Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Cleveland, TX
Calder Gate Repair is the gate company Cleveland homeowners call when a gate won’t open, a keypad goes dark, or a motor grinds and stops. Most gate repairs in Cleveland run between $150 and $600 depending on what failed, and we quote that price in writing before any work begins. Cleveland’s mix of country properties along FM 2025 and newer subdivisions off Highway 59 means gates here work harder than most: they open more times per day, catch more east Texas weather, and sit further from the house when something breaks. If your gate isn’t cooperating, call (903) 417-0793 and a live person will answer.
Why Cleveland Homes Are Different
Cleveland sits at a geographic crossroads. The west side of town runs into the Sam Houston National Forest, where lots are bigger, drives are longer, and gates are often the only thing between the property line and a county road. The east side trends toward newer planned subdivisions where HOAs set rules about gate height, color, and sometimes even the opener brand you can use. Neither setup is wrong, but they fail differently.
Heat and humidity do most of the damage here. A gate opener mounted on a west-facing post in Cleveland gets baked for hours each afternoon from May through September. Control boards overheat. Capacitors swell. Solar panels on older Mighty Mule and Ghost Controls units lose efficiency as dust from the construction traffic on Highway 105 settles on the glass. And when a summer thunderstorm rolls through, a ground strike can fry a board in seconds. We carry spare boards and capacitors for the brands Cleveland actually uses, so most repair calls happen in one visit.
Our Main Cleveland Services
Gate Repair in Cleveland
A gate that drags, binds, or won’t close all the way is a security problem, not just an annoyance. In Cleveland, where long driveways mean a stuck gate can leave your whole property exposed to the road, we treat gate repair as urgent. We fix bent hinges, realign sagging leaves, replace worn rollers, and repair cracked welds. We also handle the structural side of automated gates, including posts that have shifted in Cleveland’s clay-heavy soil after a wet spring. Gate Repair in Cleveland covers everything from the hinge to the latch.
Electric Gate Repair in Cleveland
Electric gates fail for predictable reasons: a tripped breaker, a shorted low-voltage wire, a sensor knocked out of line by a mower. Cleveland’s frequent afternoon storms add lightning risk to that list, and we replace more surge-damaged control boards here than in drier parts of the county. When you call, we ask for the symptom, the brand, and the age of the unit before we dispatch, so the technician arrives with the right parts. Electric Gate Repair in Cleveland covers power, wiring, sensors, and control boards.
Gate Opener Repair in Cleveland
If the opener hums but the gate doesn’t move, the problem is usually mechanical: a stripped gear, a broken chain, a seized bearing. If the opener is silent, it’s usually electrical. Cleveland’s humidity accelerates corrosion on exposed terminals and battery connections, especially on solar-powered openers that lose their charge overnight. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units, and we stock the failure-prone parts for each. Gate Opener Repair in Cleveland covers motors, limit switches, remotes, and keypads.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Cleveland
Cleveland gates run on a wide mix of opener brands. FAAC and BFT hydraulic units are common on the heavier wrought-iron gates in older custom homes. Linear and Viking operators turn up more often on subdivision entry gates and light commercial jobs. We keep boards, remotes, photo eyes, and capacitors stocked locally for these brands and five others. See our brands for the full lineup.
Pricing for Gate Company in Cleveland, TX
| Service | Typical range in Cleveland |
|---|---|
| Gate opener repair | $150 – $450 before parts |
| Electric gate repair | $175 – $600 before parts |
| Gate repair (mechanical) | $150 – $550 before parts |
| Control board replacement | $225 – $650 before parts |
| Limit switch replacement | $95 – $220 |
| Photo eye sensor replacement | $85 – $200 |
| Remote or keypad programming | $65 – $150 |
| Gate realignment or sag correction | $150 – $400 |
| Hinge replacement | $120 – $300 |
| Emergency gate release repair | $100 – $250 |
Two things push Cleveland pricing toward the higher end of these ranges: long rural driveways that require more wire and labor, and HOA-specified parts in newer subdivisions that cost more than standard equivalents. Whatever the number is, you get it in writing before we start, and that number does not change at the door.
Neighborhoods We Serve in Cleveland
Cleveland’s gate work spans a few distinct areas, each with its own patterns. We dispatch locally, and most Cleveland calls get a technician the same day or next morning.
- Colony Ridge
- Sam Houston Lake Estates
- Santa Fe
- Plum Grove
- Everitt Road corridor
Service Area – Cities Near Cleveland
If you’re just outside Cleveland, we still have you covered. Our technicians regularly run routes through Conroe, TX, Humble, TX, Spring, TX, and Willis, TX. Dispatch and scheduling are coordinated from the brand’s Houston office, but the crew you see at your gate is the same one we send across the Cleveland area.
Serving Cleveland, TX - Our Local Coverage Area
We’re based in the Cleveland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cleveland
Most Cleveland calls get a same-day or next-morning visit. Response depends on where your property sits relative to Highway 59 and what the issue is, but we always give you a live, trackable arrival time before the technician rolls, never a four-hour window.
Some newer subdivisions in Cleveland do require specific opener brands or safety features, especially on shared entry gates. If your HOA has a spec sheet, we’ll work to it. If they don’t, we’ll recommend whatever fits your gate and budget. Call (903) 417-0793 and we’ll help you sort it out.
Every time, with no exceptions. The price you approve before we touch the gate is the price on your invoice. If a repair fails within 365 days under our Done Right Promise, we return at no charge. That guarantee is written on every job in Cleveland.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cleveland Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.