Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Aubrey
Electric gate repair in Aubrey typically runs $185 – $420 before parts, and most opener failures we see are fixable in one visit. If your gate stopped opening, won’t stay closed, or reverses mid-cycle, you want a tech who knows the difference between a dead battery and a bad control board. Calder Gate Repair has crews serving Aubrey neighborhoods from Providence to ArrowBrooke every weekday. Call (903) 417-0793 and a live person answers, day or night.
Aubrey sits right on the line where Denton County suburbs meet open acreage, and that split shapes the repair work here. Newer subdivisions run mostly grid-tied LiftMaster and Linear operators. Unincorporated properties off Fishtrap Road and 1385 lean on solar gate openers because trenching power to the road costs more than the gate itself. We diagnose both sides of that line, and we write the price down before touching a single bolt.
Why Calder Gate Repair Is Aubrey’s Preferred Electric Gate Repair Company
We’re the dedicated gate repair arm inside the Relay Home Co. family, founded in 2009, and led by Nico Alvarez. Every Aubrey job gets a background-checked, uniformed technician with a live, trackable arrival time, not a four-hour window. You know who’s coming, when they’ll be there, and what the fix costs before work starts. That’s the Relay Visibility Guarantee, and it’s how we run every call in Aubrey.
Our Aubrey customers get the 365-Day Done Right Promise in writing on every repair. If the fix fails within a year, we return at no charge. No fine print, no prorated nonsense. That promise matters more out here because gate problems in Aubrey tend to be structural as often as electrical, and a repair that only addresses half the problem fails again inside six months. We’d rather fix the whole thing once.
Calls to (903) 417-0793 are answered by a real person 24/7. Not a chatbot, not a voicemail. Tell us the gate is stuck open and the dogs are out, and we’ll tell you exactly when we can be there.
Commercial Gate Operator in Aubrey
A Commercial Gate Operator in Aubrey is not the same job as a residential opener swap. Commercial work covers apartment complex gates along 380, HOA entries in Silverado and Winn Ridge, and any operator that runs more than a few dozen cycles a day. These are heavier units, often Linear or Viking, and they’re paired with loop detectors, safety edges, and sometimes keypad or telephone entry systems. Most commercial operator replacements in Aubrey run $1,600 – $4,200 installed, depending on duty cycle and whether existing conduit and loops can be reused.
When a Commercial Operator Is Beyond Repair
If the gearbox whines, the motor draws high amps, or the board shows decade-old corrosion, replacing the operator usually costs less than chasing intermittent failures. We quote the replacement as a fixed line item before any tear-out starts.
Safety Requirements on Commercial Gates
Commercial gates in Denton County must meet entrapment protection standards: monitored safety edges or photo eyes, proper reversal on contact, and compliant control inputs for fire access where required. We test all of it after install and give you a written record of the readings.
Automatic Gate Repair in Aubrey
Automatic Gate Repair in Aubrey covers the full operator system, not just the motor. When a gate hesitates, slams, or refuses to move, the fault can sit in the control board, the limit switches (the small sensors that tell the gate when to stop), the safety photocells, the remote receiver, or the hinges and post footings underneath. Typical automatic gate repair in Aubrey runs $185 – $420 for diagnosis and labor, with parts added only after you approve the written price. We never surprise you at the invoice.
Opener and Control Board Diagnosis
We’re factory-familiar with FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because a FAAC board fault looks nothing like a Linear limit switch failure, and guessing wrong doubles your bill. We test in sequence and show you what we found.
Safety Sensor and Loop Repairs
Driveway loops and photocells fail differently in Aubrey than in older cities. Fresh developments mean recent concrete work, and we regularly see loops nicked during driveway resurfacing or pull-through repairs. Water pooling at the apron after spring storms shorts the loop leads. The symptom is a gate that stops short or reverses for no visible reason, and the fix is usually a new loop saw-cut, not a new operator.
Trusted Brands We Service in Aubrey
We service the operators Aubrey homes actually have. That means a lot of LiftMaster units in Paloma Creek and ArrowBrooke, a solid run of Ghost Controls on rural acreage where solar panels keep the battery topped, and FAAC and BFT on custom iron driveway gates from Prosper to Denton. We keep common control boards, remote transmitters, and safety edge profiles stocked locally, so an Aubrey repair doesn’t wait on a ground shipment from California. If your opener is a Viking or a Linear on a commercial property, same coverage applies.
Common Electric Gate Repair Problems We See in Aubrey Homes
- Sagging swing gates and rotted hinge post footings. Aubrey’s clay soil expands and contracts hard through wet-dry cycles, settling post footings and throwing gate geometry off. The operator gets blamed, but the real fault is in the post, and we fix that before condemning a good motor.
- Solar opener batteries failing after freeze-thaw swings. January freezes followed by rapid warm-ups shorten cheap battery life on rural solar setups. The operator tries to run, stalls mid-cycle, and the owner thinks the board is dead.
- Buried low-voltage cable damage on acreage properties. Frost heave, mower blades, and old splices fail on unincorporated Denton County lots. The gate loses power intermittently and resets its limits, acting possessed.
- Loop detector and photocell faults after driveway work. Fresh resurfacing, fence replacement, even heavy delivery trucks crack buried loops. The gate stops short or reverses because the board thinks something is under it.
Pricing for Electric Gate Repair in Aubrey, TX
Most electric gate repair in Aubrey lands between $185 and $420 in labor, with common parts like remotes, photocells, and limit switches adding $40 – $180. A full control board replacement runs $280 – $650 depending on brand and board type. Solar battery replacements run $120 – $300. Full automatic gate installations on new Aubrey construction or rural acreage run $3,500 – $11,000, and that spread depends almost entirely on power: grid-tied is cheaper, solar with trenching or pole-mount panels is more. Every job gets a written quote before work starts, so the number you approve is the number you pay. Call (903) 417-0793 for a free estimate on your gate.
We Also Serve Cities Near Aubrey
Our Electric Gate Repair crews cover Aubrey plus the surrounding north DFW corridor. If you’re in Aubrey proper or nearby Frisco, Little Elm, Denton, or Prosper, call the same number and get the same written-price guarantee. Dispatch runs from our Dallas-Fort Worth office, with local crews routed daily through Aubrey.
Serving Aubrey, TX - Our Local Coverage Area
We’re based in the Aubrey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Aubrey
The operator is usually fine. What’s wrong is the gate geometry: a rotted or settled hinge post footing, a torn hinge, or a gate that’s too heavy for the operator it was paired with. We correct the structure first, then re-test the operator’s force settings and safety reversal. Call (903) 417-0793 and we’ll tell you if it’s a $300 post repair or a full replacement before you commit.
Yes. Most rural acreage gates off Fishtrap Road and 1385 use solar panels paired with deep-cycle batteries, and we install those as complete systems. The tradeoff is real, so we tell you upfront: solar works reliably here if the panel is sized for our shortest winter days and the battery is rated for freeze-thaw cycling. Cheaper solar kits fail in Aubrey winters. We also run low-voltage trenching when power is close enough to justify it.
No, and we’d be lying to you if we said otherwise. A proper automatic gate installation involves footings, groundworks, power runs or solar, safety edges, and reversal testing. That’s measured, ordered, and scheduled, usually over 1 – 3 days. What we do offer same-day is diagnosis and repair on existing operators. For a new install, call (903) 417-0793 for a free measure and a written price.
We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Aubrey specifically, we see mostly LiftMaster and Linear on grid-tied subdivision homes, Ghost Controls and Mighty Mule on solar acreage setups, and FAAC or BFT on custom iron gates. Bring us any of them and we’ll have the right diagnostic path.
Yes, on any gate installed after the UL 325 standards took effect, and honestly, on any gate you want to keep. That means working photo eyes or contact safety edges, plus a control board that auto-reverses when it senses obstruction. We test entrapment protection on every Aubrey repair visit and include the results in your written service record. It’s not optional, and we won’t clear a gate without verifying it.
If your gate is acting up in Aubrey, call Calder Gate Repair at (903) 417-0793. You’ll get a live person, a real arrival time, and a written price before any work begins.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family, serving Aubrey residents with electric gate repair since 2009.