Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Arlington, TX
If you live in Arlington and your gate won’t open, won’t stop, or sounds like it’s tearing itself apart, you’re probably wondering what the repair will cost and whether someone can actually come today. Most gate repairs in Arlington run $180 to $500, depending on the part and the gate’s size. Calder Gate Repair answers the phone live around the clock, dispatches background-checked technicians with a trackable arrival time, and puts every price in writing before any work starts. Call (903) 417-0793 and you’ll skip the voicemail tag.
Arlington isn’t like newer suburbs where every fence and gate went in with the same Home Depot kit. This city has a mix of 1950s ranch homes near the University of Texas at Arlington, 1980s and 1990s subdivision builds around Southeast Arlington and Dalworthington Gardens, and large custom properties on the edges of the city that run storm-rated steel or iron gates with serious operators. The age spread means we’re as likely to replace a rusty chain-drive opener on a 30-year-old slide gate in West Arlington as we are to diagnose a Ghost Controls board that failed after a surge in a newer swing gate. Dallas-Fort Worth weather does half the damage: clay soil that shifts and throws gates out of alignment, spring hail that rusts exposed steel, and July heat that cooks control boards inside unventilated operator boxes. That combination of older mechanical parts, finicky electronics, and soil movement is why Arlington gate work rarely fits a generic video tutorial.
Why Arlington Homes Are Different
Arlington’s clay-rich soil expands and contracts through every wet-dry cycle we get. That matters for gates because the post bases and track beds sit in that soil. A drive gate that was perfectly level in October can be dragging or binding by March. On slide gates, we regularly find cracked guide wheels and bent V-track where the concrete pad shifted and the gate started carrying weight it wasn’t designed to bear. On swing gates, the top hinge pulls away from the post or the bottom corner starts scraping the driveway. The repair is rarely just “tighten some bolts”: the post has to be re-anchored and the operator travel limits re-set, otherwise the opener burns itself out fighting the grade every morning.
Housing stock matters too. Older homes near Central Arlington and along Randol Mill Road often have driveway gates that were retrofitted in the early 2000s, and the wiring was run in conduit that’s now full of water or chewed by fire ants. Those callouts tend to be electrical: bad loop detectors, dead photoelectric eyes, intermittent open limits. Meanwhile, newer construction in Viridian and the master-planned pockets along Lake Arlington is more likely to run a Viking or DoorKing operator with solar backup and battery banks, which brings its own failure points. HOA rules also matter in several Arlington subdivisions: some require the gate design, operator placement, and even the opener model to be reviewed before a replacement. We walk you through what your neighborhood actually enforces rather than leaving you to guess.
Our Main Arlington Services
Arlington homeowners call us most about two things: a gate that physically won’t move, and an opener or electrical component that stopped doing its job. Each has its own dedicated Arlington page below.
Gate Repair in Arlington
Mechanical failures are common across Arlington because of the soil movement we described above: the gate drags, scrapes, sags, or jams partway. Our Gate Repair in Arlington covers the full mechanical rebuild: re-aligning posts, replacing hinges and guide wheels, re-setting tracks, and re-hanging heavy iron gates that have pulled off level. In Arlington neighborhoods with alleys, the rear service gate often takes the worst of it because it’s used daily and rarely maintained. Before any bolting or grinding, you’ll have a written price in hand.
Electric Gate Repair in Arlington
Electric gate failures in Arlington split roughly evenly between power issues (breaker trips, dead transformer, damaged conduit) and control component failures (loop detectors, safety edges, keypads, photocells). Our Electric Gate Repair in Arlington team tests the entire low-voltage chain rather than throwing parts at the symptom, because in this city’s heat and storms, a “board problem” is often a melted wire connection inside a fried junction box. We write the price before the panel comes off.
Gate Opener Repair in Arlington
Gate opener failures in Arlington usually mean the arm, chain, or board gave out. We service and repair Gate Opener Repair in Arlington across Viking, Ghost Controls, DoorKing, and Elite units, among others, and keep common boards and limit switches on the truck so most opener callouts are one visit. On Arlington properties with long driveways, we also check the remote’s antenna routing and range, since interference from nearby power lines or low canopies is a common cause of intermittent operation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Arlington
Our Arlington trucks stock parts and boards for the openers homeowners here actually run: Viking, Ghost Controls, DoorKing, and Elite are among the most common we service. That local stock means many repairs finish same-trip, not “we’ll order the part and come back next week.” See our brands for the full list of what we work on.
Pricing for Gate Company in Arlington, TX
| Service | Typical range in Arlington |
|---|---|
| Gate opener board replacement | $375 – $890 |
| Gate hinge weld / replacement | $160 – $410 |
| Slide gate wheel replacement | $125 – $280 |
| Safety sensor replacement | $170 – $375 |
| Limit switch replacement | $140 – $310 |
| Keypad replacement | $185 – $420 |
| Remote programming / replacement | $95 – $220 |
| Diagnostic service call | $85 – $130 |
What pushes Arlington prices higher is usually heavy steel, long ranch driveways that add operator work, and HOA design constraints that force custom hardware. What you’ll never see is a surprise: every job gets a written price before we touch the gate, and the invoice matches that number to the dollar.
Neighborhoods We Serve in Arlington
We cover all of Arlington, and because our dispatch runs from the Dallas-Fort Worth office with crews stationed locally, response doesn’t stretch into “we’ll get there eventually” territory. Most Arlington calls are reached the same day, and you’ll watch the technician’s location on your phone before they pull up.
- Dalworthington Gardens
- Pantego
- Viridian
- Interlochen
- Southwest Arlington
Service Area – Cities Near Arlington
If you’re on the edge of town or your property sits closer to a neighbor, we also serve Mansfield, TX, Kennedale, TX, Burleson, TX, and Cedar Hill, TX. Same dispatch, same written-price rule, same trackable arrival time.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Arlington
Most Arlington gate repairs are scheduled same day. When you call (903) 417-0793, you’ll speak to a live person who can book a technician with a trackable arrival time, not a four-hour window. Emergency calls for a gate stuck open or a security breach keep that priority all day and night.
Most Arlington gate repairs, such as hinges, openers, sensors, or wheels, don’t require a city permit or HOA review. If a full gate replacement is needed and your neighborhood has design standards, tell us which subdivision you’re in; we’ll note the relevant rules before the work begins instead of after the gate is up.
The price you’re quoted in writing covers the full repair: parts, labor, travel, testing, and cleanup. If the same repair fails within 365 days under our Done Right Promise, Calder Gate Repair returns at no charge. Call (903) 417-0793 for a free estimate on your gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.