Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kennedale, TX
Calder Gate Repair is the gate company Kennedale homeowners call when a driveway gate stops opening, a swing gate starts grinding, or an opener keypad goes dead. Most gate repair jobs in Kennedale run between $180 and $500, and we quote the full price in writing before any bolt is touched. Kennedale’s mix of larger fenced lots, older custom gates, and newer subdivision builds means we see everything from sun-baked control boards to sagging steel frames on caliche driveways. Call (903) 417-0793 and a live person answers, day or night.
Why Kennedale Homes Are Different
Kennedale sits at the southeastern edge of the DFW sprawl, where the lots get bigger and the soil gets meaner. A lot of the gates we service near the Kennedale Speedway Park corridor and up toward the Sublett Road side are heavier custom steel jobs on properties with real setbacks. The blackland clay here shrinks and swells aggressively, which means gate posts shift over time and gate frames that fit perfectly five years ago now catch on the latch or drag across the drive.
Summers in Kennedale are brutal on electronics. Control boards mounted in direct sun near Dick Price Road or Little Road bake in July heat, and circuit failures spike in August. Winter freezes are rarer but they do hit, and we see cracked plastic limit switch housings and brittle wire insulation after cold snaps. Driveway gate openers in Kennedale also work harder than they should because of the wind that whips across the open lots in the southern part of town – poorly adjusted safety edges trigger false stops, and gearboxes wear faster when gates fight the wind every cycle. Homeowners here tend to value gates that actually secure the property, not just decorate the entrance, and we repair accordingly.
Our Main Kennedale Services
The two calls we get most from Kennedale homeowners are for gates that stopped moving altogether and for opener systems that act possessed – beeping, reversing, or ignoring remotes. Each service below has its own dedicated Kennedale page with its own pricing table and FAQ.
Gate Repair in Kennedale
A gate that won’t open or close cleanly is usually a mechanical problem: bent hinge, sagging frame, rusted roller, or a latch that no longer lines up. In Kennedale, soil movement under concrete gate posts is a major cause of misalignment, and we regularly find the post-side hinge pulling away from the frame on gates along the New Hope Road area. We rebuild hinge mounts, straighten frames, and re-set gate posts when needed – then we test the full travel cycle before we leave. Gate Repair in Kennedale covers pricing and what to expect on service day.
Electric Gate Repair in Kennedale
When a gate has power but still misbehaves, the issue usually lies in the electrical path: a failed capacitor, a burned contactor, a short in the underground wire run, or a limit switch – the small sensor that tells the gate when to stop. Kennedale’s wide temperature swings stress electrical connections, and we also see more lightning-damaged boards than you might expect on properties near open pasture. We diagnose from the board outward, replace only what has actually failed, and include the repair in your written quote before work begins. Electric Gate Repair in Kennedale has the full breakdown.
Gate Opener Repair in Kennedale
If your remote stopped working or the opener hums without moving the gate, you have an opener problem. We repair and replace opener arms, control boards, receivers, and keypads across all the major brands installed in Kennedale. Because this area has everything from old chain-drive openers on custom ranch gates to newer smart-enabled units on subdivision homes off Kennedale Sublett Road, we keep a broad diagnostic and parts workflow ready. Gate Opener Repair in Kennedale covers opener-specific pricing and brand support.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kennedale
We work on FAAC, BFT, Linear, and Viking gate equipment regularly in Kennedale, and our techs are factory-familiar with each. We keep common control boards, limit switches, and receiver parts in local stock, which means many opener repairs in Kennedale happen on the first visit instead of days later. See our brands for full coverage details.
Pricing for Gate Company in Kennedale, TX
| Service | Typical range in Kennedale |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair (electrical components) | $200 – $450 before parts |
| Gate frame realignment or hinge rebuild | $250 – $650 |
| Limit switch replacement | $160 – $280 |
| Control board replacement | $260 – $500 before parts |
| Remote or keypad programming | $90 – $160 |
| Safety edge or photo eye replacement | $140 – $260 |
| Gate opener replacement (labor only) | $300 – $600 |
What pushes Kennedale pricing higher than a baseline repair is usually post movement from clay soil, heavier custom gates, or long wire runs on deep-setback properties. Whatever the final number is, you see it in writing before any work starts, and the invoice at the end matches the quote exactly.
Neighborhoods We Serve in Kennedale
We cover all of Kennedale and the immediately surrounding roads. Most Kennedale residents can have a technician on site within a couple of hours, with a live arrival time sent to your phone.
- New Hope Road area
- Sublett Road corridor
- Little Road and surrounding streets
- Kennedale Speedway Park neighborhood
- East Kennedale near the Mansfield edge
Service Area – Cities Near Kennedale
While this page covers Kennedale specifically, our crews also handle gate repair in nearby cities as part of the wider DFW service area. That includes Arlington, WA, Mansfield, TX, Burleson, TX, and Fort Worth, TX. If you are not sure which page covers your address, call us and we will route you to the right local crew.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kennedale
Most Kennedale addresses can have a Calder technician on site within two to four hours, depending on the time of day and current route load. You get a live arrival time you can track, not a four-hour window. For urgent security issues, a live person answers the phone 24/7 at (903) 417-0793 so you never wait on a voicemail.
Routine gate repair and opener replacement generally do not require a permit in Kennedale, but some subdivisions with active HOAs want to review gate appearance or height changes before work begins. If we are replacing an opener or major hardware rather than the gate structure itself, HOA involvement is uncommon. We can confirm what your specific neighborhood requires when you schedule.
Yes. Dispatch and scheduling for Kennedale jobs are coordinated from our Dallas-Fort Worth office, and crews serving Kennedale are local to the area. That keeps response times short and means your technician already knows the Kennedale roads, soil conditions, and common gate hardware before they arrive.
If your gate is stuck, beeping, or refusing to respond to a remote, call (903) 417-0793. A live person answers, the quote is free, and the price you agree to is the price on your invoice – written down before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kennedale Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.