Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Opener Repair Across Kennedale
A gate opener that won’t open, won’t close, or reverses mid-cycle is more than an inconvenience in Kennedale – it’s a security gap on a property that often sits on a larger lot with real distance between the road and the front door. Most gate opener repairs in Kennedale run between $180 and $480 before parts, and Calder Gate Repair typically has a technician at your gate the same day you call. We work on LiftMaster, FAAC, Linear, Viking, Ghost Controls, DoorKing, and other major brands, and every job starts with a written price before any work begins. Call (903) 417-0793 and a live person answers – 24 hours a day, no voicemail tree.

Why Calder Gate Repair Is Kennedale’s Preferred Gate Opener Repair Company
Kennedale properties aren’t like homes in Arlington or Fort Worth. The lots are bigger, the driveways are longer, and the soil underneath everything is clay that swells after rain and shrinks through dry spells. Our technicians know that a gate operator failing on Kennedale Parkway at 7 a.m. is likely fighting a hinge post that heaved overnight – not a dead control board. That local read saves you money.
Calder Gate Repair is the dedicated gate division inside the Relay Home Co. family, established in 2009. Every Kennedale job carries the same three non-negotiables: a written price before we touch a single bolt, a written guarantee on every repair, and a free return visit if the repair fails within 365 days under our Done Right Promise. You’ll also get a live, trackable arrival time when our background-checked, uniformed technician is dispatched – not a four-hour window.
Nico Alvarez leads our gate repair team, and he’s the one who set our standard for plain talk: we name the exact part, explain what it does, and put the dollar figure on paper before you commit. Kennedale homeowners don’t need jargon or vague promises. They need a gate that works, a price they agreed to, and someone who picks up the phone.
Gate Servicing in Kennedale
Gate servicing in Kennedale is preventive maintenance for the machinery that opens and closes your gate, and on the rural-residential lots common around Kennedale it’s the difference between a gate that lasts 15 years and one that eats a control board every two. A full service call runs $120 to $220 depending on gate type, and it includes cleaning and lubricating tracks and hinges, checking limit switches (the small sensors that tell the gate when to stop), testing safety edges and photocells, tightening motor mounts, and measuring voltage at the operator.
Seasonal Checks for Clay-Soil Lots
Kennedale sits on clay that heaves through the wet-dry cycle. We check hinge posts for vertical movement and slide gate tracks for binding when soil shifts. A post that moved half an inch can throw a swing gate out of plumb and stall the operator mid-travel.
Voltage and Loop Detector Testing
Long driveway runs mean power travels farther underground. We measure actual voltage at the operator, not just at the breaker, and test loop detectors for nuisance triggers from water pooling or shifting pavement. Catch a voltage drop before it cooks a board.
Gate Intercom in Kennedale
Gate intercom service in Kennedale keeps the call box at the driveway talking to the phone or handset inside your house, and on larger lots here the intercom often runs on a separate underground line that’s exposed to the same voltage issues as the operator. Repairs typically run $90 to $260: that might be a new keypad face, a damaged wire spliced, a relay replaced at the control board, or a whole call box swapped after a storm flooded its housing.
Keypad and Call Box Failures
Kennedale’s summer heat and spring storms crack keypad membranes and fog display screens. We replace them with weather-sealed parts and seal the housing edges, so moisture doesn’t creep back in.
Wiring and Range Fixes
If your gate intercom rings but voices cut out, or the video feed drops at night, it’s often a corroded connection at the pedestal or a power supply running low. We test the full run from house to gate and repair only what’s failing, with the price agreed before we start.

Trusted Brands We Service in Kennedale
Our technicians are factory-familiar with nine major gate opener brands, and in Kennedale we regularly service Linear, Viking, Ghost Controls, and DoorKing alongside LiftMaster, FAAC, BFT, Elite, and Mighty Mule. Because we stock common parts for these brands in our DFW inventory, turnarounds are fast – a Linear swing arm on a ranch entrance off Mansfield Highway or a DoorKing slide operator on a property near Kennedale Parkway doesn’t have to wait on a parts shipment from out of state. If we need an uncommon board for a Viking or Ghost Controls unit, we tell you exactly how long the order takes before you spend anything.
Common Gate Opener Repair Problems We See in Kennedale Homes
- Clay heave throws hinge posts out of plumb. North Texas wet-dry cycles move the soil under gate posts. A swing gate that drags, binds, or stalls mid-travel is usually a post problem, not an operator problem – we reset and secure the footing before blaming the motor.
- Voltage drop on long driveway runs. Kennedale’s larger lots mean longer underground power runs. Operators under-fed by 10 or 15 volts trip control boards and loop detectors. We measure the actual voltage at the operator and correct the feed.
- Fogged or misaligned safety photocells. After storms, photocells on rural driveways collect moisture and trigger phantom reversals or no-reverse faults. This is one of the most common “my gate opens then immediately reverses” calls we field.
- Worn limit switches on high-cycle gates. Gates that open 20 or more times a day – common on shared driveways off Kennedale Parkway – wear limit switches sooner. Symptoms include the gate stopping short, over-traveling, or grinding at the end of travel.
Pricing for Gate Opener Repair in Kennedale, TX
Most gate opener repairs in Kennedale run $180 to $480 before parts, and we break that down honestly: service call and on-site diagnosis $75 to $90, control board replacement $200 to $550, safety photocell pair $40 to $130, limit switch $30 to $90, gear or chain drive replacement $150 to $380. Intercom repairs typically add $90 to $260. A full gate servicing runs $120 to $220. The biggest cost driver is whether the fault is the operator itself or the gate structure – a sagging gate can destroy a good operator, and we won’t sell you a new board without telling you the post needs fixing first. Every quote is written and agreed before work starts. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Kennedale
Kennedale sits between Arlington and Mansfield, and our crews cover the whole corridor. We provide Gate Opener Repair in Arlington, Mansfield, Burleson, and Fort Worth too. Same written-price guarantee, same 365-day Done Right Promise, same live-person phone line at (903) 417-0793. If you’re in a neighboring city, you’ll get the same level of service we bring to Kennedale.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Kennedale
A gate that reverses mid-cycle with nothing in the way is usually a safety photocell problem – fogged, dirty, or misaligned lenses cause the operator to think something is blocking the gate, and clay-soil heaving on your post can throw the beam out of alignment. We clean or replace the photocell pair and re-square the beam, then run a full reversal test. If it’s still reversing, the issue is in the control board or a frayed wire along the run. Call (903) 417-0793 and we’ll diagnose it the same day.
Almost always the gate. On Kennedale’s clay soil, hinge posts heave with the seasons, and the gate panels pulls out of square. The operator strains against that extra resistance and will eventually burn out a gear or a board. We fix it the right way: reset the post footing, re-hang the panel, then check the operator for damage. Do not keep running it – strain today becomes a $400 board tomorrow. Call us at (903) 417-0793 for an honest assessment.
Yes. We service LiftMaster, FAAC, and DoorKing regularly, plus Linear, Viking, Ghost Controls, BFT, Elite, and Mighty Mule. Our techs are factory-familiar with all nine brands, and we keep common parts in our DFW inventory so Kennedale calls don’t wait on long shipping. Tell us the brand and model when you call (903) 417-0793 and we’ll bring the right parts on the first visit.
No – not on a proper installation, and we won’t pretend otherwise. A real gate opener installation in Kennedale involves measured footing work, a power run, mounting and setting the operator, installing safety edges and photocells, and running full entrapment reversal tests. That’s scheduled work, usually a half to a full day on site after we’ve assessed your gate and layout. What we do same day is repair a malfunctioning opener. For installations, we’ll give you a written price and a realistic schedule. Call (903) 417-0793 and we’ll come measure for free.
Texas automatic gates must have at least two independent safety systems – typically a monitored safety edge or reversing sensor plus a non-contact device like photocell beams – and they must be installed and tested to reverse on contact. That’s a safety regulation, not an upsell, and we run reversal tests on every install and every repair before we call the job complete. If your gate isn’t reversing on contact, stop using it and call us immediately – that’s a serious risk to kids and pets on Kennedale properties. (903) 417-0793.
Need a gate opener fixed in Kennedale? Call Calder Gate Repair at (903) 417-0793 now for a free estimate. A live person answers 24/7, and you’ll get a written price before any work starts.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Kennedale and the surrounding DFW area.





Before
After
Before
After
Before
After