Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Parkway
An electric gate that won’t open in Parkway is more than a headache – it’s a car stuck in the driveway at 7 a.m. and a security gap on your property line. Calder Gate Repair fixes gate motors, keypads, safety sensors, and control boards across Parkway, usually with same-day service when the problem is a failed opener or a tripped sensor. We know Parkway’s neighborhoods, its older ranch tracts and newer infill lots, and we know that most gate failures here trace back to the ground, not the gearbox. Call (903) 417-0793 and you’ll get a live person who can book a trackable arrival window, not a voicemail.
Why Calder Gate Repair Is Parkway’s Preferred Electric Gate Repair Company
Parkway homeowners call us because we do the unglamorous work that actually fixes the gate. That means checking the hinge post before we blame the operator, running a new power stub when the driveway never had one, and testing entrapment protection after every repair. We don’t swap parts and hope. We diagnose the full system – motor, board, photo-eyes, safety edges, post alignment – and give you a written price before any tool comes off the truck.
Our techs arrive in uniform, background-checked, with a live arrival time you can track from your phone. No four-hour windows, no phone tag. And every job carries the 365-Day Done Right Promise: if the repair fails within a year, Calder returns at no charge. That’s in writing, on every invoice, for every Parkway job.
Calder Gate Repair is part of the Relay Home Co. family, established 2009, and led by Nico Alvarez, who built the gate division around one idea – tell the customer exactly what’s wrong, what it costs, and when it’ll be fixed. No mystery diagnostics, no soft estimates. Just straight answers and a gate that works by the time we leave.
For broader context on what full-system Electric Gate Repair involves, our service hub page covers the nine opener brands we work on and what a complete diagnostic includes. Here in Parkway, though, the call is usually about soil movement, missing power, or a sensor that’s been knocked out of alignment by a shifting post.
Gate Access Control in Parkway
Gate Access Control in Parkway means giving you control over who gets in and when – and it’s one of the most common upgrades we handle on properties where the gate itself still works fine but the entry method doesn’t. Keypads, remotes, smartphone apps, vehicle detection loops, intercom tie-ins: that’s access control. In Parkway, we regularly convert old key-switch gates to keypad and app entry so homeowners aren’t handing out physical keys or remotes that cost $60 each to replace.
Keypad and Remote Entry Upgrades
Adding a keypad or app-based entry to an existing Parkway gate usually runs $350 – $800 installed, depending on the opener brand and whether we’re wiring to a Viking, Ghost Controls, or DoorKing board. If the gate has no power stub at the line, expect a trenching and conduit run before the keypad goes on the post – a half-day job on its own.
Vehicle Detection and Intercom Integration
Loop detectors that open the gate as your car approaches, paired with an intercom or video doorbell at the drive – that’s a $900 – $1,800 project on most Parkway lots. It’s the upgrade we recommend for anyone tired of remote batteries dying or visitors leaning on the horn at the gate. You’ll get a written price before the trench is cut or the first wire is pulled.
Commercial Gate Operator in Parkway
Commercial Gate Operator work in Parkway is for properties that need more cycles per day than a residential opener is built for: HOAs, self-storage, offices off the main drags, and small industrial lots. These units – Viking, Elite, DoorKing – are rated for continuous duty, and the installation is heavier: bigger motors, reinforced post brackets, dedicated power, safety edges, and often a bollard or crash protection. A full commercial operator install in Parkway typically runs $2,800 – $6,500 depending on the gate width, the controls package, and whether we’re running new conduit.
HOA and Multi-Tenant Gate Systems
For Parkway HOAs and apartment gates, we install commercial operators with access control panels, exit loops, and fail-safe releases that meet fire access requirements. These projects are measured, ordered, and scheduled – we don’t promise same-day on commercial work. What we do promise is a site survey, a written quote, and an install date we actually hit.
Operator Replacement and Retrofit
Replacing a worn-out commercial operator on an existing Parkway gate post usually runs $1,800 – $4,200, including the new unit and the safety-edge testing that UL 325 requires. If the existing post has moved from expansive clay, the job starts with the footing, not the motor – and we’ll tell you that before you spend the money.
Trusted Brands We Service in Parkway
Our Parkway techs are factory-trained on the brands most homes and commercial properties actually have: Viking, Ghost Controls, and DoorKing show up most often in residential work, while Elite and LiftMaster dominate the commercial side. We also service FAAC, BFT, Linear, and Mighty Mule. Because we stock common control boards, photo-eyes, and limit switches for these brands, many Parkway repairs are done in one trip instead of waiting on a shipped part. If the board in your Viking opener died at 3 p.m., we can often have the replacement in by the next morning and you’re back in business before lunch.
Common Electric Gate Repair Problems We See in Parkway Homes
- Hinge-post heave from expansive clay. Parkway sits on soils that swell and shrink with the seasons, and swing gate posts tilt. The gate panel drops, drags on the driveway, and the safety photocell beam gets pinched or misaligned – so the gate blames the sensor when the real problem is the footing. We fix the post first, then the panel, then the beam.
- No power stub at the gate line. Many original Parkway driveways were poured before anyone thought about an electric gate, so there’s no 120V at the gate. That means trenching and conduit before any operator goes in. It’s a schedule factor, not a same-day swap – and we tell you that up front so you’re not surprised on install day.
- Photo-eye and safety-edge faults on shifted posts. When a post moves even a half inch, the entrapment protection trips or won’t clear. It’s not a bad sensor nine times out of ten – it’s a beam that’s now pointing at grass instead of the reflector. We re-align and re-test rather than selling you a part you don’t need.
- Control board failures from power surges. Parkway’s older electrical infrastructure and summer brownout conditions are rough on gate controller boards. A power blip can scramble the programming on a Ghost Controls or DoorKing board. The fix is usually a board-level repair or replacement with a surge protector added to the line.
Pricing for Electric Gate Repair in Parkway, CA
Here’s what Parkway homeowners can expect to pay, in plain numbers. A basic diagnostic visit runs $89, and that’s credited toward the repair if you proceed. Gate motor replacement on a residential swing gate typically lands between $650 and $1,400, depending on the brand and whether the operator is a Viking, Ghost Controls, or DoorKing. Control board replacement runs $280 – $600. Photo-eye realignment or replacement is $150 – $350. Full keypad and access control conversion runs $350 – $800. Commercial operator installs start around $2,800. Every price is quoted in writing before we start, and the invoice matches the quote – that’s the Relay Standard, not an upsell. Call (903) 417-0793 for a free estimate on your specific gate.
We Also Serve Cities Near Parkway
Calder Gate Repair covers Parkway and the surrounding metro. Our crews regularly handle electric gate jobs in Los Angeles, San Diego, San Jose, and San Francisco, with the same upfront pricing and 365-Day Done Right Promise on every job. If your property sits on the edge of Parkway and one of these cities, we’ll route the nearest tech to you.
Serving Parkway, CA - Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Parkway
Nine times out of ten it’s the sensors – specifically, the photo-eyes have been knocked out of alignment because the hinge post has shifted in Parkway’s expansive clay. The gate thinks the beam is blocked and refuses to close, or it closes and won’t reverse because the beam isn’t seeing anything at all. We check the post first, re-set the footing if needed, re-align the photo-eyes, and run a UL 325 entrapment test. Call (903) 417-0793 if your gate is acting like this – it’s a half-day fix at most when we catch the post early.
If your original driveway was poured without a power stub at the gate line, yes – you’ll need 120V trenched and run in conduit before any operator can go in. Most Parkway ranch tracts built before roughly the 1980s have no gate power, and newer infill lots sometimes skip it too. We handle the trench, conduit, and the connection to a dedicated breaker, and the price is in the written quote before the trenching starts. No surprises on the invoice.
Yes, and it’s one of the most common upgrades we do in Parkway. We can add a keypad, app control, or a vehicle detection loop to most LiftMaster, Viking, Ghost Controls, and DoorKing openers without replacing the whole operator. Expect $350 – $800 for a keypad and app upgrade, more if we’re adding intercom or vehicle loops. You’ll get the price in writing before the work starts, and the install usually takes half a day once we’re on site.
Because the panel was never the problem – the hinge post is. Parkway’s expansive clay soils swell in winter and shrink in summer, and the post tilts a little more each season. Fixing the panel without re-setting the post means fixing it twice. We re-set the post in a deeper footing, correct the hinge-side sag, and then align the panel so it swings true. The 365-Day Done Right Promise covers that fix – if it fails, Calder returns at no charge.
Yes. We install and service commercial operators – Viking, Elite, DoorKing – for Parkway HOAs, storage facilities, offices, and industrial lots. A full commercial install runs $2,800 – $6,500 depending on gate width and controls, and the work is measured, quoted, and scheduled – not same-day. Call (903) 417-0793 for a site survey and written quote, and we’ll walk the property before we give you a number.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Parkway with electric gate repair, access control, and commercial operator work.