Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterElectric Gate Repair in West Hollywood, CA: What It Costs & How Fast We Arrive
Electric gate repair in West Hollywood typically runs $225 – $485 for most opener and operator failures, with full gate motor replacement landing between $900 and $2,300 depending on the brand and post configuration. We reach most West Hollywood properties within 90 minutes, and every job starts with a written price before any work begins. Call (903) 417-0793 and a live person answers, 24/7.
Fast, Reliable Electric Gate Repair Across West Hollywood
West Hollywood gates live a harder life than most people realize. Between the hillside lots north of Sunset, the tightly packed courtyard buildings off Santa Monica Boulevard, and the older motor courts strung through the Norma Triangle, we see the same story repeat: an opener that worked fine for years suddenly binds, reverses, or quits entirely. That’s where we come in. Calder Gate Repair is the gate repair specialist inside the Relay Home Co. family. We know the streets here, from the steep driveways above Sunset Plaza Drive to the shared alleys behind Kings Road. When your gate stops working, you don’t have time for a four-hour window. Call (903) 417-0793 and a live person books your visit, with a trackable arrival time before the technician leaves our Los Angeles office.
Why Calder Gate Repair Is West Hollywood’s Preferred Electric Gate Repair Company
West Hollywood homeowners ask us the same question: why does my gate fail differently than my friend’s gate in Culver City? The answer usually comes down to this city’s terrain and lot shapes. Hillside runoff undermines hinge post footings. Narrow aprons force swing gates into tight clearances. Shared property lines mean loop detectors pick up traffic from neighboring driveways. We see these failure patterns constantly, which means we diagnose them faster and fix them without a second callback.
Our technicians are background-checked, uniformed, and trained on nine opener brands, including FAAC, LiftMaster, and BFT. Every repair carries the 365-Day Done Right Promise: if the repair fails within 365 days, Calder returns at no charge. That’s written on every job, not implied. And the price we quote at the door is the price on the invoice. No recalculation, no “discovered damage” markup. Nico Alvarez leads our team, and he built Calder’s process around one idea: a gate repair should be boring. You call, we show up when we said, we fix it, you pay what you approved.
Commercial Gate Operator in West Hollywood
Commercial gate operators in West Hollywood handle far more cycles per day than residential openers, and the apartment buildings and parking garages along La Cienega and Melrose put serious strain on gate motors, control boards, and safety loops. When a commercial operator fails, it usually fails under load: a slide gate jumps its track, a barrier arm doesn’t seat, or a hydraulic pump starts leaking. We service them all, and most commercial operator repairs in West Hollywood run $495 – $1,850 before parts, depending on whether the motor, the board, or the mechanical drive is the culprit.
Commercial work also means UL 325 compliance and entrapment protection. We test photoeyes, pressure edges, and loop detectors on every visit, not just on new installs. If your gate doesn’t pass, it doesn’t reopen.
Oversized Vehicle Gates and Parking Garages
For gated parking structures and commercial lots, the operator is only part of the equation. Track alignment, roller wear, and limit switch calibration determine whether the gate closes fully or holds open. We set limits precisely because a gate that doesn’t seat is an invitation to post-theft entries.
West Hollywood commercial properties often share gates across multiple tenants, which means loop detector false triggers from adjacent traffic are common. Our Electric Gate Repair team repositions loops and adjusts sensitivity so the gate only opens when it should.
Automatic Gate Repair in West Hollywood
Automatic gate repair in West Hollywood usually means one of three things: an opener that hums but doesn’t move, a gate that reverses mid-travel, or a keypad and remote that stopped talking to the board. We diagnose all three on the first visit. Most automatic gate repairs in West Hollywood run $225 – $485, with motor or control board replacement pushing $900 – $2,300 when the existing hardware is beyond saving.
We were called to a hillside property off Sunset Plaza Drive where a LiftMaster swing gate had begun stopping mid-travel and reversing erratically, especially after rain. Our tech found the hinge post had shifted slightly due to runoff undermining the post footing, causing the gate to bind and the operator to over-torque. We reset and re-poured the footing, corrected the sag at the hinge post, replaced the worn rack and pinion, and re-aimed the safety photocells so the gate now cycles smoothly and holds its reversal test under UL 325.
Hinge Post and Footing Repair
When a gate sags or scrapes, the hinge post is usually the root cause, not the hinge itself. On hillside lots, post footings get undermined by runoff and the whole post tilts. We re-set posts in concrete and re-square the gate so the operator isn’t fighting gravity on every cycle.
A gate that scrapes or binds burns out motors prematurely. Correcting the mechanical alignment before touching the electronics is the difference between a repair that lasts and one that fails again in six months.
Loop Detector and Safety Photocell Faults
Automatic gates in West Hollywood often sit close to sidewalks and shared driveways. That means loop detectors pick up pedestrians, delivery trucks, or the neighbor’s car. We reposition loops and recalibrate sensitivity so your gate opens for you, not for every passing scooter.
Trusted Brands We Service in West Hollywood
We’re factory-familiar with nine major opener brands, but the ones we service most often in West Hollywood are FAAC, BFT, Linear, and Viking. These brands dominate the mid-century motor courts and newer courtyard buildings scattered across the city. Because our techs carry common FAAC and BFT control boards, limit switches, and receiver modules on their trucks, we finish most repairs in one visit instead of ordering parts and returning a week later. That’s a big deal when your gate is stuck open and your courtyard is suddenly a public walkway. If we don’t have the part on the truck, we give you a written lead time before we leave. No mystery waiting.
Common Electric Gate Repair Problems We See in West Hollywood Homes
- Hinge post shifting from hillside runoff. Properties north of Sunset Boulevard, especially along Sunset Plaza Drive and the Bird Streets, sit on slopes where drainage follows the driveway line. Runoff washes soil from under post footings, the post tilts, the gate binds, and the operator over-torques until something fails. The fix is a new footing and re-squaring the gate, not a new motor.
- Loop detector false triggers on shared driveways. Duplexes, courtyard apartments, and alley-adjacent homes near Fairfax and Santa Monica Boulevard often share drive aisles. A loop set too sensitive opens gates for every passing delivery van or neighbor backing out. We tune loop sensitivity and reposition detectors so only actual vehicles on your apron trigger the opening cycle.
- Safety photocell misalignment in tight courtyard entries. When landscaping grows into a narrow entry, it knocks photocells out of alignment. The gate reverses constantly or refuses to close, and it fails a UL 325 entrapment check. We re-aim the sensors and often re-route the wiring so plants and planters stop being part of the problem.
- Control board failure after power flickers. Older opener boards in West Hollywood homes, especially FAAC and BFT models, don’t handle the city’s occasional transformer-level flickers well. The board loses its limits or forgets remote codes, and the gate starts behaving unpredictably. A board replacement usually restores normal operation within the hour.
Pricing for Electric Gate Repair in West Hollywood, CA
Here’s what you can expect to pay in West Hollywood, based on the work we actually do week to week.
- Gate motor repair: $225 – $485
- Control board replacement: $350 – $775
- Hinge post re-setting with new footing: $500 – $1,100
- Safety photocell or loop detector repair: $180 – $320
- Full gate operator replacement (residential): $900 – $2,300
- Commercial gate operator replacement: $1,200 – $3,800
What moves the number? Gate length and weight, post condition, whether we’re pulling new wire or reusing existing conduit, and the brand of opener you own. Every job starts with a written estimate before any work begins. The price you approve is the price you pay. Call (903) 417-0793 for a free estimate and a live person who can book the visit while you’re on the call.
We Also Serve Cities Near West Hollywood
Calder Gate Repair covers the surrounding area, including Beverly Hills, Culver City, Glendale, and Burbank. If you’re checking whether we handle Electric Gate Repair in West Hollywood specifically, the answer is yes: we dispatch daily to every neighborhood in the city, from the Norma Triangle and West Hollywood West up into the hills. Our Los Angeles office coordinates all scheduling across the region.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in West Hollywood
Check the safety photocells first. In West Hollywood’s tight courtyard entries, landscaping or a shifted planter can block or misalign the beam, which tells the gate to reverse as a safety precaution. Look for a small LED on each photocell; if one blinks or is off, the beam is interrupted. If both lights are solid, the problem may be a failing control board or a loop detector triggering a false signal. We see this constantly, and most fixes run $180 – $320. Call (903) 417-0793 and describe what you see, our technician will confirm the likely cause before we arrive.
Plan on two to five days for a full electric gate installation in West Hollywood, depending on whether we’re setting new posts, pouring footings, and running power from the house. New posts need concrete to cure before we hang the gate and adjust the operator. A like-for-like opener swap on existing posts can happen in one day. We never promise same-day installation, because concrete and conduit work can’t be rushed. What we do promise is a written schedule and a written price before any work starts.
Yes. LiftMaster and FAAC are two of the most common openers we repair in West Hollywood, especially FAAC hydraulic operators on hillside swing gates and LiftMaster slide operators on larger residential lots and small commercial gates. Our techs carry common control boards, remote receivers, and limit switches for both brands, which means most repairs finish in one visit. BFT, Linear, and Viking are also in our regular rotation.
Because the panel wasn’t the problem. In West Hollywood’s hillside lots, runoff undermines hinge post footings and the post tilts. That tilt is what makes the gate sag, drag, and eventually burn out the motor. Fixing the panel or the hinge alone doesn’t address the post. We re-set the footing, correct the lean, and then re-swing the gate so it clears cleanly. Until the post is solid, any other repair is temporary. This is the single most common root cause we correct in the hills above Sunset Boulevard.
Every automatic gate must meet UL 325 entrapment protection standards, which means at least one primary and one secondary safety device: photocells, contact edges, or loop detectors that reverse the gate if something is in its path. California code also requires a manual release so the gate can be operated by hand during a power outage. We test reversal force, photocell alignment, and pressure-edge function on every repair visit and provide a written record of the results. If your gate doesn’t pass, we’ll quote the correction and you approve the price before we touch anything.
Call Calder Gate Repair for Your West Hollywood Gate Today
A gate that won’t open is a problem. A gate that won’t close is a security issue. Either way, you want it handled today, by someone who knows exactly what they’re looking at. Call (903) 417-0793 and a live person answers, 24 hours a day. We’ll give you a free estimate over the phone, a written price before any work begins, and a trackable arrival time so you’re not hosting a technician’s guess. Calder Gate Repair: written pricing, real arrival times, and a 365-day guarantee on every repair. If it fails within the year, we come back free. That’s the whole point.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving West Hollywood with electric gate repair and opener service.