Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Frisco
An electric gate that won’t open isn’t just a broken opener. In Frisco, it’s usually a marriage of two problems: a failed component and the Blackland Prairie clay moving the very ground the gate hangs on. We’re Calder Gate Repair, and this is what we do every day across Frisco through our Gate Repair in Frisco. We repair gate motors, openers, keypads, safety sensors, remote controls, and control boards. If you’re stuck behind a gate that groans, drags, or won’t budge, call (903) 417-0793 and a live person answers, 24 hours a day.
Most electric gate motor repairs in Frisco run $240 – $480 before parts, depending on what failed. You’ll get a written price before any work starts. No surprises at the door. No vague promises.
Why Calder Gate Repair Is Frisco’s Preferred Electric Gate Repair Company
Frisco homeowners call us because we show up when we say we will, with a uniformed, background-checked technician you can track to your door. No four-hour windows. We dispatch from the Dallas-Fort Worth office, and our crews work Frisco neighborhoods daily, from Stonebrook Crossing to Christie Ranch and up toward the Celina line.
Nico Alvarez leads our team, and he’s built Calder’s reputation on a simple rule: name the problem, name the price, fix it right. The 365-Day Done Right Promise backs every repair. If what we fixed fails within a year, we return free. That’s written on every job, not buried in small print.
We also answer our own phone. Call at 2 a.m. with a gate stuck open and you’ll talk to a real person who can dispatch a technician, not a recording. For Frisco homeowners with young kids or a dog in the yard, that matters.
Electric Gate Motor in Frisco
Electric Gate Motor replacement in Frisco usually means the motor inside your opener has burned out or stripped its gears after years of fighting a gate that’s out of level. The motor is the muscle. When it fails, the gate either won’t move at all or stalls partway. A new gate motor costs $240 – $480 installed in Frisco, before you factor in any track realignment or footing work the clay soil may have made necessary.
Motor burnout from dragging gates
We see this a lot in Frisco neighborhoods built on expansive clay. The soil swells in wet months and shrinks during dry spells, tilting gate posts slightly. That tilt makes the gate drag, which forces the motor to work harder every cycle. Eventually the overload circuit trips, or the motor simply dies. We replace the motor and fix the geometry, so the new one isn’t doomed to the same fate.
Sizing and replacement
Not every motor fits every gate. A heavy wrought-iron swing gate on Stonebrook Parkway needs a different motor than a lightweight aluminum slide gate in Christie Ranch. We match the motor to your gate’s weight, length, and duty cycle, then set the travel limits and safety reversal so it passes the UL 325 entrapment test before we leave.
Gate Access Control in Frisco
Gate Access Control covers everything that decides who gets in: keypads, remote controls, intercoms, loop detectors, and the control board that ties them together. In Frisco, the two biggest call drivers are lightning strikes along the SH 121 corridor frying control boards, and keypad codes that stop working after a power surge. Full access control repair runs $180 – $400 for the electronics, with keypad replacement typically $150 – $280.
Storm-surge board failures
When a thunderstorm rolls through Frisco and your keypad goes dead along with the remote, it’s rarely the keypad’s fault. The surge usually hits the control board first, especially on LiftMaster and DoorKing units where the loop detector and safety photocell share an ungrounded circuit. We replace the board, harden the circuit, and reprogram your remotes and keypad on the spot.
Keypads that eat batteries
A keypad that works in the driveway but dies when you type from the curb is often a wiring or antenna problem, not a keypad problem. We trace the low-voltage line, check the antenna, and replace the keypad if needed. Most Frisco repair visits finish in one trip.
Trusted Brands We Service in Frisco
We stock parts locally for the brands Frisco homeowners actually own. That includes Viking, DoorKing, and Elite, plus LiftMaster, FAAC, BFT, Linear, Ghost Controls, and Mighty Mule. Our technicians train on all nine, which means we don’t have to order your board from some warehouse and make you wait a week. Faster diagnosis, faster repair, and less downtime for a gate that’s supposed to keep your yard secure. If you’re not sure what brand you own, call (903) 417-0793 and we’ll help you identify it over the phone.
Common Electric Gate Repair Problems We See in Frisco Homes
- Clay heave tilting gate posts: Frisco’s Blackland Prairie clay expands and contracts with the wet-dry cycle, moving post footings enough to bind swing gates. A gate that drags in August may swing free in January. The fix is resetting the footing deeper and wider, not just adjusting a hinge.
- Solar systems that brown out in summer heat: We see solar gate openers with panels too small for North Texas heat loads. The battery drains by mid-afternoon and the gate stalls mid-travel. We size panels and batteries for Frisco’s July temperatures, not a national average.
- Lightning-damaged control boards: Storms along SH 121 send surges through ungrounded circuits, killing boards on LiftMaster and DoorKing units. Replacing the board without fixing the grounding means buying a second board after the next storm.
- Safety sensor misalignment: Photocells knocked out of alignment by a bumped post or a weed line cause gates to reverse for no apparent reason. It’s a fast fix, but until it’s done, the gate is an entrapment risk for kids and pets.
Pricing for Electric Gate Repair in Frisco, TX
Here’s what Frisco homeowners can expect to pay:
- Gate motor replacement: $240 – $480 installed
- Keypad replacement or repair: $150 – $280
- Control board replacement: $180 – $400
- Safety sensor replacement or realignment: $90 – $180
- Remote control programming or replacement: $60 – $150
- Post footing reset and re-level: $350 – $750, depending on depth and concrete volume
Parts are quoted separately and in writing. The invoice you sign is the price you pay. Our Electric Gate Repair team provides free estimates on all work, and every repair carries the 365-Day Done Right Promise with a free return visit if it fails.
We Also Serve Cities Near Frisco
Our Electric Gate Repair in Frisco coverage extends to Prosper, Aubrey, Little Elm, and Celina. If you live just outside city limits, you’re still in our service area. Same pricing, same written estimate, same live phone answer, and the same 365-Day Done Right Promise on every job.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Frisco
If your gate drags in late summer but swings freely in January, your operator is probably fine. The real problem is Frisco’s Blackland Prairie clay shrinking during dry spells, which makes the gate post tilt and the gate drop. We reset the post footing deeper and wider rather than just cranking up the operator force. Forcing the motor through a dragging gate is how you burn one out. Call (903) 417-0793 and we’ll diagnose it before you replace a motor that doesn’t need replacing.
Run the UL 325 entrapment test: place a firm object like a trash can in the gate’s path and close the gate. The gate should reverse within two seconds of contact and stop closing. If it doesn’t reverse, the safety edge or the motor’s internal obstruction detection has failed, and the gate is unsafe. This is the entrapment danger the national standard exists to prevent. We test this on every repair call, and we’ll show you how to do it yourself in about two minutes.
No. When a storm kills your keypad and remote at the same time, the control board is almost always the casualty. The keypad itself is usually fine. Surges along the SH 121 corridor hit high and hit fast, especially on circuits that share a ground between the loop detector and the photocell. We replace the board, fix the grounding, and reprogram everything. The operator is rarely what failed.
Yes, solar works in Frisco, but only if the panel and battery are sized for North Texas. We see a lot of solar systems installed with panels that can’t keep a battery charged through a Texas July. By mid-afternoon the gate stalls. We size the panel for your gate’s duty cycle and our actual sun load, not a national average clip art. Running line voltage is always the most reliable option, but a properly sized solar system works fine for most single-family gates.
No. A proper gate installation takes three to seven days from measure to final test. It includes pouring a footing deep enough to hold against Blackland Prairie clay movement, running line voltage to the gate (or sizing solar properly), mounting the operator, installing safety edges and photocells, and setting travel limits. The final day includes the UL 325 entrapment test and your walkthrough. We provide a free measure and a written price before any work starts, but we don’t rush a footing pour. Call (903) 417-0793 to schedule your free site measure.
Call Calder Gate Repair for Electric Gate Repair in Frisco
Whether your gate is stuck open, stuck closed, or dragging and groaning every cycle, we’ll send a uniformed, background-checked technician with a trackable arrival time, a written price, and the training to fix it right the first time. We’re the Electric Gate Repair specialists inside the Relay Home Co. family, and we answer our phone live, 24/7. Call (903) 417-0793 for a free estimate on Electric Gate Repair in Frisco, and get a written price before anything gets touched.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Frisco, TX.