Coverage Area
We’re based in the South Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in South Houston
Because the problem is almost never the panel in South Houston. The dense clay under your post absorbs Gulf rain, swells, and then shrinks in dry weather. A shallow footing tilts in that cycle, dragging the gate down. Straightening the panel is cosmetic. The fix is excavating the hinge post and re-pouring a belled concrete footing that resists the movement. We do this regularly on lots near Beverly Hills Park and along Spencer Highway. Call (903) 417-0793 and we’ll dig it out properly.
No. Automatic gate operators in South Houston must have UL 325 compliant entrapment protection, which means photo-eyes, edge sensors, or both. An operator that runs without them is a safety liability and won’t pass a reversal test. If your older gate is missing its sensors, we can retrofit photo-eyes and a reversing edge to bring it into compliance.
No, and you should be wary of anyone who promises that. A proper sliding gate operator install in South Houston means a new concrete pad for the motor, running power to it, mounting the rack, installing UL 325 photo-eyes and edge sensors, and then testing reverse-on-contact. That’s measured and scheduled work, not a lunchtime job. We’ll give you a written price and a firm install date instead of a rushed same-day promise.
Our techs carry parts and training for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Linear and Viking slide operators are particularly common on older South Houston properties, so we keep those boards and limit switches stocked locally. If you’re not sure what you have, snap a photo of the control board and we’ll identify it over the phone.
Yes. Solar openers work well in South Houston because we get enough Gulf sun to keep a panel charged, and a solar unit avoids the cost of running buried conduit from the house to the gate. We mount the panel, wire the battery, and install the same UL 325 photo-eyes and edge sensors as any other automatic gate. Expect a written quote that covers the panel, battery backup, operator, and safety testing before anything is ordered.
Get Your South Houston Gate Fixed Today
If your gate is dragging, grinding, or dead, call Calder Gate Repair at (903) 417-0793. A live person answers any hour, gives you a straight price range, and schedules a background-checked tech with a trackable arrival time. Every job carries the 365-Day Done Right Promise and a free second visit if the repair fails. Written price first, local expertise from the first call.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family since 2009.