Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Sunrise
An electric gate that won’t open in Sunrise isn’t just a hassle. It blocks your car in, leaves your property open overnight, and sometimes refuses to close at all. Most gate failures in Sunrise homes trace back to a short list of causes: a failed motor, a corroded underground power splice, a misaligned safety sensor, or a control board damaged by one of our afternoon lightning storms. Our Gate Repair in Sunrise team fixes all of it. We arrive with a live, trackable arrival time, give you a written price before any work starts, and back every repair with our 365-Day Done Right Promise. Call (903) 417-0793 and a real person answers, 24/7.
Key Takeaways
- Most electric gate repairs in Sunrise run $149 – $650 before parts, depending on what failed. Motors and control boards sit at the higher end; keypads, remotes, and photocell realignment cost less.
- Sunrise’s high water table means many “dead” gates are actually fine motors attached to corroded underground wire. We check the power run before we sell you a motor.
- Every Calder Gate Repair job includes a written price upfront, a written 365-Day Done Right Promise, and a free second visit if the repair fails anytime within that year.
- We service Viking, Ghost Controls, DoorKing, Elite, and every other major brand you’re likely to own.
Why Calder Gate Repair Is Sunrise’s Preferred Electric Gate Repair Company
Sunrise homeowners call us because we show up when we say we will, and we tell them what the job costs before we touch a bolt. No vague four-hour windows. No invoice surprise at the end. You get a live arrival time you can track from your phone, a technician in uniform who’s been background-checked, and a price that was agreed to in writing at the door.
We’re part of the Relay Home Co. family, established 2009, and each location is independently owned and operated under The Relay Visibility Guarantee. That guarantee means before-and-after photos of every job, a digital invoice you pay by link, and a written record of exactly what was repaired. For Sunrise, our dispatch is coordinated from the brand’s South Florida office in Miami, and crews serve Sunrise locally.
Nico Alvarez leads our gate repair operations, and every technician on his team is factory-familiar with the openers Sunrise residents actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a DoorKing panel goes blank in a Sunrise Lakes condo or a Viking arm stops swinging on a house off Nob Hill Road, we already know how that opener is wired, what commonly fails on it, and which parts we need on the truck.
We’ve walked enough Sunrise properties to know the pattern. The soil here is saturated sand. Underground splices corrode. Post footings shift. And a gate that looks like a motor problem is often a grounding problem. That local knowledge changes how we diagnose, and it’s why neighbors across Sunrise keep our number saved.
Gate Access Control in Sunrise
Gate Access Control in Sunrise is the system that decides who gets in and who doesn’t. It’s the keypad at the curb, the remote in your car, the intercom at the front of a small community, and sometimes a phone app linked to an operator box. In Sunrise, access control gear takes a beating: direct sun bakes the keypad housings, storms push water into poorly sealed boxes, and the salt-sandy air accelerates corrosion on exposed terminals.
What a typical access control repair involves
We start by identifying which part of the chain actually failed. Sometimes the keypad is dead because its low-voltage transformer shorted. Sometimes the remote stopped working because the receiver board’s antenna corroded. We test the door station, the wiring back to the operator, and the reader logic before we quote you a repair. Most access control repairs in Sunrise run $149 – $420, with parts like keypads or receivers mid-range if they need replacement.
Upgrading from an old keypad to app-based entry
A Sunrise homeowner with a 12-year-old keypad often asks whether to repair or upgrade. A basic replacement keypad with a new receiver runs around $165 – $310. Moving to a smart system that opens from your phone and logs every entry costs more, typically $450 – $900, but it ends the cycle of fading keypad buttons and water-stuck codes. We’ll quote both options in writing and you pick before any work starts.
Commercial Gate Operator in Sunrise
A Commercial Gate Operator in Sunrise is the heavy-duty motor and control assembly that swings or slides a gate at a business, warehouse, storage facility, or multi-unit community. These operators run far more cycles per day than a residential unit, often hundreds, and in Sunrise they contend with the same wet, sandy soil that causes residential post footings to shift.
What a commercial operator repair actually includes
We inspect the operator’s limit switches (the small sensors that tell the gate when to stop), the drive chain or belt, the control board, and the entrapment protection sensors. On a swing gate, we also check the hinge posts for movement. A commercial operator repair in Sunrise typically runs $350 – $1,200 before parts, depending on whether we’re replacing a blown capacitor, re-welding a shifted post bracket, or installing a new control board. The price is written and agreed to before we order parts or turn a wrench.
Retrofitting older operators to meet current safety code
UL 325 compliance is not optional. If your Sunrise commercial gate lacks working photoeyes or a reversing edge, it may not pass inspection, and it creates a real liability every time it cycles. We retrofit older DoorKing and Viking operators with current safety sensors, test the reversal pressure, and document the work. Retrofits in Sunrise typically land between $500 – $1,800 depending on operator age and the number of sensors required. No same-day promise on this kind of job: we measure, quote, order, and schedule the work properly.
Trusted Brands We Service in Sunrise
We carry parts and repair know-how for the operators Sunrise homeowners and property managers actually have. Viking slide operators sit at the back of plenty of Sunrise warehouses. Ghost Controls shows up on residential gates off Flamingo Road. DoorKing still runs at a lot of older condos and HOAs. Elite is on newer builds and slide gates. If your opener is one of these, call (903) 417-0793. Our techs stock common boards, remotes, keypads, and photocells locally, which means most repairs happen in a single visit, no waiting on a parts shipment from out of state.
Common Electric Gate Repair Problems We See in Sunrise Homes
- Dead gate with a healthy motor. Sunrise sits in a high water-table zone. Underground low-voltage power runs to the gate operator sit in saturated sand and corrode over time. The motor is fine; the splice is gone. We trace the run, find the bad splice, and repair it before we ever suggest changing the motor.
- Sagging swing gate that binds against the operator. Afternoon storms soak the ground fast in Sunrise. Hinge post footings shift in soft, saturated soil, and the gate drops a few inches at the latch end. The operator strains against the bind, and eventually the gears strip. We correct the post, not just the panel.
- Safety sensors fouled or failed. UL 325 requires working entrapment protection. If a photocell gets caked with pollen and dirt or knocked out of alignment, a properly wired gate will refuse to run, or it will reverse constantly. We clean, realign, or replace the sensor and retest reversal pressure.
- Control boards fried by lightning or power surges. South Florida storms send surges through gate panels multiple times a season. We see failed boards on LiftMaster, FAAC, DoorKing, and Ghost Controls units regularly. A board replacement is usually $250 – $600 depending on the model, and we bench-test the new board before it goes in.
We were called to a LiftMaster swing gate in the Sunrise Golf Village area where the panel had dropped and the operator strained on every cycle. Our tech found the real culprit at the hinge post – the footing had shifted in wet sand. We corrected the post before touching the operator, then reset the rack and pinion and retested the safety photocell. The gate has run clean ever since.
Pricing for Electric Gate Repair in Sunrise, FL
In Sunrise, you can plan around these real price ranges: a basic service call and diagnostic usually costs $79 – $119, credited toward the repair. Replacing a keypad or receiver runs $165 – $310. A new safety photoeye pair lands around $185 – $290. A control board replacement is $250 – $600. A full gate motor replacement in Sunrise typically runs $650 – $1,450 depending on the opener brand and horsepower. The single biggest variable is whether the motor is actually the problem – in Sunrise, a surprising share of “dead” gates turn out to be a corroded underground splice or a shifted post, which costs far less to fix than a motor swap. Every quote is written and agreed to before any work starts.
Call (903) 417-0793 for your free estimate.
We Also Serve Cities Near Sunrise
Beyond Sunrise, our Electric Gate Repair crews take calls in Jacksonville, Miami, Tampa, and Orlando. If you own a property across South Florida and need a reliable opener tech, the same written pricing, 365-Day Done Right Promise, and trackable arrival time apply wherever we’re dispatched. One number covers it: (903) 417-0793.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Sunrise
In Sunrise, the first thing we check is the power run. The high water table means underground splices corrode constantly. We test voltage at the board, the transformer, and the splice before touching the motor. Plenty of “dead” gates we see are fine motors attached to a broken splice. A diagnostic visit runs $79 – $119, credited toward any repair. Call (903) 417-0793 to book one.
For a full installation in Sunrise – new posts, footing work in saturated sand, power run, operator mounting, safety edges, photocells, and reversal testing – expect 2 to 4 days on site across two visits, sometimes longer if a commercial operator or particularly wet ground requires special footing work. We never promise same-day installation. You get a written timeline and price before we order anything.
We service all nine major brands Sunrise homeowners own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate has one of those names on it, we already know the wiring, the common failure points, and which parts to bring. Call (903) 417-0793 to confirm your opener.
Because the panel wasn’t the problem. In Sunrise, wet sandy soil shifts hinge post footings. When the post tips, the whole gate drops and binds, and fixing the panel does nothing. We correct the post before doing any operator work. Repairs like this run $250 – $650 depending on footing condition and gate weight.
Yes, and it’s not optional. UL 325 requires working entrapment protection – photoeyes, reversing edges, or both – on any automatic gate. If your Sunrise gate doesn’t have functioning sensors, it’s not code-compliant and it’s a real safety risk. We install and test sensor pairs from $185 – $290. Call (903) 417-0793 for an exact quote.
Call Calder Gate Repair in Sunrise
If your electric gate is down in Sunrise, don’t wait for it to strand you or leave your property unsecured overnight. Call (903) 417-0793 now. A live person answers, 24/7, not a voicemail, not a bot. We’ll book a trackable arrival, have a technician from the South Florida office at your gate, and put your price in writing before any work begins. Every repair carries our 365-Day Done Right Promise, and if the repair fails within the year, we return at no charge. That’s the standard for Electric Gate Repair in Sunrise.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family, established 2009.