Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Pinehurst, TX
Calder Gate Repair is the gate company Pinehurst homeowners call when a driveway gate stops responding, a keypad goes dead, or an opener starts grinding. Most repair jobs in Pinehurst run between $180 and $340 before parts, and we quote every price in writing before the first bolt comes off your gate. If you’re dealing with a gate that won’t open, call (903) 417-0793 and a live person answers, day or night.
Pinehurst sits in Montgomery County with a mix of older ranch-style homes, newer acreage properties, and a handful of gated entrances along FM 1774 and 149. That variety means the gate repair work here spans everything from simple chain-link driveway gates to heavier ornamental steel setups with electric openers. Nobody should wait through a voicemail for that kind of problem.
Why Pinehurst Homes Are Different
Pinehurst jobs tend to involve gates that have been through at least ten summers of Montgomery County heat and humidity. The area’s clay-heavy soil shifts with the seasons, which puts real stress on gate posts and hinges. A gate that swung perfectly in January can start dragging on the latch by August, because the post has moved a quarter inch and nobody noticed until the opener started laboring. That’s the kind of problem we see regularly in Pinehurst, and it’s usually a hinge adjustment or post shim rather than a full opener replacement.
Another Pinehurst-specific pattern is power. A lot of the properties here run long electrical stretches from the house to the gate, especially on the larger lots off Brown Cone, Vance, and Old Houston Road. Long low-voltage runs are more vulnerable to voltage drop, and heat-soaked capacitor failure in older opener control boards is a common call in mid-summer. We also see plenty of properties with older chain-driven Viking and Gatecraft units that were installed when the neighborhoods off 149 were first developed, and those units simply weren’t built to handle today’s heavier gate panels. When we show up, we’re expecting to work around these Pinehurst realities, not discover them on your dime.
Our Main Pinehurst Services
Homeowners in Pinehurst call us about three things more than anything else: a gate that won’t move, a gate that moves but has electrical or sensor problems, and an opener that’s failed outright. Each one has its own dedicated page below.
Gate Repair in Pinehurst
When a gate drags, sags, or won’t latch, the cause is usually mechanical: a bent hinge, a shifted post, or a wheel track packed with Pinehurst clay. We inspect the full swing path, weld or replace broken hardware, and realign the gate so it closes cleanly. A sticking gate on an older Pinehurst driveway gate is often the first warning sign that something worse is coming, so we’d rather catch it before the opener burns out fighting the extra friction. Read the full breakdown and our process at Gate Repair in Pinehurst.
Electric Gate Repair in Pinehurst
Electric gates around Pinehurst fail for reasons mechanical gates don’t: photo eye misalignment, bad limit switches (the small sensors that tell the gate when to stop), chewed low-voltage wiring, or a transformer that’s given up. These systems run through rain and heat all year, and even a small voltage issue can stop the whole thing. We trace the circuit, test every component, and replace only what’s actually failed. If your gate opens partway and reverses, that’s usually a limit switch, not the motor. Details are on the Electric Gate Repair in Pinehurst page.
Gate Opener Repair in Pinehurst
If the gate hardware is fine but the opener won’t respond to the remote, keypad, or wall button, the opener itself is the problem. Most opener repairs in Pinehurst cost $190 to $310 before parts. We work on LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and the other brands common in Montgomery County, and we stock boards, remotes, and receivers so turnaround stays fast. You’ll get a written price before we touch anything. See Gate Opener Repair in Pinehurst for the full scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Pinehurst
We’re factory-familiar with nine major opener brands, and in Pinehurst the ones we see most are Viking, Ghost Controls, DoorKing, and Elite. We keep common boards, remotes, and safety sensors stocked locally so a repair is often same-visit. See how we handle each one on our brands page.
Pricing for Gate Company in Pinehurst, TX
| Service | Typical range in Pinehurst |
|---|---|
| Diagnostic service call | $89 – $129 |
| Gate opener repair | $190 – $310 before parts |
| Limit switch replacement | $130 – $190 |
| Photo eye sensor replacement | $120 – $180 |
| Remote or keypad programming | $65 – $110 per unit |
| Capacitor replacement | $110 – $170 |
| Control board replacement | $220 – $380 before parts |
| Chain or belt replacement | $160 – $260 |
| Wheel, roller, or hinge replacement | $120 – $220 |
| Gate alignment and latch adjustment | $100 – $175 |
What pushes a Pinehurst repair higher is usually access: gates set far back from the road, long power runs, or hardware corroded by Montgomery County humidity. Whatever the job, the number we quote before starting is the number you pay. No surprise line items, no invoice that shows up bigger than the estimate.
Neighborhoods We Serve in Pinehurst
We cover all of Pinehurst, from the older streets off FM 1774 to the larger lots along 149 and the neighborhoods branching off Brown Cone, Vance, and Old Houston Road. Most Pinehurst calls get a same-day or next-day visit, depending on the problem.
- Pinehurst Village and streets off 149
- Brown Cone and Vance Road areas
- Old Houston Road corridor
- Properties along FM 1774 toward Magnolia
- Larger acreage lots east of town
Service Area – Cities Near Pinehurst
Calder Gate Repair works throughout the Montgomery County area and nearby communities. If you’re just outside Pinehurst, we also serve Tomball, TX, Conroe, TX, Spring, TX, and Willis, TX. Same written pricing, same live person answering 24/7.
Serving Pinehurst, TX - Our Local Coverage Area
We’re based in the Pinehurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pinehurst
Most Pinehurst calls are scheduled same-day or next-day. If it’s an emergency and your gate is stuck open, call (903) 417-0793 and a live person will give you a trackable arrival time, not a four-hour window. We dispatch Pinehurst jobs locally.
In most Pinehurst subdivisions, repairs that match the existing gate and opener don’t require approval. If you’re replacing an opener or changing the gate’s appearance, check with your HOA first. We can provide a written summary of the work if they ask for one. We never file permits on your behalf, but we’ll tell you plainly if a project looks like it needs one.
That’s common in Pinehurst, especially on homes built before 2010. We identify the unit on site and stock parts for the brands most common here: Viking, Ghost Controls, DoorKing, Elite, and several others. You won’t pay for a wrong guess. Call (903) 417-0793 and we’ll sort it out.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pinehurst Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.