Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Richwood, TX
Calder Gate Repair is the dedicated gate company serving Richwood, TX, and we handle everything from a sagging driveway gate to a full opener replacement. Richwood’s mix of suburban lots, salt air from the Gulf corridor, and summer storms means most of our jobs here come down to two problems: hinges and posts that have shifted in soft soil, and opener circuit boards that took a humidity beating. Every visit starts with a written price before we touch a single bolt, and you’ll always reach a live person at (903) 417-0793.
Why Richwood Homes Are Different
Gate work in Richwood rarely looks like the textbook version. The soil here shifts with every wet-dry cycle, so gates that were perfectly plumb five years ago now drag on the latch side or bind against the post. We see this most often on the larger, heavier tube-steel driveway gates common in newer Richwood subdivisions, where the gate itself is fine but the load has slowly migrated downhill. A tech who only replaces parts misses the cause.
Humidity is the second constant. Richwood sits close enough to the coast that opener control boards and limit switches corrode faster than they do 60 miles inland. We open a lot of panels to find green oxidation on terminals and relays that simply gave up. We stock sealed replacement boards and weather-rated connectors on our trucks for exactly this reason. Richwood summers also bring lightning, and a nearby strike through a gate’s low-voltage line is a common culprit behind a dead keypad or a receiver that stopped responding overnight.
Our Main Richwood Services
Most calls from Richwood homeowners fall into two buckets: the gate itself is physically stuck or leaning, or the opener runs but the gate won’t move correctly. Each service has its own Richwood page with full detail, pricing, and the same day availability where it applies.
Gate Repair in Richwood
When a gate won’t swing or slide, the cause in Richwood is usually buried at the post or the hinge, not the opener. We cut out rotted or shifted posts, re-weld broken hinge plates, and level the gate so it moves without dragging across the top of the drive. Clay-heavy Richwood soil is unforgiving to shallow footings, and re-setting a post correctly means pouring deeper than the original install. Read the full Richwood scope on our Gate Repair in Richwood page.
Electric Gate Repair in Richwood
Electric gates add the components that fail fastest in Richwood humidity: photo-eye sensors that fog up, loop detectors buried in the driveway, and the low-voltage wiring between the opener and the safety edges. We trace and replace those circuits rather than guessing, then test the full safety loop so the gate reverses on contact the way code requires. For a deep dive on what’s covered in Richwood, see Electric Gate Repair in Richwood.
Gate Opener Repair in Richwood
A Richmond gate opener that hums without moving, clicks repeatedly, or stopped answering the remote usually points to the motor capacitor, a worn drive gear, or a fried control board. We bench-test the opener, replace the failed component, and reprogram the remotes and keypad before we leave, never just swapping the whole unit on a guess. See Gate Opener Repair in Richwood for the full breakdown and on-truck parts list.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Richwood
Our techs are factory-familiar with FAAC, BFT, Linear, and Viking openers, plus the other five major brands we carry parts for. We keep the most common Richwood failure parts on the truck: control boards, capacitors, limit switches, and photo-eye sensors. See our brands page for the full compatibility list.
Pricing for Gate Company in Richwood, TX
| Service | Typical range in Richwood |
|---|---|
| Gate realignment (hinges, posts, leveling) | $180 – $380 |
| Hinge and post repair (re-weld or re-set) | $240 – $520 |
| Gate opener circuit board replacement | $210 – $440 |
| Motor capacitor replacement | $90 – $190 |
| Drive gear and limit switch service | $140 – $280 |
| Photo-eye sensor replacement | $80 – $170 |
| Keypad and receiver reprogramming | $70 – $140 |
| Full opener swap (parts included) | $620 – $1,140 |
| Service call and diagnosis | $59 – $99 |
In Richwood, expect the final number to move toward the top of range when the post is pulling out of soft ground or when lightning damage took out more than one component. Whatever the number, we hand you the written quote before the repair starts, and that’s the number on the invoice, never a surprise line item.
Neighborhoods We Serve in Richwood
We cover all of Richwood and the surrounding residential pockets, and our techs are typically at the gate within a few hours for repair calls. Same-day scheduling is common for opener faults and stuck gates, while full opener swaps we schedule at the day and time you pick.
- Richwood city center and older inner subdivisions
- Newer tube-steel communities along the west side
- Brazosport-adjacent residential streets
- Homes along FM 2004 and the surrounding ranchette lots
- Lake Jackson border streets and connecting cul-de-sacs
Service Area – Cities Near Richwood
If you’re outside Richwood proper, our crews also serve Houston, TX, Dallas, TX, and Fort Worth, TX through the Relay Home Co. dispatch network, plus San Antonio, FL. Each location operates independently with the same written-price and 365-day promise.
Serving Richwood, TX - Our Local Coverage Area
We’re based in the Richwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richwood
For a stuck gate or a dead opener, we’re usually at your Richwood home the same day, often within a few hours. Full opener replacements are scheduled for a time window you choose, not a vague all-day slot, and you’ll get a live, trackable arrival time before your tech pulls up.
If you’re in a Richwood community with a homeowners association, most allow repair work on an existing gate without advance approval, but a full replacement or a visible change like a new opener arm can require a quick submission. Call us at (903) 417-0793 and we’ll tell you what your specific HOA typically asks for.
Yes. We’re part of the Relay Home Co. family, founded in 2009, and each location is independently owned and operated. Every Richwood job includes a written price before work starts, a written guarantee, and a free return visit within 365 days if the repair fails.
When your gate stops opening in Richwood, call (903) 417-0793. A real person answers 24/7, sets the appointment, and sends a tech with the price agreed before the work begins. Dispatch and scheduling coordinate from the brand’s Dallas-Fort Worth office, and crews serve Richwood directly.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richwood Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.