Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pasadena
A gate that won’t open or close properly in Pasadena is more than an inconvenience. It’s a security gap on your property and a daily fight with a stubborn slab of metal. Most gate repairs in Pasadena run between $185 and $480 before parts, depending on what failed, and our crews routinely reach homes across the city the same day a call comes in. We know the streets here, from the older blocks off Richey to the newer subdivisions further south, and we carry parts for both residential swing gates and the heavier slide gates that show up near the industrial corridors. Call (903) 417-0793 when a gate stops cooperating, and a live person answers.
Why Calder Gate Repair Is Pasadena’s Preferred Gate Repair Company
We’re the gate repair specialist inside the Relay Home Co. family, founded in 2009, and our Pasadena work runs on the same three guarantees every customer gets on paper: a written price before work starts, a written guarantee on every repair, and a free second visit if the fix fails within 365 days under the Done Right Promise. That matters here because Pasadena’s soil and humidity push gates harder than average, and you shouldn’t have to pay twice to fix the same sag.
Our technicians are background-checked, uniformed, and dispatched with a live arrival time you can track from your phone. No four-hour windows, no waiting around. When we say someone is on the way to Pasadena, you’ll see exactly when they’ll pull up. We also answer calls with a real person 24/7, so a gate failure at 11 p.m. on a Sunday doesn’t mean leaving a voicemail and crossing your fingers.
Local knowledge counts here. Pasadena’s older residential blocks and industrial-canal belt present very different gate problems, and a crew that only does residential swing gates won’t be much help at a yard near the Ship Channel. Our team carries both commercial and residential parts on the truck, so the first visit is usually the last one.
Wrought Iron Gate Repair in Pasadena
Wrought iron gate repair in Pasadena typically runs $220 to $620 depending on what’s gone wrong. The most common failures we see are sagging panels, broken or seized hinges, rust-through at the bottom rail, and latch misalignment that leaves a gate that looks closed but doesn’t actually secure. Pasadena’s older homes, particularly in neighborhoods developed in the 1950s through 1970s, often have original ironwork that’s now sixty to seventy years old. The soil movement underneath has been working against those posts for decades.
Hinge and Post Realignment
When an iron gate sags, the panel is rarely the root cause. The post has usually shifted in Pasadena’s expansive clay, and simply tightening hinge bolts won’t hold for long. We re-set the footing, weld fresh hinge plates where needed, and re-hang the gate so it latches square. That’s the difference between a repair that lasts a season and one that lasts years.
Welding and Rust Repair
Houston-area humidity and Pasadena’s proximity to the Ship Channel means salt-tinted air reaches further inland than people expect. Bottom rails and post bases corrode from the inside. We cut out the compromised metal, weld in new material, and coat the repair so it blends and holds. A proper patch on a wrought iron gate in Pasadena usually costs $150 to $400 per section, depending on how much metal has to be replaced.
Metal Gate Repair in Pasadena
Metal gate repair in Pasadena covers everything from aluminum residential gates to heavy steel slide gates at commercial properties. A residential aluminum gate repair usually runs $185 to $450. A steel slide gate with a rack and pinion drive at a commercial yard is a different job entirely, often $500 to $1,200 depending on the drive system and the access control tied to it. Pasadena’s mix of housing stock and industrial yards means we see both ends of that range in a single week.
Slide Gate Track and Roller Service
Slide gates near Pasadena’s industrial corridors collect debris, rust, and grime faster than residential swing gates. Rollers wear flat, tracks bend, and the gate starts stuttering or binding mid-travel. We replace rollers, re-bed tracks, and re-align the drive system so the gate moves smoothly instead of fighting its own hardware. If the motor is struggling, we check the rack and pinion mesh before condemning the operator, because a misaligned rack will burn out a good motor.
Frame and Post Stabilization
Clay soil movement in Pasadena doesn’t just affect iron gates. Steel and aluminum frames shift too, pulling latches out of alignment and stressing weld joints. We re-set posts with proper footings, shim and re-align the frame, and test the full travel under load. This is the fix that stops a gate from slowly returning to its sagged position month after month.
Trusted Brands We Service in Pasadena
Our technicians are factory-familiar with nine major gate opener brands, and on Pasadena jobs we regularly work on Viking, Ghost Controls, and DoorKing systems. Viking units are common on the larger slide gates around Pasadena’s industrial lots, and we keep the boards and limit switches for those on our trucks. Ghost Controls and DoorKing show up constantly on residential swing gates across the city, and we stock the common replacement parts locally so there’s no week-long wait when a control board dies. If your opener is from a brand we didn’t name, call anyway. If it opens a gate in Pasadena, we’ve almost certainly worked on it.
Common Gate Repair Problems We See in Pasadena Homes
- Clay soil shifting hinge posts: Pasadena sits on expansive clay that swells when wet and contracts in dry stretches. This slowly tilts gate posts, which is why a gate that sagged last spring will often sag again after the next heavy rain if the post wasn’t actually re-set. Tightening hinges is a temporary fix; stabilizing the footing is the repair.
- Corrosion near the Ship Channel: Homes and yards in the northern and eastern parts of Pasadena get more salt-tinged humidity than neighborhoods further south. Control boards develop intermittent faults, wiring connections corrode, and steel hardware rusts faster. We use sealed connectors and corrosion-resistant hardware on jobs near the industrial belt and Bay Area Boulevard corridor.
- Entrapment protection failures on older automatic gates: Many Pasadena automatic gates installed before the current UL 325 standards have missing or misaligned photocells and edge sensors. The gate doesn’t reverse when it meets resistance. That’s a serious safety problem, and we test every gate we touch to confirm it reverses properly before we call the job done.
- Operator motor burnout from misaligned gates: When a sagging gate drags on the ground or a slide gate roller is seized, the operator motor has to work harder every cycle. That shortens its life and eventually burns it out. We see this constantly on older Pasadena properties where the gate has been sticking for months and the owner hoped it would settle back into place. It won’t.
Pricing for Gate Repair in Pasadena, TX
Here are the ranges we quote most often in Pasadena. A basic residential swing gate realignment runs $185 to $320. Replacing a hinge or latch on a wrought iron gate is usually $150 to $350. Operator repairs, including new circuit boards or limit switches, land between $225 and $520 before parts, and full operator replacements on residential gates typically run $650 to $1,400 depending on brand and horsepower. Commercial slide gate work near the Ship Channel starts around $500 and climbs from there. Every job gets a written price before any work starts, and the invoice matches that number exactly.
We Also Serve Cities Near Pasadena
Our Gate Repair crews cover Pasadena and the surrounding communities, including South Houston, Galena Park, Deer Park, and Channelview. If your property sits near the city line or you manage multiple gates across the area, one call handles all of it. Learn more about how we serve the region on our Gate Repair in Pasadena page.
Serving Pasadena, TX - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pasadena
Because the hinge post has likely shifted in Pasadena’s expansive clay soil, not because the hinges are loose. Every time the ground cycles through wet and dry seasons, the post tilts a little further. Tightening hinge bolts doesn’t fix the footing. The repair that lasts is re-setting the post in a proper concrete footing, then re-hanging the gate square. Call (903) 417-0793 and we’ll tell you exactly what’s moving and what it costs to fix.
Yes. Under UL 325 standards, automatic gates must have entrapment protection that reverses the gate when it encounters a person, vehicle, or object. That means working photocells and, on many gates, edge sensors. Older Pasadena gates often have sensors that are misaligned or disconnected entirely, which is a safety hazard. We test every gate we repair to confirm it reverses properly.
Yes. We carry commercial parts for rack and pinion slide gate systems, including Viking and DoorKing operators, and we regularly service yards along the industrial corridors near the Ship Channel and Bayport. These gates take more abuse from humidity, debris, and daily cycling than residential gates, so we replace rollers, re-bed tracks, and check rack mesh before condemning a motor. Call for a dispatch and written quote.
Most residential repairs are completed in one to three hours on site. Hinge re-alignment, latch replacement, and operator board swaps are typically same-visit jobs. Post re-setting and major weld work can take longer, especially if new concrete needs cure time before the gate is re-hung. We’ll give you a clear time estimate with your written price, and you’ll know before we start.
A proper installation includes concrete footings sized for the gate’s weight and Pasadena’s clay soil, a power run from your panel to the operator, entrapment protection devices that meet UL 325, and full travel and reversal testing. This is measured, ordered, and scheduled work, not a same-day job. We provide a free measure and a written installation price before anything is ordered.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Pasadena and the surrounding Houston area with gate repair since 2009.