Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lakewood, CA
Calder Gate Repair is the gate company Lakewood homeowners call when a gate stops opening, starts grinding, or refuses to close all the way. Most gate repairs in Lakewood run between $180 and $480 depending on what failed, and we quote every job in writing before any work begins. If you’re searching for a gate company that shows up on time, knows LiftMaster and Viking openers inside and out, and backs the repair for a full year, call (903) 417-0793 and a live person will answer.
Why Lakewood Homes Are Different
Lakewood is a grid of clean, mid-century neighborhoods where a lot of homes were built between the late 1940s and early 1960s. That matters for gate work. The original driveway gates, where they still exist, are often steel tube frames on concrete footings that have shifted over 60-plus Southern California summers. The newer gates in neighborhoods like Lakewood Mutual Manor and the tracts near Mayfair Park are usually aluminum with automated openers, and those have their own failure patterns: limit switches that drift, control boards that cook in direct sun, and hinge posts that loosen in the sandy, fast-draining soil.
The other thing about Lakewood is the climate. It’s not as hot as the Valley and not as damp as Long Beach, but the marine layer rolls through most mornings and burns off by noon. That daily moisture-and-sun cycle is rough on exposed opener boxes and wiring connections. We regularly see corroded terminals and swollen seals on gate openers less than five years old here. And because Lakewood enforces clear sightlines and setback rules on driveway gates, any repair that changes the gate’s position or swing usually needs to match the original installation footprint.
Our Main Lakewood Services
Nearly every call we take in Lakewood falls into one of three jobs: a gate that won’t move, an opener that quit, or a repair that needs to happen today because the gate is stuck open and the dog’s loose. Here’s what each service involves in Lakewood.
Gate Repair in Lakewood
A Lakewood gate that drags on the driveway or sits crooked in its frame is usually a hinge or post problem, not an opener problem. We rebuild sagging gate frames, re-set posts that have shifted in Lakewood’s sandy soil, and replace broken wheels, rollers, and hardware on sliding and swing gates. If your gate still works but looks and sounds wrong, that’s the time to catch it – before a hinge tears out and the gate drops. We cover all of it on the Gate Repair in Lakewood page with local pricing and what to expect on the day.
Electric Gate Repair in Lakewood
Electric gates in Lakewood fail most often at the connection points: the wiring run under the driveway, the keypad at the curb, the safety sensors near Lakewood’s frequent morning fog. We trace the full circuit from the panel to the motor, replace corroded wiring and failed capacitors, and test every safety edge before we leave. If your gate opens partway, beeps, or trips its breaker, the Electric Gate Repair in Lakewood page walks through what those symptoms mean and what the repair usually costs here.
Gate Opener Repair in Lakewood
Opener failures are the most common gate problem in Lakewood, and the cause is usually specific: a limit switch that’s drifted, a gear that’s stripped, a control board that got fried by a power surge during a Santa Ana wind event. We train on nine major opener brands so the fix actually matches what’s mounted on your post. If your remote works from 10 feet but not from the street, or the opener runs but the gate doesn’t move, the Gate Opener Repair in Lakewood page covers the diagnosis, the parts, and the real Lakewood price range.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lakewood
We work on virtually every opener a Lakewood homeowner is likely to own, including Viking, Ghost Controls, DoorKing, and Elite. Common parts for these brands are stocked on our trucks, so most opener repairs in Lakewood are completed in a single visit. See our brands page for the full list of nine major manufacturers our technicians are factory-familiar with.
Pricing for Gate Company in Lakewood, CA
| Service | Typical range in Lakewood |
|---|---|
| Hinge replacement or re-weld | $120 – $280 |
| Gate post reset or replacement | $350 – $700 |
| Gate wheel or roller replacement | $90 – $220 |
| Gate opener motor replacement | $400 – $900 |
| Control board replacement | $250 – $550 |
| Limit switch adjustment or replacement | $110 – $240 |
| Keypad or intercom repair | $140 – $320 |
| Safety sensor replacement | $130 – $290 |
| Full gate opener installation | $1,200 – $3,500 |
| Diagnostic service call | $75 – $125 |
What pushes a Lakewood gate repair toward the top of these ranges is usually access: a post set in concrete from 1955 takes longer to extract, and a control board that needs a specific DoorKing or FAAC part may mean a second trip if we don’t have it on the truck. Whatever the number is, we hand you a written price before any work starts, and that’s the number on the invoice.
Neighborhoods We Serve in Lakewood
We cover all of Lakewood, from the older tracts around the Long Beach border to the newer gated communities near Cerritos. Most repair calls in Lakewood get a same-day or next-day visit, and we dispatch techs with a live arrival time you can track.
- Lakewood Mutual Manor
- Mayfair Park area
- Lakewood Village
- The tracts along South Street
- Neighborhoods near Carson Street and the San Gabriel River
Service Area – Cities Near Lakewood
Our Lakewood crews also cover the surrounding South Bay and Gateway Cities. If you’re in Lomita, CA, Torrance, CA, Carson, CA, or Rancho Palos Verdes, CA, the same written-price guarantee and 365-Day Done Right Promise apply. Scheduling and dispatch are coordinated from the brand’s Los Angeles office, with crews serving Lakewood locally.
Serving Lakewood, CA - Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lakewood
Most Lakewood repair calls get scheduled the same day or the next morning. We don’t give you a four-hour window – we give you a live arrival time you can track, and our dispatchers are available by phone 24/7 at (903) 417-0793 if you need an update.
For most in-kind repairs, no permit is needed; you’re replacing a part or fixing hardware that already exists. If a gate post needs to be re-set or the opening is being modified, that can trigger setback and sightline review through Lakewood’s building department, and we’ll flag it before any work starts. Call (903) 417-0793 and we’ll walk through your specific situation.
We cover every neighborhood in Lakewood, from Lakewood Village down to the Cerritos and Long Beach borders. If you’re just outside Lakewood proper, check the cities in the service area section above or call us at (903) 417-0793 and our dispatcher will confirm coverage instantly.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lakewood Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.