Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Crowley
When your electric gate stops working in Crowley, TX, you need a repair crew that understands what’s actually going wrong, not one that shows up and guesses. Most electric gate repairs in Crowley run $180 – $340 before parts, and the fastest way to get a straight answer is to call (903) 417-0793. Calder Gate Repair serves every corner of Crowley, from the newer subdivisions along FM 1187 to the older acreage lots out near the Chisholm Trail corridor. Our technicians are background-checked, uniformed, and dispatched with a live, trackable arrival time, which means no four-hour waiting windows. Nico Alvarez, who leads our gate repair team, built this operation around one simple idea: tell the homeowner the truth about the gate, put the price in writing, and stand behind the fix for a full year.
We also stock the common boards, limit switches, remotes, and safety sensors that keep most Crowley gates running, so the fix usually happens on the first visit instead of a week later. If the gate is dead in the driveway and you’re not sure whether it’s the motor, the post, or something else entirely, call us. We’ll walk you through a few quick checks over the phone and give you a straight answer before anyone rolls a truck.
Why Calder Gate Repair Is Crowley’s Preferred Electric Gate Repair Company
Crowley homeowners keep our number for the same reason they keep a good mechanic’s: we tell them what’s actually wrong, what it costs to fix, and whether it’s worth fixing at all. Calder Gate Repair is part of the Relay Home Co. family, established in 2009, and every Crowley job is covered by three non-negotiable guarantees: a written price before any work starts, a written guarantee on every repair, and a free second visit if that repair fails within the 365-Day Done Right Promise window. That last part is not marketing language. If we fix a gate opener in Crowley and it fails again eight months later, we come back at no charge.
Local knowledge matters in this trade more than most people realize. A gate that stopped working in a Crowley subdivision off FM 1187 might have a fried control board from a storm surge, while the same symptom on an older lot near the Crowley ISD side might be a hinge post that settled in the blackland clay. Our Electric Gate Repair team sees both patterns every month. We were founded to handle exactly this kind of work, and every one of our techs is trained on nine leading gate opener brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When you call, a live person answers, 24 hours a day, not a voicemail tree.
Automatic Gate Repair in Crowley
Automatic gate repair in Crowley often begins with a question the homeowner hasn’t considered: is the gate actually broken, or is the post moving? We see that confusion constantly on properties throughout Crowley, where the expansive blackland clay shifts with every wet-dry weather cycle. A swing gate that sags a half inch at the latch may look like an operator fault, but the real culprit is usually the hinge post footing pulling out of the ground. That’s why we quote post footing depth and soil conditions before we ever look at the operator itself. Get that wrong and you’ll be replacing the same motor in two years.
For the operator portion of automatic gate repair, most Crowley jobs run $180 – $340 before parts, with parts typically adding another $80 – $250 depending on the brand and what failed. A Limit Switch, the small sensor that tells the gate when to stop, is a $45 – $90 part on most FAAC and Linear models. So is the repair usually less than $500 all-in? Often, yes. But if the board is fried, the number moves higher.
Limit Switch Replacement
A bad limit switch makes a gate act confused: it stops halfway, slams into the post, or reverses for no logical reason. On a Linear or Viking operator, this is one of the most common failures we see in Crowley, and the fix typically takes under an hour once we’re on site.
Board and Capacitor Issues
North Texas storm fronts are hard on gate electronics. Power surges over the Crowley grid kill operator boards every season, especially on gates with older panels. We diagnose the board before replacing anything, because a dead capacitor and a dead board look similar but cost a few hundred dollars apart. We’ll show you the failed part and put the replacement cost in writing before we touch anything.
Electric Gate Motor in Crowley
An electric gate motor in Crowley is under constant stress from two things: heat and soil movement. The summers push capacitor temperatures high, and the clay swells and contracts enough to bind a swing hinge or shift a slide rail a fraction of an inch. When a homeowner tells us the gate motor is “making noise but not moving,” the problem is frequently mechanical load, not the motor internals. We always test that first because motors get blamed for symptoms they didn’t cause.
Replacing a gate motor in Crowley generally runs $320 – $650 for the labor and a compatible motor, with higher-end LiftMaster and FAAC units at the upper end after installation. If the existing motor can be rebuilt or the capacitor swapped, that number drops significantly. We’ll give you the honest trade-off: a motor with heavy-wear scoring on the internal gears may run another six months, but if it’s already fighting a binding post, you’re throwing money at the symptom.
Swing vs. Slide Gate Motors
Swing gates in Crowley tend to fail at the hinge and the actuator arm, especially on older rural lots where the posts were set decades ago. Slide gates fail more often at the track level, where debris and loose soil from the clay expansion weeks disrupt the wheel guides. We service both, and we stock common motor parts for both styles on the truck.
Power Supply and Wiring Checks
A motor that hums but won’t turn often has a voltage problem at the feed, not a mechanical failure. In Crowley, where many homes have underground service runs from older panels, we check the breaker, the wire gauge, and the connection points before condemning any motor. Sometimes the fix is a $60 wiring repair, and the motor is fine.
Trusted Brands We Service in Crowley
We repair and maintain the gate opener brands Crowley homeowners actually have installed, which means we’re factory-familiar with a lot more than the two or three names everyone recognizes. LiftMaster and DoorKing are common in the newer subdivisions off FM 1187, while the older acreage properties often run FAAC, BFT, Linear, or Viking operators that the subdivision gates and small commercial lots were built around. Because we service all these brands from one Crowley-area crew, we don’t have to tell you “we don’t work on that” and then leave you looking for a specialist. We keep the common boards, remotes, and sensor kits in local stock, which cuts repair time down to a single visit for most jobs. Ghost Controls and Mighty Mule openers, popular on the lighter residential swing gates, are also in our wheelhouse, and both have known weak points we can usually identify from your description over the phone.
Common Electric Gate Repair Problems We See in Crowley Homes
- Hinge post settlement in blackland clay. The clay under much of Crowley expands when wet and contracts when dry, eventually shifting a swing gate’s hinge post enough to bind the gate. The motor gets blamed, but the real fix is pulling the old footing, setting a deeper one, and re-hanging the gate leaf.
- Operator boards fried after storm power surges. Crowley sits in the middle of North Texas thunderstorm territory, and a lightning-adjacent surge can take out a control board in a single strike. The gate stops mid-travel with a dead remote and no keypad override, which is why we recommend a surge suppressor on any new board we install.
- Safety sensors knocked out of alignment. Wind-blown debris and string trimmer contact are the two most common reasons a Crowley gate suddenly reverses or refuses to close. The UL 325 entrapment protection sensors get nudged a few degrees, and the gate acts possessed. Realigning and cleaning them is a quick fix, but it has to be checked against the operator’s response settings.
- Remote and keypad failures that mimic a dead operator. When a remote stops working and the keypad does nothing, Crowley homeowners often assume the gate motor is dead. We check the receiver board, remote programming, and keypad power before we quote any motor work. Sometimes it’s a $95 replacement remote, not a $600 motor.
Pricing for Electric Gate Repair in Crowley, TX
Let’s put real numbers on the table. A standard electric gate repair in Crowley, the kind where we’re replacing a limit switch, a safety sensor, or a remote receiver board, typically runs $180 – $340 before parts. Parts add anywhere from $40 for a basic sensor to $300+ for a main control board on a LiftMaster or FAAC unit. A full gate motor replacement usually lands between $320 – $650 installed. If the job needs a new post footing due to clay movement, add roughly $150 – $400 depending on depth and access. Every quote is written, every price is agreed to before work starts, and the invoice at the end matches the number on the estimate. We never do the “quoted one number, billed another” routine. Call (903) 417-0793 and we’ll give you a real range based on what’s actually happening with your gate, over the phone, from a live human being.
We Also Serve Cities Near Crowley
Calder Gate Repair serves Crowley, TX as well as the surrounding communities of Burleson, Joshua, Kennedale, and Arlington. If you’re just outside the city line and wondering whether we’ll make the drive, the answer is yes. Our scheduling is run through the Dallas-Fort Worth office, and we dispatch Crowley-area calls every weekday, including most Saturdays.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Crowley
We diagnose that by checking the post and footing before the motor, because in Crowley the expansive blackland clay shifts posts more often than motors fail. If the gate is binding at the hinge, the motor strains against a load it wasn’t built for and burns out early. We clear the mechanical issue first, then test the operator. Call (903) 417-0793 and we’ll walk you through the quick checks to narrow it down before we even arrive.
Yes. Our techs are trained on LiftMaster, FAAC, and seven other major brands, including BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common replacement boards and remotes for both LiftMaster and FAAC locally, so most repairs on those brands are single-visit jobs.
A complete automatic gate installation in Crowley, including the gate leaves or panels, posts, operator, power run, and safety sensor setup, typically takes two to four days depending on soil work and whether we’re adding a keypad or loop detector. We never promise same-day installation because a proper install involves groundworks, concrete curing, and UL 325 safety testing. We do promise a written price and a hard schedule before the job starts.
A proper automatic gate installation includes the gate structure itself, the operator and its mounting hardware, the electrical run from your panel, safety edges and UL 325 entrapment protection sensors, and full reversal testing. Anything less, and the gate is not code-compliant. We include all of that in every install quote we give in Crowley, plus a written guarantee on our workmanship.
Yes, and it’s one of the more common upgrades we do. Adding a keypad entry typically runs $150 – $350 installed, depending on the opener brand and whether we’re running new low-voltage wire. A loop detector, which opens the gate automatically for vehicles approaching from your side, runs higher because it involves cutting and sealing the driveway surface. We quote both jobs in writing before any work starts. Call (903) 417-0793 for a free estimate.
Call Calder Gate Repair for Electric Gate Repair in Crowley
If your gate is stuck half-open on FM 1187, dead at the keypad near the Crowley ISD side, or sagging on an older lot off the Chisholm Trail corridor, call (903) 417-0793 now. A live person answers, 24 hours a day, 7 days a week. We’ll give you a straight diagnosis over the phone, a real price range, and a trackable arrival time. Every repair comes with the 365-Day Done Right Promise: if the fix fails within a year, we return at no charge. Written price before any work starts, written guarantee on every job, and no surprises on the invoice. That’s the whole deal.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Crowley, TX and the surrounding communities.