Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Prosper, TX
Gate repair in Prosper, TX usually runs between $180 and $650 depending on whether it’s a misaligned sensor, a failed circuit board, or a bent steel gate post. Most jobs are completed same day once a technician arrives, and every visit starts with a written price before a single bolt is turned. Calder Gate Repair is Prosper’s dedicated gate specialist, part of the Relay Home Co. family, with technicians who know the homes, HOAs, and gate styles across this part of Collin and Denton counties. Call (903) 417-0793 and a live person answers, day or night.
Why Prosper Homes Are Different
Prosper’s gate work has its own character because the housing stock is newer, the lots are bigger, and the expectations are higher than in older Dallas suburbs. We regularly see wrought-iron driveway gates on acreage properties east of Preston Road, modern horizontal-picket gates in gated communities like Whitley Place and Star Trail, and a growing number of custom steel pedestrian gates on homes built since 2015. The clay-heavy North Texas soil shifts with every wet-dry cycle, which means gate posts settle, hinges bind, and opener brackets pull out of alignment faster than homeowners expect.
Prosper sits on the far northern edge of the Metroplex where wind and full sun hit gates with no tree cover to soften the exposure. That combination ages opener circuit boards, cracks limit switch housings, and shortens capacitor life. HOAs here, including several along Prosper Trail and around Prestonwood, often require gates to remain operational within a short window, so a dead opener isn’t just an inconvenience – it can trigger a violation notice. Our technicians factor all of that into every Prosper repair call.
Our Main Prosper Services
Most Prosper calls come down to two things: the gate itself stopped moving correctly, or the opener that drives it quit. Each service has its own detailed Prosper page below, with local pricing and what to expect.
Gate Repair in Prosper
Steel and wrought-iron gates in Prosper deal with heavy use and heavy weather. We repair sagging gates, bent rails, broken hinges, cracked welds, and posts that have shifted in the expansive clay soil common around the Light Farms and Gentle Creek areas. A gate that drags on the driveway or won’t latch puts strain on the opener and eventually burns it out, so we address the mechanical issue first, then the opener. Every gate repair in Prosper gets the same treatment: written price, uniformed technician, and the 365-Day Done Right Promise. Learn more on our Gate Repair in Prosper page.
Electric Gate Repair in Prosper
Electric gates fail in specific, predictable ways in Prosper – power surges after thunderstorms, wiring chewed by rodents near drainage culverts, and safety sensors knocked loose by kids or landscaping crews. We trace the full circuit from the panel to the operator, repair or replace contactors, transformers, and photo eyes, and re-secure all conduit runs so the job holds through the next North Texas storm season. You’ll get a written diagnosis and a fixed price before we order a single part. Details are on our Electric Gate Repair in Prosper page.
Gate Opener Repair in Prosper
Opener failures in Prosper skew toward two issues: circuit boards fried by lightning or power surges, and gear assemblies stripped by gates that were already binding before the opener gave out. We service operator arms, keypads, remote receivers, and the full control board across multiple brands, and we stock common boards and sensors on our trucks so most opener jobs are one trip. If the opener is beyond repair, we quote a replacement in writing before any work begins. See specifics on our Gate Opener Repair in Prosper page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Prosper
Prosper homeowners run a mix of operator brands depending on what the original builder or gate contractor installed. We’re factory-familiar with FAAC, BFT, Linear, and Viking among others, and carry common parts for each on our trucks. That means fewer second trips and faster turnaround when a board or sensor fails. See our brands for the full list of what we service.
Pricing for Gate Company in Prosper, TX
| Service | Typical range in Prosper |
|---|---|
| Gate opener repair | $180 – $520 |
| Electric gate repair | $210 – $600 |
| Gate repair (mechanical) | $165 – $550 |
| Hinge replacement | $120 – $275 |
| Gate opener installation | $450 – $1,100 |
| Gate operator arm replacement | $190 – $430 |
| Keypad installation | $105 – $240 |
| Photo eye or safety sensor replacement | $95 – $225 |
| Limit switch replacement | $80 – $185 |
| Circuit board replacement | $160 – $410 |
| Remote transmitter programming | $45 – $95 |
In Prosper, prices tend to climb when a gate post has shifted significantly in the clay soil and needs to be reset, when the opener is a specialty brand with slower parts lead times, or when HOA requirements force a specific opener model. Whatever the number is, you’ll see it in writing and agree to it before any work begins. The invoice matches the quote, always.
Neighborhoods We Serve in Prosper
Our technicians cover all of Prosper, from the newer builds near Frontier Park to the larger lots east of Custer Road. Typical response time in Prosper is 60 to 90 minutes for emergency calls, with scheduled appointments available same day in most cases.
- Whitley Place
- Star Trail
- Light Farms
- Gentle Creek
- Prestonwood
Service Area – Cities Near Prosper
Calder Gate Repair is based in the Dallas-Fort Worth area, and our Prosper crew also covers the surrounding communities when homeowners need a gate specialist who can be there quickly. We serve Frisco, TX, Celina, TX, Little Elm, TX, and McKinney, TX with the same written-price promise and 365-Day Done Right guarantee.
Serving Prosper, TX - Our Local Coverage Area
We’re based in the Prosper area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Prosper
For emergency gate repairs in Prosper, our typical arrival window is 60 to 90 minutes from your call. A live person confirms your address, dispatches the nearest uniformed technician, and sends you a trackable arrival time so you’re not watching the driveway through a four-hour window.
Most Prosper HOAs require gates to match the original community design, especially in neighborhoods like Star Trail or Whitley Place. Repairs rarely need pre-approval, but full replacements sometimes do. We’ll tell you what’s repairable versus replaceable, and we can provide the documentation your HOA asks for.
Yes. Most of our Prosper work is on gates and openers installed by other builders or contractors. We service all major brands, trace the existing wiring and sensor layout, and put the repair price in writing before anything is touched. The 365-Day Done Right Promise applies no matter who did the original install.
If your gate is stuck, sagging, or the opener won’t respond, call Calder Gate Repair at (903) 417-0793. A real person answers 24/7, the estimate is free, and the written price includes everything, with no surprises at the invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Prosper Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.