Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Willis, TX
Calder Gate Repair is the gate company Willis homeowners call when a driveway gate stops cooperating. We work on every part of the system: the opener, the electrical run, the hinges, the wheels, the safety sensors, and the gate itself. Most repair calls in Willis get a same-day visit, and you will always know your exact price before we touch a bolt. If your gate is stuck open, stuck closed, or grinding its way somewhere in between, call (903) 417-0793 and a live person answers, day or night.
Why Willis Homes Are Different
Willis sits just north of Conroe along I-45, and the housing mix tells you a lot about what kind of gate work shows up here. There are acreage properties with long driveway runs and solar-powered openers, newer subdivisions with ornamental steel gates on brick columns, and older ranch-style homes where gates were added years after the house was built. That last group is the one we see most: gates mounted to posts that were never quite square, with wiring pulled through conduit that has since filled with water or been chewed through by squirrels.
The climate plays a role too. Willis summers are hot and humid, and spring storms push heavy rain through Montgomery County. Heat kills opener circuit boards faster than almost anything else, and moisture gets into limit switches and capacitor housings. A gate that works fine in February can fail in August because a solder joint finally gave up. We also see a lot of gate posts leaning after wet seasons, because the soil here shifts. When we quote a repair in Willis, we factor in the local conditions: clay-heavy soils, storm exposure, and the kind of long gravel drives that make a dead opener a five-minute walk instead of a thirty-second one.
Our Main Willis Services
Most Willis homeowners reach out for one of three things: a gate that won’t move, an electrical problem that tripped a breaker or fried a board, or an opener that’s doing something strange. Each service has its own page with details on pricing, brands, and what to expect.
Gate Repair in Willis
A gate that drags, binds, sags, or stops latching is usually a mechanical problem: worn wheels, bent hinges, a post that has shifted, or a chain that has stretched past adjustment. In Willis, we regularly find gates that were hung on posts set without enough concrete for the soil conditions, and after a few wet seasons the whole assembly has tilted. We straighten, reinforce, replace hardware, and adjust travel so the gate closes fully every time. The job starts with a written quote and ends with the Gate Repair in Willis page’s pricing guide and the 365-Day Done Right Promise behind the work.
Electric Gate Repair in Willis
When a gate is dead at the keypad but the opener still hums, or a breaker trips every time the gate tries to move, you have an electrical problem. In Willis, we trace low-voltage wiring, replace corroded connections, diagnose failed photo eyes, and repair or replace control boards. Storms here are hard on outdoor electrical, and so are the ants that love to nest inside opener housings. We test the full circuit, not just the part that failed, and we tell you exactly what failed and why. See Electric Gate Repair in Willis for detailed pricing and what a typical diagnosis includes.
Gate Opener Repair in Willis
If the gate works manually but not with the remote, the keypad, or the app, the opener is the likely culprit. That could mean a failed capacitor, a stripped gear, a blown control board, or a receiver that has lost its programming. We work on openers from nine major brands, so we rarely have to tell a Willis customer their only option is a full replacement. Our techs arrive with common boards, remotes, and safety edges on the truck. The Gate Opener Repair in Willis page covers the brands, the symptoms, and what each repair typically runs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Willis
We are factory-familiar with Linear, Viking, Ghost Controls, and DoorKing, plus several other leading opener brands. Our techs keep common boards, remotes, and safety edges stocked on the truck, so many Willis repairs finish in a single visit. See our brands for the full list and what we stock for each.
Pricing for Gate Company in Willis, TX
| Service | Typical range in Willis |
|---|---|
| Diagnostic visit (credited to repair) | $49 – $99 |
| Gate opener repair | $190 – $420 before parts |
| Control board replacement | $280 – $600 including board |
| Photo eye / safety sensor repair | $130 – $240 |
| Limit switch replacement | $150 – $270 |
| Gate opener installation | $650 – $1,500 including opener |
| Gate wheel / roller replacement | $120 – $300 per wheel |
| Hinge replacement (each) | $90 – $220 |
| Post reinforcement or re-setting | $300 – $850 |
| Gate track repair or alignment | $180 – $480 |
What pushes a Willis job toward the top of these ranges is usually access and age: a gate at the end of a 500-foot drive with no power outlet nearby takes longer to diagnose and repair than one ten feet from the house. Older gates with corroded hardware and patchy wiring also tend to need more parts. Whatever the number, you get it in writing before any work starts, and the invoice matches the quote.
Neighborhoods We Serve in Willis
We cover the full Willis area, from the neighborhoods around Lake Conroe to the more rural stretches east and west of I-45. Response time for most Willis calls is same-day when you call before mid-afternoon, and next-morning otherwise.
- Seven Coves
- Lake Conroe Hills
- The Woodlands Hills
- Browder Addition
- Silver Hills
Service Area – Cities Near Willis
Calder Gate Repair is based in the Dallas-Fort Worth metro and dispatches local crews to Willis and the surrounding area. If your property sits near the edge of Willis, we also serve Conroe, TX, Pinehurst, TX, Tomball, TX, and Spring, TX. Scheduling works the same everywhere: a live person answers, and you get a trackable arrival time.
Serving Willis, TX - Our Local Coverage Area
We’re based in the Willis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Willis
Most Willis calls placed before mid-afternoon get a same-day visit. Emergency calls after hours go to a live dispatcher, not a voicemail, and we will tell you the soonest available arrival time on the spot. Call (903) 417-0793 for a real answer in under a minute.
Repairs that restore the existing gate and opener without changing appearance generally do not trigger HOA review. If the work changes the gate’s color, height, or materials, your HOA may need notice first. We will tell you which side your job falls on before you schedule.
Yes. We serve the full Willis area including Seven Coves, Lake Conroe Hills, and the rural roads east and west of I-45, plus nearby cities like Conroe and Tomball. If you are unsure whether you are in range, call (903) 417-0793 and we will confirm it while you are on the line.
Calder Gate Repair is led by Nico Alvarez and backed by the Relay Home Co. family, founded in 2009. Every Willis job includes a written price before work starts, a written guarantee on the repair, and a free return visit if the repair fails within 365 days. Call (903) 417-0793 and talk to a real person who can get your gate moving again.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Willis Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.