Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Opener Repair Across Fort Worth
When your gate opener stops working in Fort Worth, you need someone who understands both the equipment and the ground it sits on. We fix gate openers across Fort Worth every week, from the older ranch-style properties off Camp Bowie Boulevard to newer builds near Alliance and the gated communities along the Chisholm Trail Parkway corridor. Most repairs run $180 – $340 before parts, and we quote the full price in writing before any work starts. Call (903) 417-0793 and a live person answers, 24/7. Not a voicemail. Not a chatbot. A real human who can schedule you and give you a trackable arrival time.
Why Calder Gate Repair Is Fort Worth’s Preferred Gate Opener Repair Company
Calder Gate Repair sits inside the Relay Home Co. family, founded in 2009, and we run our Fort Worth service with one obsession: the gate works when we leave, and you know exactly what you paid and why. Every technician is background-checked, arrives in uniform, and is factory-familiar with nine major opener brands, including FAAC, BFT, Linear, and Viking, the brands we see most often on Fort Worth properties. Our Gate Opener Repair team carries common boards, capacitors, limit switches, and keypad parts in the truck, which means many Fort Worth repairs are done in a single visit.
We work differently than the generalists. You get a written price before anything gets touched. The invoice matches that number. And every repair is covered by our 365-Day Done Right Promise, stated in writing on every job: if the repair fails within 365 days, we return at no charge. Not a pro-rated credit. A free second visit. That guarantee matters when a gate controls access to your entire property and your family depends on it working every time.
Fort Worth’s sprawling lot sizes and clay-heavy soil create specific failure patterns we see over and over, and we built our local service around them. We dispatch from the brand’s Dallas-Fort Worth office, and our crews serve Fort Worth neighborhoods directly, including Tanglewood, Mistletoe Heights, and the River District. You’ll get a live, trackable arrival time on your phone, before-and-after photos of the work, and a digital invoice you can pay from a link. That’s the Relay Standard, and it’s standard on every job.
Gate Opener With Keypad in Fort Worth
Gate Opener With Keypad work in Fort Worth typically runs $160 – $300 for keypad repair or replacement, and $350 – $600 when the keypad connects into a full operator replacement. The keypad is the most-used access point on any Fort Worth gate, and when it fails, it’s usually because North Texas weather found a way in. Our techs regularly open keypads near Lake Worth and Saginaw to find corrosion, failed membrane switches, or wiring that’s been compromised by the heat and storm cycles Fort Worth experiences year-round.
Keypad Diagnostic and Repair
A dead keypad isn’t always a dead keypad. We check the keypad’s output at the control board, test each digit on the membrane, and trace the low-voltage wiring run. On Fort Worth properties with long runs from the house to the gate, we often find the real issue is voltage drop at the keypad, not the keypad itself. Fixing the wire or adding a local power supply costs less than replacing the keypad, and we’ll tell you which one you actually need before doing either.
Keypad Replacement and Programming
When replacement is the right call, we stock universal and brand-specific keypads that work with FAAC, Linear, and Viking systems common in Fort Worth. We program all codes on site, delete old codes, and walk you through setting your own. The job is usually finished in under an hour, and the keypad gets sealed with weatherproof gaskets so the next North Texas thunderstorm doesn’t end your access.
Gate Operator in Fort Worth
Gate Operator repair in Fort Worth is our core work, and the most common scenario is a swing gate operator that has been overloaded by a sagging gate or a hinge post heaved by expansive clay soil. The operator hums, the gate doesn’t move, and the motor destroys itself trying. Replacing the operator without fixing the underlying gate alignment means you’ll be replacing it again in a year or two. We fix both, and the full operator replacement typically runs $1,100 – $2,400 installed, including the operator, mounting, travel limits, and safety testing.
Operator Diagnostics
Every operator repair starts with a diagnostic, which means we test the motor winding, the capacitor, the control board, the limit switches, and the force settings. On Fort Worth properties where the gate sits far from the house on a long wire run, we test incoming voltage at the operator under load. If the voltage drops below the operator’s minimum while the gate is moving, that’s the problem, and no new motor will fix it. The fix is a properly sized power run, and we’ll spec it honestly.
Operator Replacement and Safety Compliance
Any new automatic gate operator installed in Fort Worth needs to meet UL 325 safety requirements, which means photo-eye sensors, proper force settings, and a verified reversal test. We run the full test on every operator installation and show you the reversal working before we leave. Not every repair company does this. It’s the difference between a gate that opens and a gate that’s safe. Our 365-Day Done Right Promise covers the entire operator installation, including the safety system.
Trusted Brands We Service in Fort Worth
Our Fort Worth techs are factory-trained on the brands we see most on local properties: FAAC and BFT, the Italian hydraulic and electromechanical operators common on higher-end gates in neighborhoods like Montserrat and Mira Vista, and Linear and Viking, the American operators you’ll find on older swing and slide gates across the city. We keep common parts for these brands on the truck, which means many Fort Worth repairs happen in one visit instead of two. We’re also familiar with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule for the times a homeowner has something different.
Common Gate Opener Repair Problems We See in Fort Worth Homes
- Operator overload from clay soil movement. Fort Worth’s expansive clay expands and contracts with moisture through the year, heaving hinge posts and binding gates. We see this most often on older properties east of I-35W, where the soil shifts enough to visibly change gate alignment between spring and late summer.
- Voltage drop on long wire runs. Large Fort Worth lots off roads like Boat Club Road and White Settlement Road often mean 200 to 400 feet of wire between the house panel and the gate operator. If that wire is undersized, the opener gets weak power under load, acts erratically, or fails to reverse properly when it hits an obstruction.
- Keypad and loop detector failures after storms. The thunderstorm and hail season that rolls through Fort Worth every spring and early summer is hard on outdoor gate electronics. Poorly sealed keypads fill with water, loop detectors in the driveway short out, and control boards take voltage hits. Sealed enclosures and proper grounding make a measurable difference.
- Premature motor and capacitor failure from forced operation. When a gate binds and the motor keeps fighting it, the capacitor blows or the motor burns out. Many Fort Worth homeowners replace the capacitor only to have it blow again because the gate is still binding. We fix the bind first, which is why our repairs last.
Pricing for Gate Opener Repair in Fort Worth, TX
Fort Worth gate opener repair prices are honest and straightforward with us. Diagnostics run $75 – $125, which we credit toward the repair if you hire us for the work. Common repairs like limit switch replacement, keypad replacement, capacitor replacement, or control board repair typically run $180 – $340 including parts. Full operator replacement runs $1,100 – $2,400 installed, and a full new gate with operator, keypad, and power run typically starts around $3,500 and goes up from there depending on the gate’s width, weight, and power requirements. You’ll get a written price before we start, and that’s the price on the invoice. Call (903) 417-0793 for a free estimate on any of this.
We Also Serve Cities Near Fort Worth
Our Fort Worth crews also cover the surrounding communities, including Haltom City, North Richland Hills, Hurst, and Kennedale. If you’re in one of those areas and searching for Gate Opener Repair in Fort Worth, you’re in our service area, and the same written pricing and 365-Day Done Right Promise apply. Call us and we’ll tell you exactly when we can be there.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Fort Worth
In Fort Worth, the most common cause is the gate binding because expansive clay soil has heaved the hinge post and overloaded the operator. The motor hums because it’s getting power and trying to move, but the gate’s physical resistance is greater than the operator’s force. We fix the post or gate alignment, resurface the footing if needed, and the operator works again. If the motor or capacitor has been damaged by running against that resistance, we replace those too, and the repair is covered by our 365-Day Done Right Promise. Call (903) 417-0793 for a diagnostic.
A full gate opener installation in Fort Worth typically takes one full day, and sometimes two when the job includes new post footings, a longer power run, or concrete work that needs to cure. Unlike a repair, a proper installation is measured, ordered, and scheduled. Any company promising same-day installation on a new operator is likely skipping the safety testing, foundation work, or power-sizing that makes the installation last. We give you a written schedule and a written price before any work begins.
Yes. Any automatic gate operator installed in Fort Worth must meet UL 325 safety standards, which require photo-eye sensors, proper force settings, and a verified reversal test so the gate reverses if it contacts a person, vehicle, or object. This is not optional. We install and test photocells on every operator installation and many repairs, and we show you the reversal working before we leave. If your current gate doesn’t have working photocells, that’s a safety issue we’ll flag and fix.
North Texas storms push water into poorly sealed outdoor keypads, and water damage to the membrane switch or the wiring connections is the leading cause of post-storm keypad failures we see in Fort Worth. In some cases the fix is as simple as drying and resealing the keypad. In others, moisture has corroded the circuit board and the keypad needs replacing. We seal replacement keypads with weatherproof gaskets so the next storm doesn’t create the same problem. Call (903) 417-0793 and we’ll diagnose it, often the same day.
Yes, solar gate openers work well on many Fort Worth properties, especially the larger lots where running a power line to the gate would be expensive. North Texas gets enough sun year-round to keep a solar operator charged, but you need a properly sized panel and battery for your specific operator and gate weight. We’ve installed solar systems on properties in far west Fort Worth and along the Parker County line with good results. The key is honest sizing, not guessing, and we spec every solar installation with the right panel, battery, and regulator for the gate’s actual use.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Fort Worth through the Relay Home Co. family.