Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Frisco, TX
Gate repair in Frisco, TX runs into a few challenges you won’t find 30 miles south in Dallas: heavier clay soil that shifts concrete gate posts, open-lot subdivisions with long driveway runs, and summer heat that cooks circuit boards inside gate opener cabinets. Most repair calls we take from Frisco homeowners involve a gate that’s sagging on its hinges, a keypad that stopped responding, or an opener motor that works intermittently. We fix all of it, and the price is on paper before we touch a bolt. Call (903) 417-0793 any time – a live person answers.
Why Frisco Homes Are Different
Frisco’s housing stock is mostly built after 1995, which means most gates were installed when the house was. The original openers on those gates are aging out together: LiftMaster and Elite units from the early 2000s are common in neighborhoods like Stonebriar and The Trails, and those circuit boards are at the end of their service life. Gates are also heavier here than people expect: ornamental steel and iron are the default look across Frisco, and when a 400-pound gate sags, the opener motor burns itself out trying to hold position.
Clay soil is the quiet problem. Frisco sits on expansive clay that swells after rain and shrinks in August. Gate posts set in concrete move – sometimes half an inch, sometimes more – and that movement is what causes the gate to drag on the ground or fail to close against the latch. We shim hinges, adjust post plates, and set travel limits so the opener isn’t fighting the ground every cycle. In neighborhoods with HOA requirements, like Phillips Creek Ranch or anywhere in the newer master-planned sections along FM 423, we also make sure repairs match the original finish and hardware so there’s no notice taped to your door.
Cold snaps matter less than you’d think. The bigger Frisco-specific wear item is UV exposure: gate opener control boxes, safety photo eye lenses, and vinyl keypad membranes all degrade faster under direct Texas sun. We stock replacement seals and covers, and we set the opener box out of the afternoon glare whenever the mount allows it.
Our Main Frisco Services
The three services below are the calls we run most often in Frisco. Each has its own detailed page with pricing, what the repair involves, and how same-day scheduling works.
Gate Repair in Frisco
A sagging gate, a broken hinge weld, a wheel that’s chewed through the track: this is the physical, mechanical side of gate work. In Frisco, the biggest culprit is post shift from clay soil movement – usually the gate still looks fine but drags on the ground or rattles against the latch. We reinforce hinge mounts, adjust rollers and track alignment, and weld or replace cracked pickets on-site where possible. If your gate binds partway through its travel and the opener sounds like it’s straining, that’s a mechanical problem that will kill the motor if it’s left alone. Read the full breakdown and local pricing on our Gate Repair in Frisco page.
Electric Gate Repair in Frisco
Electric gate problems tend to show up as dead keypads, photo eyes that won’t stay aligned, or a gate that opens fine but won’t close. In Frisco, the extra wrinkle is exposure: photo eyes and wire splices near the pavement get baked in summer and soaked in spring storms. We trace low-voltage wiring, replace corroded connections, test safety edges and loops, and get the open/close cycle working reliably again. If your gate opens but reverses before it closes, that’s often a safety sensor issue – not the motor. Details are on the Electric Gate Repair in Frisco page.
Gate Opener Repair in Frisco
Gate opener repair is motor and logic-board work: the gate won’t respond at all, the remote works but the keypad doesn’t, or the opener sounds like it’s straining and the gate only moves a few inches. Frisco’s housing stock means we see plenty of LiftMaster, DoorKing, and Elite openers from the original build, and a high percentage of those have heat-stressed boards. We carry the common replacement components and swap in factory or equivalent parts, then set the force and travel limits so the opener isn’t overworking. The full job scope and price ranges are on the Gate Opener Repair in Frisco page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Frisco
We work on every major gate opener brand found in Frisco, and we carry common parts for Viking, Ghost Controls, DoorKing, and Elite units on the truck so most jobs don’t need a second trip. If we need something unusual, we source it through our supply network the same day. See the full list on our brands page.
Pricing for Gate Company in Frisco, TX
| Service | Typical range in Frisco |
|---|---|
| Gate opener circuit board replacement | $240 – $385 |
| Gate motor replacement | $425 – $675 |
| Photo eye sensor replacement | $120 – $190 |
| Keypad replacement | $140 – $220 |
| Limit switch replacement | $130 – $200 |
| Hinge weld repair | $180 – $320 |
| Gate wheel or roller replacement | $110 – $175 |
| Diagnostic service call | $75 – $95, waived with repair |
What moves the price in Frisco is weight and finish. A heavy ornamental iron gate needs more labor to lift and re-align than a tubular aluminum one, and matching a powder-coat finish on a repaired section adds materials cost. Every job gets a written price before work starts – the number quoted at the door is the number on the invoice.
Neighborhoods We Serve in Frisco
We cover all of Frisco, from the original sections near Main Street east to the newer developments off the Dallas North Tollway and FM 423. Typical response time in Frisco is 60 to 90 minutes for emergency repair calls.
- Stonebriar
- The Trails
- Phillips Creek Ranch
- Griffin Parc
- Newman Village
Service Area – Cities Near Frisco
In addition to our Frisco coverage, we run gate and opener repairs in the towns just north and west of the city. If you’re in Prosper, TX, Aubrey, TX, Little Elm, TX, or Celina, TX, the same rates, guarantees, and same-day scheduling apply.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Frisco
For emergency gate repairs – a gate stuck open, an opener that won’t respond, or a safety issue – we typically arrive in Frisco within 60 to 90 minutes. Scheduling for non-urgent maintenance is usually within one to two business days. Call (903) 417-0793 and we’ll give you a live arrival window you can track.
For repair work that matches the existing gate and hardware, HOAs in Frisco generally don’t require advance approval. If a replacement changes the gate’s appearance, finish, or height, your HOA may need to review it first. We can note the original finish and hardware style on your quote so your board has what it needs.
Yes, always. Every repair starts with an on-site diagnosis and a written price that covers labor and parts. If the repair fails within 365 days under our 365-Day Done Right Promise, we return and fix it at no charge. You’ll never get an invoice higher than the number you approved.
Need a gate repaired in Frisco? Call (903) 417-0793 for a free estimate – a live person answers 24/7, and the price is on paper before anything starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Frisco Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.