Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Sunrise
A dead gate opener or a sagging wood gate in Sunrise usually comes down to one of three things: a hinge post footing that’s shifted in sandy soil, a safety photocell that’s been knocked out of alignment, or an operator board that’s finally given up. Most driveway gate repairs in Sunrise run $180 to $420 before parts, and our crews are in Sunrise neighborhoods every weekday. Call (903) 417-0793 and a live person answers, day or night.
We know Sunrise well: the 1970s subdivisions off Sunset Strip, the gated HOAs around Sawgrass Mills, the canal-side homes west of Flamingo Road. That local familiarity means we don’t have to guess at what’s wrong. Nico Alvarez sends background-checked, uniformed techs who arrive with a trackable arrival time, not a four-hour window.
Why Calder Gate Repair Is Sunrise’s Preferred Gate Repair Company
Calder Gate Repair is the gate division inside the Relay Home Co. family, which has been running since 2009. Sunrise homeowners call us because we write the price down before any work starts, we name the 365-Day Done Right Promise on every job, and a real human answers the phone at 2 a.m. if that’s when your gate stops closing.
Sunrise’s geography actually shapes how we schedule. The Sawgrass Expressway and Florida’s Turnpike cut the city in two. A crew crossing from a western gate cluster near Weston Road to an eastern community off University Drive can lose 40 minutes in traffic. So we plan Sunrise routes with that split in mind instead of promising a same-day visit we can’t keep. Our Gate Repair team dispatches specifically into Sunrise with realistic arrival windows and live tracking.
What Sunrise customers tell us they appreciate most: the tech shows up on time, explains the failure in plain English, and the invoice matches the quote. We carry parts for LiftMaster, FAAC, BFT, Linear, and Viking on the truck, so most repairs finish in one visit.
Every Sunrise job gets three written guarantees. A price before work begins. A written warranty on the repair itself. And a free second visit if that repair fails within 365 days. No fine print. No “that part isn’t covered” games.
Wood Gate Repair in Sunrise
Wood Gate Repair in Sunrise usually means fixing what happens when a heavy panel meets sandy, irrigation-heavy soil: the hinge post shifts or rots at ground line, and the gate starts dragging or sagging. Homeowners in Sunrise Golf Village, Welleby, and the older sections of Springtree know the pattern well. A patch job on the boards won’t hold when the post footing is the real problem.
Most wood gate repairs in Sunrise run $220 to $480, depending on whether we’re resetting a post, replacing hinges, re-hanging the panel, or doing a combination. If the post is cracked at the base, the fix is a new post with proper concrete footing and drainage away from the wood. We also check the latch alignment so the gate actually latches under its own weight.
Hinge Post Reset and Replacement
In Sunrise’s sandy soil, original hinge posts from the 70s and 80s often weren’t galvanized. Decades of sprinkler overspray wick into the wood, and the post lets go at the ground line. We cut the old post, drill a deeper footing, set a new pressure-treated or steel post, and re-hang the gate so it swings without dragging.
This is a job we’d rather do once. A surface patch on a wobbling post fails within months, sometimes weeks, because the weight of a 10-foot wood gate keeps working the weak point.
Gate Realignment and Lock Repair
When a wood gate no longer lines up with the latch, it’s usually because the post has moved, not because the latch is worn out. We realign the panel, shim or reset hinges, and replace bolt locks or keypad locks as needed. Sunrise homeowners with kids or dogs want a gate that closes and latches securely; that’s what we leave behind.
Driveway Gate Repair in Sunrise
Driveway Gate Repair in Sunrise covers swing gates and slide gates, manual and automatic, from the single-family homes around Nob Hill Road to the gated communities off Pine Island Road. The most common Sunrise failures we see are operator boards burned out from Florida lightning storms, rack tracks jammed with sand and grass clippings, and safety photocells knocked out of alignment by landscape crews.
Typical driveway gate repair in Sunrise runs $180 to $650 before major parts. A new operator board for a LiftMaster or FAAC unit can add $250 to $500, and we quote that before we install it, not after. The price you approve at the door is the price on the invoice.
Automatic Gate Operator Repair
When the operator hums but the gate doesn’t move, or the gate opens and won’t close, the cause is usually a limit switch, a blown capacitor, or a misaligned safety sensor. We test the full run cycle with the obstacle detection system active. After any repair, we run the UL 325 reversal test to confirm the gate reverses when it meets resistance.
Slide Gate Track and Rack Repair
Sunrise slide gates sit close to the ground, and blown sand from canal banks, swales, and St. Augustine lawns gets into the V-track and rack gears. The operator’s obstruction sensor trips and the gate stops halfway. We clean the track, clear the rack teeth, and re-level the gate so it travels smoothly without false stops.
Trusted Brands We Service in Sunrise
We’re factory-familiar with nine major opener brands, and for Sunrise properties we most often work on LiftMaster, FAAC, BFT, Linear, and Viking units. That matters because HOAs in Sunrise ran on FAAC and LiftMaster through the late 90s and early 2000s, and those units need specific boards and photocells, not universal parts. We keep common Sunrise parts in local inventory, so a gate opener repair doesn’t turn into a two-week wait. If your HOA gate still runs an older FAAC hydraulic or a LiftMaster commercial slide operator, we know the wiring and the failure points.
Common Gate Repair Problems We See in Sunrise Homes
- Hinge post rot in sandy, irrigated soil. Sunrise’s lawn irrigation saturates the soil around gate posts, and untreated wood wicks moisture for decades. The post lets go at ground line, and the gate sags within a year of a panel-only repair.
- Safety photocell misalignment on older FAAC and LiftMaster operators. Landscape crews bump the sensors while edging or mulching. The gate gets intermittent no-close faults, and the HOA board gets frustrated. We realign and re-secure the sensors so they stay put.
- Sand and grass clippings in slide gate tracks. Homes along canal banks and swales see more blown sand and mower debris. The track clogs, the built-in obstruction sensor trips, and the gate stops halfway. Track cleaning and re-leveling fixes it.
- Lightning-damaged operator boards. Florida’s afternoon storm season is hard on gate electronics. A nearby strike can fry the control board even when the operator itself looks fine. We replace the board, test the full cycle, and add surge protection when we can.
Pricing for Gate Repair in Sunrise, FL
Here’s what Sunrise homeowners can expect to pay, before parts:
- Service call and diagnosis: $79 to $119, credited toward the repair if you approve the work.
- Hinge or post repair on a wood gate: $220 to $480.
- Operator board replacement: $180 to $520, plus the board itself.
- Photocell realignment or replacement: $140 to $280.
- Full driveway gate realignment with operator testing: $250 to $650.
Parts costs depend on the brand and model. A LiftMaster board for a common residential swing gate runs $180 to $350. A FAAC board runs higher, $300 to $500. We quote the exact price in writing before any work starts, so there’s no version of this story where the invoice is bigger than what you agreed to.
Estimates are free. Call (903) 417-0793 and we’ll give you a straight number over the phone, or send a tech out to diagnose and quote on the spot.
We Also Serve Cities Near Sunrise
Beyond Gate Repair in Sunrise, our South FL crews cover nearby markets including Jacksonville, Miami, Tampa, and Orlando. If your property sits just outside Sunrise in one of those cities, the same Calder pricing and written guarantees apply. Call and we’ll route the nearest available tech.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunrise
Because the hinge post footing is usually the failure point, not the hinge hardware. Sunrise’s sandy, irrigation-heavy soil lets posts shift and rot at the ground line, so the gate drops no matter how many times you swap hinges. The fix is replacing or resetting the post in a deeper footing. Replacing hinges alone puts new hardware on a moving foundation, and the sag returns. Call (903) 417-0793 for a post inspection and a fixed price before any work starts.
UL 325 requires automatic gates to reverse or stop when they contact an obstacle, and to have monitored safety photocells or contact edges. If your gate doesn’t reverse under hand pressure, or if the photocells are misaligned after landscape crews were on the property, the system isn’t compliant. We test the reversal function and all safety edges on every Sunrise repair, and we document the results. Call (903) 417-0793 to schedule a safety check with a written report.
We service all nine major brands, and in Sunrise we most often see LiftMaster, FAAC, BFT, Linear, and Viking operators. We stock common parts for those brands locally, which means most board replacements and photocell fixes happen in one visit. If your HOA gate in Sunrise runs an older FAAC or LiftMaster, we have the manuals, the wiring diagrams, and the experience with those exact units.
Most driveway gate repairs in Sunrise are same-day jobs. Hinge repairs, photocell realignment, track clearing, and operator board swaps usually finish in two to three hours when we have the right part on the truck. Some FAAC boards or specialty parts may need a day or two to source, and we’ll tell you that honestly before we start. Call (903) 417-0793 and we’ll tell you what’s realistic for your situation.
In Sunrise, the usual cause is sand and grass clippings packed into the V-track or rack teeth, which trips the operator’s built-in obstruction sensor. The gate reads the debris as an obstacle and stops. Cleaning the track, clearing the rack, and re-leveling the gate solves it in most cases. If the track is bent or the rack gear is stripped, we replace those sections and retest the full travel. Call (903) 417-0793 for an exact quote.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Sunrise and South FL gate repair needs with upfront pricing and the 365-Day Done Right Promise.